ate0004/main/ate0004.c

#include "ate0004.h"

static i2c_master_bus_handle_t _i2c_bus_handle = NULL;
static httpd_handle_t _webserver_handle = NULL;

static zh_pcf8574_handle_t _button_handle = {0};
static zh_pcf8574_handle_t _led_handle = {0};
static zh_pcf8574_handle_t _relay_handle = {0};

static bool _is_ts_enabled = true;
static bool _is_ret_enabled = false;
static bool _is_ext_enabled = false;

static void _zh_wifi_softap_init(void);
static void _zh_webserver_init(void);
static void _zh_gpio_init(void);
static void _zh_pcf8574_init(void);
static void _zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data);

void app_main(void)
{
    nvs_flash_init();
    esp_event_loop_create_default();
    _zh_wifi_softap_init();
    _zh_webserver_init();
    _zh_gpio_init();
    gpio_set_level(TRIAC_GPIO, LOW);
    _zh_pcf8574_init();
    zh_pcf8574_write_gpio(&_led_handle, TS_LED_GREEN, LED_ON);
    zh_pcf8574_write_gpio(&_led_handle, RET_LED_BLUE, LED_ON);
    zh_pcf8574_write_gpio(&_led_handle, EXT_LED_BLUE, LED_ON);
}

static void _zh_wifi_softap_init(void)
{
    esp_netif_init();
    esp_netif_create_default_wifi_ap();
    wifi_init_config_t wifi_config = WIFI_INIT_CONFIG_DEFAULT();
    esp_wifi_init(&wifi_config);
    wifi_config_t ap_config = {
        .ap = {
            .ssid = WIFI_SSID,
            .password = WIFI_PASS,
            .max_connection = 4,
            .authmode = WIFI_AUTH_WPA2_PSK,
        },
    };
    esp_wifi_set_mode(WIFI_MODE_AP);
    esp_wifi_set_config(WIFI_IF_AP, &ap_config);
    esp_wifi_start();
}

static void _zh_webserver_init(void)
{
    httpd_config_t config = HTTPD_DEFAULT_CONFIG();
    httpd_start(&_webserver_handle, &config);
    zh_ota_server_init(_webserver_handle);
}

static void _zh_gpio_init(void)
{
    gpio_config_t triac_pin_config = {
        .intr_type = GPIO_INTR_DISABLE,
        .mode = GPIO_MODE_OUTPUT,
        .pin_bit_mask = (1ULL << TRIAC_GPIO),
        .pull_down_en = GPIO_PULLDOWN_DISABLE,
        .pull_up_en = GPIO_PULLUP_DISABLE,
    };
    gpio_config(&triac_pin_config);
}

static void _zh_pcf8574_init(void)
{
    i2c_master_bus_config_t i2c_bus_config = {
        .clk_source = I2C_CLK_SRC_DEFAULT,
        .scl_io_num = GPIO_NUM_22,
        .sda_io_num = GPIO_NUM_21,
        .glitch_ignore_cnt = 7,
    };
    i2c_new_master_bus(&i2c_bus_config, &_i2c_bus_handle);
    esp_event_handler_instance_register(ZH_PCF8574, ESP_EVENT_ANY_ID, &_zh_pcf8574_event_handler, NULL, NULL);
    zh_pcf8574_init_config_t config = ZH_PCF8574_INIT_CONFIG_DEFAULT();
    config.i2c_handle = _i2c_bus_handle;
    config.i2c_address = LED_I2C_ADDRESS;
    zh_pcf8574_init(&config, &_led_handle);
    config.i2c_address = RELAY_I2C_ADDRESS;
    zh_pcf8574_init(&config, &_relay_handle);
    config.i2c_address = BUTTON_I2C_ADDRESS;
    config.p0_gpio_work_mode = true;
    config.p1_gpio_work_mode = true;
    config.p2_gpio_work_mode = true;
    config.interrupt_gpio = GPIO_NUM_17;
    zh_pcf8574_init(&config, &_button_handle);
}

