feat: initial

README.md

@@ -1,3 +1,26 @@
-# zh_avr_bmp280_sensor
+# AVR firmware for BMP280 wireless sensor (nRF24L01+)
 
-AVR firmware for BMP280 wireless sensor (nRF24L01+).
+## Features
+
+1. Wireless sensor firmware for ATMega168/328 microcontrollers with BMP280 temperature and pressure sensor.
+2. Power consumption in sleep mode approximately 5 uA using Power-down mode.
+3. Transmits device identifier, battery voltage, temperature, and pressure readings on each measurement cycle.
+4. Battery measurement through internal ADC with 1.1 V bandgap reference.
+5. Wake-up from Power-down mode by watchdog timer interrupt with ~8 second interval.
+6. Supports ATMega168, ATMega168P, ATMega168PB, ATMega328, ATMega328P, and ATMega328PB.
+7. Hardware TWI (I2C) for BMP280 communication on PORTC pins PC4 (SDA) and PC5 (SCL).
+
+## Attention
+
+1. A compatible RF Gateway is required to receive and process transmitted packets.
+2. Changing gateway address or channel requires reflashing the microcontroller.
+3. The watchdog timer interval is fixed at ~8 seconds; the sensor transmits every 38 ticks (~5 minutes).
+
+## Using
+
+In an existing PlatformIO project, run the following command to install the firmware:
+
+```bash
+cd your_project
+git clone https://github.com/aZholtikov/zh_avr_bmp280_sensor
+```