wip.

.gitignore

@@ -1,4 +1,4 @@
+build
 .vscode
 .DS_Store
-build
 sdkconfig.old

.gitmodules

@@ -1,9 +1,6 @@
 [submodule "components/zh_pcf8574"]
 	path = components/zh_pcf8574
-	url = http://git.zh.com.ru/esp_components/zh_pcf8574
+	url = http://git.zh.com.ru/alexey.zholtikov/zh_pcf8574
 [submodule "components/zh_vector"]
 	path = components/zh_vector
-	url = http://git.zh.com.ru/esp_components/zh_vector
+	url = http://git.zh.com.ru/alexey.zholtikov/zh_vector
-[submodule "components/zh_ota_server"]
-	path = components/zh_ota_server
-	url = http://git.zh.com.ru/esp_components/zh_ota_server

README.md

@@ -1,15 +1,3 @@
-# ATE0004
+# ate0004.000.000
 
-Honeywell Retractable Landing Light CMM 33-42-07 P/N 45-0351-X Motor Test Box.
+Honeywell Retractable Landing Light CMM 33-42-07 P/N 45-0351-X Motor Test Box.
-
-## Build and flash
-
-Run the following command to firmware build and flash module:
-
-```text
-cd your_projects_folder
-git clone --recurse-submodules http://git.zh.com.ru/aerotech/ate0004
-cd ate0004
-idf.py build
-idf.py flash
-```

main/CMakeLists.txt

@@ -1 +1 @@
-idf_component_register(SRCS "ate0004.c" INCLUDE_DIRS "" REQUIRES zh_pcf8574 esp_wifi nvs_flash zh_ota_server)
+idf_component_register(SRCS "main.c" INCLUDE_DIRS "" REQUIRES zh_pcf8574)

