Compare commits

..

No commits in common. "main" and "v1.2" have entirely different histories.
main ... v1.2

6 changed files with 285 additions and 590 deletions

View File

@ -1,65 +1,46 @@
# ESP-NOW gateway for ESP8266/ESP32
Gateway for data exchange between ESP-NOW devices and MQTT broker via WiFi/LAN.
Gateway for data exchange between ESP-NOW devices and MQTT broker via WiFi.
## Features
1. Creates an access point named "ESP-NOW gateway XXXXXXXXXXXX" with password "12345678" (IP 192.168.4.1).
2. Possibility a device search through the Windows Network Environment via SSDP (at ESP_NOW_WIFI mode).
3. Periodically transmission of system information to the MQTT broker (every 60 seconds), availability status to the ESP-NOW network and to the MQTT broker (every 10 seconds) and current date and time to the ESP-NOW network (every 10 seconds).
1. Creates an access point named "ESP-NOW Gateway XXXXXXXXXXXX" with password "12345678" (IP 192.168.4.1).
2. Possibility a device search through the Windows Network Environment via SSDP.
3. Periodically transmission of system information to the MQTT broker (every 60 seconds) and availability status to the ESP-NOW network and to the MQTT broker (every 10 seconds).
4. Automatically adds gateway configuration to Home Assistan via MQTT discovery as a binary_sensor.
5. Automatically adds supported ESP-NOW devices configurations to Home Assistan via MQTT discovery.
6. Automatically adds supported nRF24 devices configurations to Home Assistan via MQTT discovery.
7. Possibility firmware update over OTA (at ESP_NOW_LAN mode via access point only).
8. Web interface for settings (at ESP_NOW_LAN mode via access point only).
9. 3 operating modes:
```text
ESP_NOW ESP-NOW node only. Default mode after flashing.
ESP_NOW_WIFI Gateway between ESP-NOW devices and MQTT broker via WiFi.
ESP_NOW_LAN Gateway between ESP-NOW devices and MQTT broker via Ethernet. Preferred mode.
```
6. Possibility firmware update over OTA.
7. Web interface for settings.
## Notes
1. ESP-NOW mesh network based on the library [ZHNetwork](https://github.com/aZholtikov/ZHNetwork).
2. Regardless of the status of connections to WiFi or MQTT the device perform ESP-NOW node function.
3. For restart the device (without using the Web interface and only if MQTT connection established) send an "restart" command to the device's root topic (example - "homeassistant/espnow_gateway/70039F44BEF7").
4. W5500 connection:
```text
ESP8266 (GPIO05 - CS, GPIO14 - SCK, GPIO12 - MISO, GPIO13 - MOSI).
ESP32 (GPIO05 - CS, GPIO18 - SCK, GPIO19 - MISO, GPIO23 - MOSI).
```
## Attention
1. ESP-NOW network name must be set same of all another ESP-NOW devices in network.
2. If encryption is used, the key must be set same of all another ESP-NOW devices in network.
3. Upload the "data" folder (with web interface) into the filesystem before flashing.
4. At ESP_NOW_WIFI mode WiFi router must be set on channel 1.
2. Upload the "data" folder (with web interface) into the filesystem before flashing.
3. WiFi router must be set on channel 1.
## Tested on
1. NodeMCU 1.0 (ESP-12E Module). ESP_NOW_WIFI mode. Unstable work.
2. AZ-Delivery ESP-32 Dev Kit C V4. ESP_NOW_WIFI mode. Stable work.
3. NodeMCU 1.0 (ESP-12E Module) + W5500. ESP_NOW_LAN mode. Stable work.
4. AZ-Delivery ESP-32 Dev Kit C V4 + W5500. ESP_NOW_LAN mode. Stable work.
1. NodeMCU 1.0 (ESP-12E Module). ESP-NOW + WiFi mode. Unstable work.
2. AZ-Delivery ESP-32 Dev Kit C V4. ESP-NOW + WiFi mode. Stable work.
## Supported devices
1. [RF Gateway](https://github.com/aZholtikov/RF-Gateway)
1. [RF Gateway](https://github.com/aZholtikov/RF-Gateway) (coming soon)
2. [ESP-NOW Switch](https://github.com/aZholtikov/ESP-NOW-Switch)
3. [ESP-NOW Light/Led Strip](https://github.com/aZholtikov/ESP-NOW-Light-Led-Strip)
4. [ESP-NOW Window/Door Sensor](https://github.com/aZholtikov/ESP-NOW-Window-Door-Sensor)
5. [ESP-NOW Water Leakage Sensor](https://github.com/aZholtikov/ESP-NOW-Water-Leakage-Sensor)
5. [ESP-NOW Water Leakage Sensor](https://github.com/aZholtikov/ESP-NOW-Water-Leakage-Sensor) (coming soon)
## To Do
- [X] Automatically add ESP-NOW devices configurations to Home Assistan via MQTT discovery.
- [X] LAN connection support.
- [X] nRF24 device support (via [RF Gateway](https://github.com/aZholtikov/RF-Gateway)).
- [ ] BLE device support (via BLE Gateway).
- [ ] LoRa device support (via LoRa Gateway).
Any feedback via [e-mail](mailto:github@zh.com.ru) would be appreciated. Or... [Buy me a coffee](https://paypal.me/aZholtikov).
- [ ] LAN connection support.
- [ ] nRF24 device support (in current time uses "RF Gateway").
- [ ] BLE device support (for ESP32).
- [ ] LoRa device support.