static void _zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data)
{
    zh_pcf8574_event_on_isr_t *event = event_data;
    switch (event->gpio_number)
    {
    case TS_BUTTON:
        if (event->gpio_level == LOW && _is_ret_enabled == false && _is_ext_enabled == false)
        {
            if (_is_ts_enabled == true)
            {
                zh_pcf8574_write_gpio(&_led_handle, TS_LED_RED, LED_ON);
                zh_pcf8574_write_gpio(&_led_handle, TS_LED_GREEN, LED_OFF);
                zh_pcf8574_write_gpio(&_relay_handle, TS_RELAY, RELAY_ON);
                _is_ts_enabled = false;
            }
            else
            {
                zh_pcf8574_write_gpio(&_led_handle, TS_LED_RED, LED_OFF);
                zh_pcf8574_write_gpio(&_led_handle, TS_LED_GREEN, LED_ON);
                zh_pcf8574_write_gpio(&_relay_handle, TS_RELAY, RELAY_OFF);
                _is_ts_enabled = true;
            }
        }
        break;
    case RET_BUTTON:
        if (_is_ext_enabled == true)
        {
            break;
        }
        if (event->gpio_level == LOW)
        {
            _is_ret_enabled = true;
            zh_pcf8574_write_gpio(&_led_handle, RET_LED_BLUE, LED_OFF);
            zh_pcf8574_write_gpio(&_led_handle, RET_LED_GREEN, LED_ON);
            zh_pcf8574_write_gpio(&_relay_handle, RET_RELAY, RELAY_ON);
            zh_pcf8574_write_gpio(&_relay_handle, GROUND_RELAY, RELAY_ON);
            vTaskDelay(20 / portTICK_PERIOD_MS);
            gpio_set_level(TRIAC_GPIO, HIGH);
        }
        else
        {
            gpio_set_level(TRIAC_GPIO, LOW);
            vTaskDelay(5 / portTICK_PERIOD_MS);
            zh_pcf8574_write_gpio(&_led_handle, RET_LED_BLUE, LED_ON);
            zh_pcf8574_write_gpio(&_led_handle, RET_LED_GREEN, LED_OFF);
            zh_pcf8574_write_gpio(&_relay_handle, RET_RELAY, RELAY_OFF);
            zh_pcf8574_write_gpio(&_relay_handle, GROUND_RELAY, RELAY_OFF);
            _is_ret_enabled = false;
        }
        break;
    case EXT_BUTTON:
        if (_is_ret_enabled == true)
        {
            break;
        }
        if (event->gpio_level == LOW)
        {
            _is_ext_enabled = true;
            zh_pcf8574_write_gpio(&_led_handle, EXT_LED_BLUE, LED_OFF);
            zh_pcf8574_write_gpio(&_led_handle, EXT_LED_GREEN, LED_ON);
            zh_pcf8574_write_gpio(&_relay_handle, EXT_RELAY, RELAY_ON);
            zh_pcf8574_write_gpio(&_relay_handle, GROUND_RELAY, RELAY_ON);
            vTaskDelay(20 / portTICK_PERIOD_MS);
            gpio_set_level(TRIAC_GPIO, HIGH);
        }
        else
        {
            gpio_set_level(TRIAC_GPIO, LOW);
            vTaskDelay(5 / portTICK_PERIOD_MS);
            zh_pcf8574_write_gpio(&_led_handle, EXT_LED_BLUE, LED_ON);
            zh_pcf8574_write_gpio(&_led_handle, EXT_LED_GREEN, LED_OFF);
            zh_pcf8574_write_gpio(&_relay_handle, EXT_RELAY, RELAY_OFF);
            zh_pcf8574_write_gpio(&_relay_handle, GROUND_RELAY, RELAY_OFF);
            _is_ext_enabled = false;
        }
        break;
    default:
        break;
    }
}