main/ate0004.c

@@ -1,175 +0,0 @@
-#include "ate0004.h"
-
-static i2c_master_bus_handle_t i2c_bus_handle = NULL;
-static httpd_handle_t webserver_handle = NULL;
-
-static zh_pcf8574_handle_t button_handle = {0};
-static zh_pcf8574_handle_t led_handle = {0};
-static zh_pcf8574_handle_t relay_handle = {0};
-
-static bool is_ts = true;
-static bool is_ret = false;
-static bool is_ext = false;
-
-static void zh_wifi_softap_init(void);
-static void zh_webserver_init(void);
-static void zh_gpio_init(void);
-static void zh_io_expander_init(void);
-static void zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data);
-
-void app_main(void)
-{
-    nvs_flash_init();
-    esp_event_loop_create_default();
-    zh_wifi_softap_init();
-    zh_webserver_init();
-    zh_gpio_init();
-    gpio_set_level(TRIAC_GPIO, LOW);
-    zh_io_expander_init();
-    zh_pcf8574_write_gpio(&led_handle, TS_LED_GREEN, LED_ON);
-    zh_pcf8574_write_gpio(&led_handle, RET_LED_BLUE, LED_ON);
-    zh_pcf8574_write_gpio(&led_handle, EXT_LED_BLUE, LED_ON);
-}
-
-static void zh_wifi_softap_init(void)
-{
-    esp_netif_init();
-    esp_netif_create_default_wifi_ap();
-    wifi_init_config_t wifi_config = WIFI_INIT_CONFIG_DEFAULT();
-    esp_wifi_init(&wifi_config);
-    wifi_config_t ap_config = {
-        .ap = {
-            .ssid = WIFI_SSID,
-            .password = WIFI_PASS,
-            .max_connection = 4,
-            .authmode = WIFI_AUTH_WPA2_PSK,
-        },
-    };
-    esp_wifi_set_mode(WIFI_MODE_AP);
-    esp_wifi_set_config(WIFI_IF_AP, &ap_config);
-    esp_wifi_start();
-}
-
-static void zh_webserver_init(void)
-{
-    httpd_config_t config = HTTPD_DEFAULT_CONFIG();
-    httpd_start(&webserver_handle, &config);
-    zh_ota_server_init(webserver_handle);
-}
-
-static void zh_gpio_init(void)
-{
-    gpio_config_t triac_pin_config = {
-        .intr_type = GPIO_INTR_DISABLE,
-        .mode = GPIO_MODE_OUTPUT,
-        .pin_bit_mask = (1ULL << TRIAC_GPIO),
-        .pull_down_en = GPIO_PULLDOWN_DISABLE,
-        .pull_up_en = GPIO_PULLUP_DISABLE,
-    };
-    gpio_config(&triac_pin_config);
-}
-
-static void zh_io_expander_init(void)
-{
-    i2c_master_bus_config_t i2c_bus_config = {
-        .clk_source = I2C_CLK_SRC_DEFAULT,
-        .scl_io_num = GPIO_NUM_22,
-        .sda_io_num = GPIO_NUM_21,
-        .glitch_ignore_cnt = 7,
-    };
-    i2c_new_master_bus(&i2c_bus_config, &i2c_bus_handle);
-    esp_event_handler_instance_register(ZH_PCF8574, ESP_EVENT_ANY_ID, &zh_pcf8574_event_handler, NULL, NULL);
-    zh_pcf8574_init_config_t config = ZH_PCF8574_INIT_CONFIG_DEFAULT();
-    config.i2c_handle = i2c_bus_handle;
-    config.i2c_address = LED_I2C_ADDRESS;
-    zh_pcf8574_init(&config, &led_handle);
-    config.i2c_address = RELAY_I2C_ADDRESS;
-    zh_pcf8574_init(&config, &relay_handle);
-    config.i2c_address = BUTTON_I2C_ADDRESS;
-    config.p0_gpio_work_mode = true;
-    config.p1_gpio_work_mode = true;
-    config.p2_gpio_work_mode = true;
-    config.interrupt_gpio = GPIO_NUM_17;
-    zh_pcf8574_init(&config, &button_handle);
-}
-
-static void zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data)
-{
-    zh_pcf8574_event_on_isr_t *event = event_data;
-    switch (event->gpio_number)
-    {
-    case TS_BUTTON:
-        if (event->gpio_level == LOW && is_ret == false && is_ext == false)
-        {
-            if (is_ts == true)
-            {
-                zh_pcf8574_write_gpio(&led_handle, TS_LED_RED, LED_ON);
-                zh_pcf8574_write_gpio(&led_handle, TS_LED_GREEN, LED_OFF);
-                zh_pcf8574_write_gpio(&relay_handle, TS_RELAY, RELAY_ON);
-                is_ts = false;
-            }
-            else
-            {
-                zh_pcf8574_write_gpio(&led_handle, TS_LED_RED, LED_OFF);
-                zh_pcf8574_write_gpio(&led_handle, TS_LED_GREEN, LED_ON);
-                zh_pcf8574_write_gpio(&relay_handle, TS_RELAY, RELAY_OFF);
-                is_ts = true;
-            }
-        }
-        break;
-    case RET_BUTTON:
-        if (is_ext == true)
-        {
-            break;
-        }
-        if (event->gpio_level == LOW)
-        {
-            is_ret = true;
-            zh_pcf8574_write_gpio(&led_handle, RET_LED_BLUE, LED_OFF);
-            zh_pcf8574_write_gpio(&led_handle, RET_LED_GREEN, LED_ON);
-            zh_pcf8574_write_gpio(&relay_handle, RET_RELAY, RELAY_ON);
-            zh_pcf8574_write_gpio(&relay_handle, GROUND_RELAY, RELAY_ON);
-            vTaskDelay(20 / portTICK_PERIOD_MS);
-            gpio_set_level(TRIAC_GPIO, HIGH);
-        }
-        else
-        {
-            gpio_set_level(TRIAC_GPIO, LOW);
-            vTaskDelay(1 / portTICK_PERIOD_MS);
-            zh_pcf8574_write_gpio(&led_handle, RET_LED_BLUE, LED_ON);
-            zh_pcf8574_write_gpio(&led_handle, RET_LED_GREEN, LED_OFF);
-            zh_pcf8574_write_gpio(&relay_handle, RET_RELAY, RELAY_OFF);
-            zh_pcf8574_write_gpio(&relay_handle, GROUND_RELAY, RELAY_OFF);
-            is_ret = false;
-        }
-        break;
-    case EXT_BUTTON:
-        if (is_ret == true)
-        {
-            break;
-        }
-        if (event->gpio_level == LOW)
-        {
-            is_ext = true;
-            zh_pcf8574_write_gpio(&led_handle, EXT_LED_BLUE, LED_OFF);
-            zh_pcf8574_write_gpio(&led_handle, EXT_LED_GREEN, LED_ON);
-            zh_pcf8574_write_gpio(&relay_handle, EXT_RELAY, RELAY_ON);
-            zh_pcf8574_write_gpio(&relay_handle, GROUND_RELAY, RELAY_ON);
-            vTaskDelay(20 / portTICK_PERIOD_MS);
-            gpio_set_level(TRIAC_GPIO, HIGH);
-        }
-        else
-        {
-            gpio_set_level(TRIAC_GPIO, LOW);
-            vTaskDelay(1 / portTICK_PERIOD_MS);
-            zh_pcf8574_write_gpio(&led_handle, EXT_LED_BLUE, LED_ON);
-            zh_pcf8574_write_gpio(&led_handle, EXT_LED_GREEN, LED_OFF);
-            zh_pcf8574_write_gpio(&relay_handle, EXT_RELAY, RELAY_OFF);
-            zh_pcf8574_write_gpio(&relay_handle, GROUND_RELAY, RELAY_OFF);
-            is_ext = false;
-        }
-        break;
-    default:
-        break;
-    }
-}