View File

@ -10,7 +10,7 @@ function createXmlHttpObject() {
function load() {
if (xmlHttp.readyState == 0 || xmlHttp.readyState == 4) {
xmlHttp.open('GET', '/config', true);
xmlHttp.open('PUT', '/config.json', true);
xmlHttp.send(null);
xmlHttp.onload = function () {
jsonResponse = JSON.parse(xmlHttp.responseText);
@ -29,7 +29,6 @@ function loadBlock() {
}
document.getElementsByTagName('body')[0].innerHTML = newString;
setFirmvareValue('version', 'firmware');
setGpioValue('workModeSelect', 'workMode');
handleServerResponse();
}
@ -38,12 +37,6 @@ function getValue(id) {
return value;
}
function getSelectValue(id) {
var select = document.getElementById(id);
var value = select.value;
return value;
}
function sendRequest(submit, server) {
request = new XMLHttpRequest();
request.open("GET", server, true);
@ -52,14 +45,11 @@ function sendRequest(submit, server) {
function saveSetting(submit) {
server = "/setting?ssid=" + getValue('ssid') + "&password=" + encodeURIComponent(getValue('password'))
+ "&mqttHostName=" + getValue('mqttHostName') + "&mqttHostPort=" + getValue('mqttHostPort')
+ "&mqttUserLogin=" + getValue('mqttUserLogin') + "&mqttUserPassword=" + encodeURIComponent(getValue('mqttUserPassword'))
+ "&topicPrefix=" + getValue('topicPrefix')
+ "&deviceName=" + getValue('deviceName')
+ "&espnowNetName=" + getValue('espnowNetName')
+ "&workMode=" + getSelectValue('workModeSelect')
+ "&ntpHostName=" + getValue('ntpHostName')
+ "&gmtOffset=" + getValue('gmtOffset');
+ "&host=" + getValue('mqttHostName') + "&port=" + getValue('mqttHostPort')
+ "&login=" + getValue('mqttUserLogin') + "&pass=" + encodeURIComponent(getValue('mqttUserPassword'))
+ "&prefix=" + getValue('topicPrefix')
+ "&name=" + getValue('deviceName')
+ "&net=" + getValue('espnowNetName');
sendRequest(submit, server);
alert("Please restart device for changes apply.");
}
@ -72,8 +62,3 @@ function restart(submit) {
function setFirmvareValue(id, value) {
document.getElementById(id).innerHTML = document.getElementById(value).value;
}
function setGpioValue(id, value) {
var select = document.getElementById(id);
select.value = document.getElementById(value).value;
}

