aZholtikov/zh_avr_bme280_sensor
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

feat: added sensor pairing to gateway

Browse Source
This commit is contained in:
aZholtikov committed 2026-10-25 08:56:20 +03:00
1 parent 13b74b9306
commit 52f2da6368
4 files changed
+705 -208
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

README.md
+10 -8
View File
@@ -4,17 +4,19 @@
1. Wireless sensor firmware for ATMega168/328 microcontrollers with BME280 temperature, pressure, and humidity sensor.
2. Power consumption in sleep mode approximately 5 uA using Power-down mode.
3. Transmits device identifier, battery voltage, and all three BME280 sensor readings on each measurement cycle.
4. Battery measurement through internal ADC with 1.1 V bandgap reference.
5. Wake-up from Power-down mode by watchdog timer interrupt with configurable interval.
6. Supports ATMega168, ATMega168P, ATMega168PB, ATMega328, ATMega328P, and ATMega328PB.
7. Hardware TWI (I2C) for BME280 communication on PORTC pins PC4 (SDA) and PC5 (SCL).
3. Automatic over-the-air pairing: the sensor requests a device id from the gateway and stores it in EEPROM.
4. Transmits device identifier, battery voltage, and all three BME280 sensor readings (×10 scaling) on each measurement cycle.
5. Battery measurement through internal ADC with 1.1 V bandgap reference.
6. Wake-up from Power-down mode by watchdog timer interrupt with configurable interval.
7. Supports ATMega168, ATMega168P, ATMega168PB, ATMega328, ATMega328P, and ATMega328PB.
8. Hardware TWI (I2C) for BME280 communication on PORTC pins PC4 (SDA) and PC5 (SCL).
## Attention
1. A compatible RF Gateway is required to receive and process transmitted packets.
2. Changing gateway address or channel requires reflashing the microcontroller.
3. The watchdog timer interval is fixed at 8 seconds; the sensor transmits every 38 ticks (~5 minutes).
1. A compatible RF Gateway is required to receive packets and assign a device id during pairing.
2. The watchdog timer interval is fixed at 8 seconds; the sensor transmits every 38 ticks (~5 minutes).
3. Changing gateway address or channel requires reflashing the microcontroller.
4. If the gateway does not respond during pairing, the device enters permanent sleep until reset.
## Using