main/ate0004.h

@@ -1,51 +0,0 @@
-#pragma once
-
-#include "zh_pcf8574.h"
-#include "nvs_flash.h"
-#include "esp_wifi.h"
-#include "zh_ota_server.h"
-
-#define HIGH true
-#define LOW false
-
-#define LED_OFF LOW
-#define LED_ON HIGH
-
-#define RELAY_OFF LOW
-#define RELAY_ON HIGH
-
-#define TRIAC_GPIO GPIO_NUM_4
-
-#define WIFI_SSID "ATE0004"
-#define WIFI_PASS "repairlab"
-#define WIFI_CHANNEL 1
-#define MAX_STA_CONNECTION 4
-
-#define BUTTON_I2C_ADDRESS 0x22 /*!< U7. */
-#define LED_I2C_ADDRESS 0x21    /*!< U6. */
-#define RELAY_I2C_ADDRESS 0x20  /*!< U5. */
-
-#define GROUND_RELAY 0x00 /*!< Relay K1. RL1 pin on U5. */
-#define TS_RELAY 0x03     /*!< Relay K4. RL4 pin on U5. */
-#define RET_RELAY 0x02    /*!< Relay K3. RL3 pin on U5. */
-#define EXT_RELAY 0x01    /*!< Relay K2. RL2 pin on U5. */
-
-#define TS_BUTTON 0x00  /*!< Connector BT1. B1-0 on U7. */
-#define RET_BUTTON 0x01 /*!< Connector BT2. B2-1 on U7. */
-#define EXT_BUTTON 0x02 /*!< Connector BT3. B3-2 on U7. */
-
-#define TS_LED_RED 0x00    /*!< Connector LE1. 2 PIN. L1-0 pin on U6. */
-#define TS_LED_GREEN 0x01  /*!< Connector LE1. 1 PIN. L1-1 pin on U6. */
-#define RET_LED_BLUE 0x02  /*!< Connector LE2. 2 PIN. L2-2 pin on U6. */
-#define RET_LED_GREEN 0x03 /*!< Connector LE2. 1 PIN. L2-3 pin on U6. */
-#define EXT_LED_BLUE 0x04  /*!< Connector LE3. 2 PIN. L3-4 pin on U6. */
-#define EXT_LED_GREEN 0x05 /*!< Connector LE3. 1 PIN. L3-5 pin on U6. */
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#ifdef __cplusplus
-}
-#endif