View File

@ -10,7 +10,7 @@
<body onload="load();">
<form class="box">
<h1>ESP-NOW Gateway</h1>
<h1>ESP-NOW Gateway </h1>
<div class="wrapper">
<p class="text">Firmware:</p>
<p class="text" id="version"></p>
@ -29,39 +29,22 @@
title="ESP-NOW network name (1 to 20 characters)" />
</div>
<div class="wrapper">
<p class="text-select">Work mode:</p>
<input id="workMode" value="{{workMode}}" hidden />
<p><select id="workModeSelect">
<option value="0">ESP-NOW</option>
<option value="1">ESP-NOW WIFI</option>
<option value="2">ESP-NOW LAN</option>
</select></p>
</div>
<p class="text">WiFi settings</p>
<div class="wrapper">
<input class="text-inp" id="ssid" value="{{ssid}}" placeholder="SSID" label title="WiFi network name" />
<input id="ssid" value="{{ssid}}" placeholder="SSID" label title="WiFi network name" />
<input id="password" value="{{password}}" onfocus="this.type='text'" type="password" placeholder="Password"
autocomplete="off" label title="WiFi password" />
</div>
<p class="text">NTP settings</p>
<div class="wrapper">
<input class="text-inp" id="ntpHostName" value="{{ntpHostName}}" placeholder="URL or IP" label
title="NTP server URL or IP" />
<input id="gmtOffset" value="{{gmtOffset}}" placeholder="Time zone" label title="Time zone" />
</div>
<p class="text">MQTT settings</p>
<div class="wrapper">
<input class="text-inp" id="mqttHostName" value="{{mqttHostName}}" placeholder="URL or IP" label
<input id="mqttHostName" value="{{mqttHostName}}" placeholder="URL or IP" label
title="MQTT server URL or IP" />
<input id="mqttHostPort" value="{{mqttHostPort}}" placeholder="Port" label title="MQTT server port" />
</div>
<div class="wrapper">
<input class="text-inp" id="mqttUserLogin" value="{{mqttUserLogin}}" placeholder="Login" label
<input id="mqttUserLogin" value="{{mqttUserLogin}}" placeholder="Login" label
title="MQTT server user login" />
<input id="mqttUserPassword" value="{{mqttUserPassword}}" onfocus="this.type='text'" type="password"
placeholder="Password" autocomplete="off" label title="MQTT server user password" />

View File

@ -1,7 +1,3 @@
p{
margin: 0 0;
}
body {
font-family: "Gill Sans", sans-serif;
background: rgb(255, 255, 255);
@ -25,28 +21,6 @@ h1 {
font-weight: 600;
flex-shrink: 0;
margin-right: 10px;
margin-left: 10px;
margin: 10px 0;
}
.text-select {
width: 35%;
font-weight: 600;
flex-shrink: 0;
margin-right: 10px;
}
.text-inp {
width: 48%;
min-height: 30px;
border-radius: 5px;
border: none;
margin-bottom: 10px;
padding: 0 10px;
color: rgb(0, 0, 0);
background: #a3e0f1;
transition: .5s;
margin-left: 0;
}
.wrapper {
@ -65,19 +39,6 @@ input {
color: rgb(0, 0, 0);
background: #a3e0f1;
transition: .5s;
margin-left: 10px;
}
select {
width: 140px;
min-height: 30px;
border-radius: 5px;
border: none;
margin-bottom: 10px;
padding: 0 10px;
color: rgb(0, 0, 0);
background: #a3e0f1;
transition: .5s;
}
input:hover {
@ -85,18 +46,11 @@ input:hover {
cursor: pointer;
}
select:hover {
background: white;
cursor: pointer;
}
.btn {
width: 48%;
background: rgb(65, 125, 238);
color: white;
transition: .5s;
margin-left: 0;
margin-top: 8px;
}
.btn:hover {
@ -111,10 +65,6 @@ select:hover {
width: 100%;
}
#espnowNetName {
margin-bottom: 15px;
}
.wrapper.wrapper--end {
align-items: baseline;
}