main/main.c

@@ -0,0 +1,93 @@
+#include "zh_pcf8574.h"
+
+#define I2C_PORT (I2C_NUM_MAX - 1)
+
+#ifndef CONFIG_IDF_TARGET_ESP8266
+i2c_master_bus_handle_t i2c_bus_handle = NULL;
+#endif
+
+zh_pcf8574_handle_t pcf8574_handle = {0};
+
+void zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data); // Required only if used input GPIO interrupts.
+
+void print_gpio_status(const char *message, uint8_t reg)
+{
+    printf("%s", message);
+    for (uint8_t i = 0; i < 8; ++i)
+    {
+        printf("%c", (reg & 0x80) ? '1' : '0');
+        reg <<= 1;
+    }
+    printf(".\n");
+}
+
+void app_main(void)
+{
+    esp_log_level_set("zh_pcf8574", ESP_LOG_NONE); // For ESP8266 first enable "Component config -> Log output -> Enable log set level" via menuconfig.
+    esp_log_level_set("zh_vector", ESP_LOG_NONE);  // For ESP8266 first enable "Component config -> Log output -> Enable log set level" via menuconfig.
+#ifdef CONFIG_IDF_TARGET_ESP8266
+    i2c_config_t i2c_config = {
+        .mode = I2C_MODE_MASTER,
+        .sda_io_num = GPIO_NUM_4, // In accordance with used chip.
+        .sda_pullup_en = GPIO_PULLUP_ENABLE,
+        .scl_io_num = GPIO_NUM_5, // In accordance with used chip.
+        .scl_pullup_en = GPIO_PULLUP_ENABLE,
+    };
+    i2c_driver_install(I2C_PORT, i2c_config.mode);
+    i2c_param_config(I2C_PORT, &i2c_config);
+#else
+    i2c_master_bus_config_t i2c_bus_config = {
+        .clk_source = I2C_CLK_SRC_DEFAULT,
+        .i2c_port = I2C_PORT,
+        .scl_io_num = GPIO_NUM_22, // In accordance with used chip.
+        .sda_io_num = GPIO_NUM_21, // In accordance with used chip.
+        .glitch_ignore_cnt = 7,
+        .flags.enable_internal_pullup = true,
+    };
+    i2c_new_master_bus(&i2c_bus_config, &i2c_bus_handle);
+#endif
+    esp_event_loop_create_default(); // Required only if used input GPIO interrupts.
+#ifdef CONFIG_IDF_TARGET_ESP8266
+    esp_event_handler_register(ZH_PCF8574, ESP_EVENT_ANY_ID, &zh_pcf8574_event_handler, NULL); // Required only if used input GPIO interrupts.
+#else
+    esp_event_handler_instance_register(ZH_PCF8574, ESP_EVENT_ANY_ID, &zh_pcf8574_event_handler, NULL, NULL); // Required only if used input GPIO interrupts.
+#endif
+    zh_pcf8574_init_config_t pcf8574_init_config = ZH_PCF8574_INIT_CONFIG_DEFAULT();
+#ifdef CONFIG_IDF_TARGET_ESP8266
+    pcf8574_init_config.i2c_port = I2C_PORT;
+#else
+    pcf8574_init_config.i2c_handle = i2c_bus_handle;
+#endif
+    pcf8574_init_config.i2c_address = 0x38;
+    pcf8574_init_config.p0_gpio_work_mode = true;     // Required only for input GPIO.
+    pcf8574_init_config.interrupt_gpio = GPIO_NUM_14; // Required only if used input GPIO interrupts.
+    zh_pcf8574_init(&pcf8574_init_config, &pcf8574_handle);
+    uint8_t reg = 0;
+    zh_pcf8574_read(&pcf8574_handle, &reg);
+    print_gpio_status("GPIO status: ", reg);
+    printf("Set P7 to 1, P1 to 1 and P0 to 0.\n");
+    zh_pcf8574_write(&pcf8574_handle, 0b10000010); // GPIO P0 will not be changed because it is operating in input mode.
+    zh_pcf8574_read(&pcf8574_handle, &reg);
+    print_gpio_status("GPIO status: ", reg);
+    printf("Sets P0 to 0.\n");
+    zh_pcf8574_write_gpio(&pcf8574_handle, 0, false); // GPIO P0 will not be changed because it is operating in input mode.
+    bool gpio = 0;
+    zh_pcf8574_read_gpio(&pcf8574_handle, 0, &gpio);
+    printf("P0 status: %d.\n", gpio);
+    printf("Set P1 to 0.\n");
+    zh_pcf8574_write_gpio(&pcf8574_handle, 1, false);
+    zh_pcf8574_read_gpio(&pcf8574_handle, 1, &gpio);
+    printf("P1 status: %d.\n", gpio);
+    zh_pcf8574_read(&pcf8574_handle, &reg);
+    print_gpio_status("GPIO status: ", reg);
+    printf("Reset all GPIO.\n");
+    zh_pcf8574_reset(&pcf8574_handle);
+    zh_pcf8574_read(&pcf8574_handle, &reg);
+    print_gpio_status("GPIO status: ", reg);
+}
+
+void zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data) // Required only if used input GPIO interrupts.
+{
+    zh_pcf8574_event_on_isr_t *event = event_data;
+    printf("Interrupt happened on device address 0x%02X on GPIO number %d at level %d.\n", event->i2c_address, event->gpio_number, event->gpio_level);
+}

sdkconfig

@@ -254,7 +254,7 @@ CONFIG_IDF_TOOLCHAIN_GCC=y
 CONFIG_IDF_TARGET_ARCH_XTENSA=y
 CONFIG_IDF_TARGET_ARCH="xtensa"
 CONFIG_IDF_TARGET="esp32"
-CONFIG_IDF_INIT_VERSION="5.5.1"
+CONFIG_IDF_INIT_VERSION="$IDF_INIT_VERSION"
 CONFIG_IDF_TARGET_ESP32=y
 CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
 
@@ -286,8 +286,7 @@ CONFIG_BOOTLOADER_PROJECT_VER=1
 #
 # Application Rollback
 #
-CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
-# CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK is not set
 # end of Application Rollback
 
 #
@@ -296,9 +295,9 @@ CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
 # end of Recovery Bootloader and Rollback
 
 CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE is not set
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF=y
+# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
 
 #
@@ -307,12 +306,12 @@ CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF=y
 CONFIG_BOOTLOADER_LOG_VERSION_1=y
 CONFIG_BOOTLOADER_LOG_VERSION=1
 # CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
+# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
+CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
 # CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=1
+CONFIG_BOOTLOADER_LOG_LEVEL=3
 
 #
 # Format
@@ -402,13 +401,13 @@ CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
 CONFIG_ESPTOOLPY_FLASHFREQ="40m"
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
-CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
+# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
 # CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
 CONFIG_ESPTOOLPY_BEFORE_RESET=y
 # CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
@@ -433,21 +432,12 @@ CONFIG_PARTITION_TABLE_OFFSET=0x8000
 CONFIG_PARTITION_TABLE_MD5=y
 # end of Partition Table
 
-#
-# OTA websocket update
-#
-CONFIG_OTA_DEFAULT_URI="/ota"
-CONFIG_OTA_DEFAULT_WS_URI="/ota/ws"
-CONFIG_OTA_CHUNK_SIZE=8192
-# CONFIG_OTA_PRE_ENCRYPTED_MODE is not set
-# end of OTA websocket update
-
 #
 # Compiler options
 #
-# CONFIG_COMPILER_OPTIMIZATION_DEBUG is not set
+CONFIG_COMPILER_OPTIMIZATION_DEBUG=y
 # CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
-CONFIG_COMPILER_OPTIMIZATION_PERF=y
+# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
 # CONFIG_COMPILER_OPTIMIZATION_NONE is not set
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
@@ -853,7 +843,7 @@ CONFIG_HTTPD_MAX_URI_LEN=512
 CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
 CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_HTTPD_LOG_PURGE_DATA is not set
-CONFIG_HTTPD_WS_SUPPORT=y
+# CONFIG_HTTPD_WS_SUPPORT is not set
 # CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set
 CONFIG_HTTPD_SERVER_EVENT_POST_TIMEOUT=2000
 # end of HTTP Server
@@ -1331,6 +1321,7 @@ CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1
 #
 # Port
 #
+CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
 # CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
 CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y
 # CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK is not set
@@ -1398,18 +1389,16 @@ CONFIG_LOG_VERSION=1
 # Log Level
 #
 # CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
+# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
 # CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
+CONFIG_LOG_DEFAULT_LEVEL_INFO=y
 # CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
 # CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-CONFIG_LOG_DEFAULT_LEVEL=1
+CONFIG_LOG_DEFAULT_LEVEL=3
 CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
-# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
-# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
 # CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
-CONFIG_LOG_MAXIMUM_LEVEL=1
+CONFIG_LOG_MAXIMUM_LEVEL=3
 
 #
 # Level Settings
@@ -2031,24 +2020,23 @@ CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
 # CONFIG_ESP32_NO_BLOBS is not set
 # CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
 # CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
-CONFIG_APP_ROLLBACK_ENABLE=y
+# CONFIG_APP_ROLLBACK_ENABLE is not set
-# CONFIG_APP_ANTI_ROLLBACK is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=y
+# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
-# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
+CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
 # CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
 # CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=1
+CONFIG_LOG_BOOTLOADER_LEVEL=3
 # CONFIG_FLASH_ENCRYPTION_ENABLED is not set
 # CONFIG_FLASHMODE_QIO is not set
 # CONFIG_FLASHMODE_QOUT is not set
 CONFIG_FLASHMODE_DIO=y
 # CONFIG_FLASHMODE_DOUT is not set
 CONFIG_MONITOR_BAUD=115200
-# CONFIG_OPTIMIZATION_LEVEL_DEBUG is not set
+CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
+CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
-# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
+CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
 # CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
 # CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
 CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y