View File

@ -1,63 +1,49 @@
[env:ESP8266]
[env:esp8266]
platform = espressif8266
board = esp12e
board = nodemcuv2
framework = arduino
build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
board_build.filesystem = littlefs
lib_deps =
https://github.com/aZholtikov/ZHNetwork
https://github.com/aZholtikov/ZHConfig
https://github.com/aZholtikov/Async-Web-Server
https://github.com/bblanchon/ArduinoJson
https://github.com/arduino-libraries/Ethernet
https://github.com/knolleary/pubsubclient
https://github.com/arduino-libraries/NTPClient
bblanchon/ArduinoJson@^6.19.4
me-no-dev/ESP Async WebServer@^1.2.3
marvinroger/AsyncMqttClient@^0.9.0
[env:ESP8266-OTA]
[env:esp8266-ota]
platform = espressif8266
board = esp12e
board = nodemcuv2
framework = arduino
build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
board_build.filesystem = littlefs
upload_port = 192.168.4.1
upload_port = 192.168.1.113
upload_protocol = espota
lib_deps =
https://github.com/aZholtikov/ZHNetwork
https://github.com/aZholtikov/ZHConfig
https://github.com/aZholtikov/Async-Web-Server
https://github.com/bblanchon/ArduinoJson
https://github.com/arduino-libraries/Ethernet
https://github.com/knolleary/pubsubclient
https://github.com/arduino-libraries/NTPClient
bblanchon/ArduinoJson@^6.19.4
me-no-dev/ESP Async WebServer@^1.2.3
marvinroger/AsyncMqttClient@^0.9.0
[env:ESP32]
[env:esp32]
platform = espressif32
board = esp32dev
board = az-delivery-devkit-v4
framework = arduino
board_build.filesystem = littlefs
lib_deps =
https://github.com/aZholtikov/ZHNetwork
https://github.com/aZholtikov/ZHConfig
https://github.com/aZholtikov/Async-Web-Server
https://github.com/bblanchon/ArduinoJson
https://github.com/arduino-libraries/Ethernet
https://github.com/knolleary/pubsubclient
https://github.com/arduino-libraries/NTPClient
https://github.com/luc-github/ESP32SSDP
bblanchon/ArduinoJson@^6.19.4
me-no-dev/ESP Async WebServer@^1.2.3
marvinroger/AsyncMqttClient@^0.9.0
luc-github/ESP32SSDP@^1.2.0
[env:ESP32-OTA]
[env:esp32-ota]
platform = espressif32
board = esp32dev
board = az-delivery-devkit-v4
framework = arduino
board_build.filesystem = littlefs
upload_port = 192.168.4.1
upload_port = 192.168.1.143
upload_protocol = espota
lib_deps =
https://github.com/aZholtikov/ZHNetwork
https://github.com/aZholtikov/ZHConfig
https://github.com/aZholtikov/Async-Web-Server
https://github.com/bblanchon/ArduinoJson
https://github.com/arduino-libraries/Ethernet
https://github.com/knolleary/pubsubclient
https://github.com/arduino-libraries/NTPClient
https://github.com/luc-github/ESP32SSDP
bblanchon/ArduinoJson@^6.19.4
me-no-dev/ESP Async WebServer@^1.2.3
marvinroger/AsyncMqttClient@^0.9.0
luc-github/ESP32SSDP@^1.2.0

View File

@ -1,28 +1,28 @@
#include "ArduinoJson.h"
#include "ArduinoOTA.h"
#include "ESPAsyncWebServer.h" // https://github.com/aZholtikov/Async-Web-Server
#include "Ethernet.h" // https://github.com/arduino-libraries/Ethernet
#include "PubSubClient.h"
#include "LittleFS.h"
#include "EEPROM.h"
#include "ESPAsyncWebServer.h"
#include "AsyncMQTTClient.h"
#include "Ticker.h"
#include "NTPClient.h"
#include "ZHNetwork.h"
#include "ZHConfig.h"
#if defined(ESP8266)
#include "ESP8266SSDP.h"
#endif
#if defined(ESP32)
#include "SPIFFS.h"
#include "ESP32SSDP.h"
#endif
void onWifiEvent(WiFiEvent_t event);
void onEspnowMessage(const char *data, const uint8_t *sender);
void onMqttMessage(char *topic, byte *payload, unsigned int length);
void onMqttConnect(bool sessionPresent);
void onMqttDisconnect(AsyncMqttClientDisconnectReason reason);
void onMqttMessage(char *topic, char *payload, AsyncMqttClientMessageProperties properties, size_t len, size_t index, size_t total);
void sendKeepAliveMessage(void);
void sendAttributesMessage(void);
void sendConfigMessage(void);
String getValue(String data, char separator, uint8_t index);
@ -32,407 +32,309 @@ void saveConfig(void);
String xmlNode(String tags, String data);
void setupWebServer(void);
void checkMqttAvailability(void);
void connectToMqtt(void);
void mqttPublish(const char *topic, const char *payload, bool retained);
const String firmware{"1.2"};
typedef enum : uint8_t
{
ESP_NOW,
ESP_NOW_WIFI,
ESP_NOW_LAN
} work_mode_t;
String espnowNetName{"DEFAULT"};
struct deviceConfig
{
#if defined(ESP8266)
String deviceName = "ESP-NOW gateway " + String(ESP.getChipId(), HEX);
#endif
#if defined(ESP32)
String deviceName = "ESP-NOW gateway " + String(ESP.getEfuseMac(), HEX);
#endif
String espnowNetName{"DEFAULT"};
uint8_t workMode{ESP_NOW};
String ssid{"SSID"};
String password{"PASSWORD"};
String mqttHostName{"MQTT"};
uint16_t mqttHostPort{1883};
String mqttUserLogin{""};
String mqttUserPassword{""};
String topicPrefix{"homeassistant"};
String ntpHostName{"NTP"};
uint16_t gmtOffset{10800};
} config;
String deviceName{"ESP-NOW gateway"};
const String firmware{"1.6"};
String ssid{"SSID"};
String password{"PASSWORD"};
const char *mqttUserID{"ESP"};
uint8_t w5500Mac[6] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; // Change it if necessary.
String mqttHostName{"MQTT"};
uint16_t mqttHostPort{1883};
String mqttUserLogin{""};
String mqttUserPassword{""};
String topicPrefix{"homeassistant"};
ZHNetwork myNet;
AsyncWebServer webServer(80);
AsyncMqttClient mqttClient;
EthernetClient ethClient;
WiFiClient wifiClient;
PubSubClient mqttEthClient(ethClient);
PubSubClient mqttWifiClient(wifiClient);
WiFiUDP udpWiFiClient;
EthernetUDP udpEthClient;
NTPClient ntpWiFiClient(udpWiFiClient, config.ntpHostName.c_str(), config.gmtOffset);
NTPClient ntpEthClient(udpEthClient, config.ntpHostName.c_str(), config.gmtOffset);
Ticker mqttAvailabilityCheckTimer;
bool mqttAvailabilityCheckTimerSemaphore{true};
bool isMqttAvailable{false};
void mqttAvailabilityCheckTimerCallback(void);
Ticker mqttReconnectTimer;
bool mqttReconnectTimerSemaphore{false};
void mqttReconnectTimerCallback(void);
Ticker keepAliveMessageTimer;
bool keepAliveMessageTimerSemaphore{true};
void keepAliveMessageTimerCallback(void);
Ticker attributesMessageTimer;
bool attributesMessageTimerSemaphore{true};
bool attributesMessageTimerSemaphore{false};
void attributesMessageTimerCallback(void);
void setup()
{
#if defined(ESP8266)
LittleFS.begin();
#endif
#if defined(ESP32)
LittleFS.begin(true);
#endif
SPIFFS.begin();
loadConfig();
if (config.workMode == ESP_NOW_LAN)
{
Ethernet.init(5);
Ethernet.begin(w5500Mac);
}
if (config.workMode == ESP_NOW_WIFI)
{
WiFi.onEvent(onWifiEvent);
#if defined(ESP8266)
WiFi.setSleepMode(WIFI_NONE_SLEEP);
WiFi.setSleepMode(WIFI_NONE_SLEEP);
#endif
#if defined(ESP32)
WiFi.setSleep(WIFI_PS_NONE);
WiFi.setSleep(WIFI_PS_NONE);
#endif
WiFi.persistent(false);
WiFi.setAutoConnect(false);
WiFi.setAutoReconnect(true);
}
myNet.begin(config.espnowNetName.c_str(), true);
WiFi.persistent(false);
WiFi.setAutoConnect(false);
WiFi.setAutoReconnect(true);
if (config.workMode)
myNet.begin(espnowNetName.c_str(), true);
myNet.setOnBroadcastReceivingCallback(onEspnowMessage);
myNet.setOnUnicastReceivingCallback(onEspnowMessage);
WiFi.softAP(("ESP-NOW Gateway " + myNet.getNodeMac()).c_str(), "12345678");
uint8_t scan = WiFi.scanNetworks(false, false, 1);
String name;
int32_t rssi;
uint8_t encryption;
uint8_t *bssid;
int32_t channel;
bool hidden;
for (int8_t i = 0; i < scan; i++)
{
// myNet.setCryptKey("VERY_LONG_CRYPT_KEY"); // If encryption is used, the key must be set same of all another ESP-NOW devices in network.
myNet.setOnBroadcastReceivingCallback(onEspnowMessage);
myNet.setOnUnicastReceivingCallback(onEspnowMessage);
}
#if defined(ESP8266)
WiFi.softAP(("ESP-NOW gateway " + String(ESP.getChipId(), HEX)).c_str(), "12345678");
WiFi.getNetworkInfo(i, name, encryption, rssi, bssid, channel, hidden);
#endif
#if defined(ESP32)
WiFi.softAP(("ESP-NOW gateway " + String(ESP.getEfuseMac(), HEX)).c_str(), "12345678");
WiFi.getNetworkInfo(i, name, encryption, rssi, bssid, channel);
#endif
if (config.workMode == ESP_NOW_WIFI)
{
uint8_t scan = WiFi.scanNetworks(false, false);
String name;
int32_t rssi;
uint8_t encryption;
uint8_t *bssid;
int32_t channel;
bool hidden;
for (int8_t i = 0; i < scan; i++)
{
#if defined(ESP8266)
WiFi.getNetworkInfo(i, name, encryption, rssi, bssid, channel, hidden);
#endif
#if defined(ESP32)
WiFi.getNetworkInfo(i, name, encryption, rssi, bssid, channel);
#endif
if (name == config.ssid)
WiFi.begin(config.ssid.c_str(), config.password.c_str());
}
if (name == ssid)
WiFi.begin(ssid.c_str(), password.c_str());
}
if (config.workMode == ESP_NOW_WIFI)
{
ntpWiFiClient.begin();
mqttWifiClient.setBufferSize(2048);
mqttWifiClient.setServer(config.mqttHostName.c_str(), config.mqttHostPort);
mqttWifiClient.setCallback(onMqttMessage);
}
if (config.workMode == ESP_NOW_LAN)
{
ntpEthClient.begin();
mqttEthClient.setBufferSize(2048);
mqttEthClient.setServer(config.mqttHostName.c_str(), config.mqttHostPort);
mqttEthClient.setCallback(onMqttMessage);
}
mqttClient.onConnect(onMqttConnect);
mqttClient.onDisconnect(onMqttDisconnect);
mqttClient.onMessage(onMqttMessage);
mqttClient.setServer(mqttHostName.c_str(), mqttHostPort);
mqttClient.setCredentials(mqttUserLogin.c_str(), mqttUserPassword.c_str());
setupWebServer();
ArduinoOTA.begin();
keepAliveMessageTimer.attach(10, keepAliveMessageTimerCallback);
mqttAvailabilityCheckTimer.attach(5, mqttAvailabilityCheckTimerCallback);
attributesMessageTimer.attach(60, attributesMessageTimerCallback);
}
void loop()
{
if (mqttAvailabilityCheckTimerSemaphore)
checkMqttAvailability();
if (mqttReconnectTimerSemaphore)
connectToMqtt();
if (keepAliveMessageTimerSemaphore)
sendKeepAliveMessage();
if (attributesMessageTimerSemaphore)
sendAttributesMessage();
if (config.workMode == ESP_NOW_WIFI)
mqttWifiClient.loop();
if (config.workMode == ESP_NOW_LAN)
mqttEthClient.loop();
myNet.maintenance();
ArduinoOTA.handle();
}
void onWifiEvent(WiFiEvent_t event)
{
#if defined(ESP8266)
if (event == WIFI_EVENT_STAMODE_GOT_IP)
#endif
#if defined(ESP32)
if (event == ARDUINO_EVENT_WIFI_STA_GOT_IP)
#endif
mqttClient.connect();
}
void onEspnowMessage(const char *data, const uint8_t *sender)
{
if (!isMqttAvailable)
if (!mqttClient.connected())
return;
esp_now_payload_data_t incomingData;
memcpy(&incomingData, data, sizeof(esp_now_payload_data_t));
if (incomingData.payloadsType == ENPT_ATTRIBUTES)
mqttPublish((config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/" + getValueName(incomingData.payloadsType)).c_str(), incomingData.message, true);
mqttClient.publish((topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/" + getValueName(incomingData.payloadsType)).c_str(), 2, true, incomingData.message);
if (incomingData.payloadsType == ENPT_KEEP_ALIVE)
mqttPublish((config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/" + getValueName(incomingData.payloadsType)).c_str(), "online", true);
mqttClient.publish((topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/" + getValueName(incomingData.payloadsType)).c_str(), 2, true, "online");
if (incomingData.payloadsType == ENPT_STATE)
mqttPublish((config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/" + getValueName(incomingData.payloadsType)).c_str(), incomingData.message, true);
mqttClient.publish((topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/" + getValueName(incomingData.payloadsType)).c_str(), 2, true, incomingData.message);
if (incomingData.payloadsType == ENPT_CONFIG)
{
if (incomingData.deviceType == ENDT_SWITCH)
{
esp_now_payload_data_t configData;
memcpy(&configData.message, &incomingData.message, sizeof(esp_now_payload_data_t::message));
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
deserializeJson(json, configData.message);
uint8_t unit = json[MCMT_DEVICE_UNIT].as<uint8_t>();
DynamicJsonDocument jsonConfig(2048); // Same as PubSubClient buffer size.
uint8_t unit = json["unit"].as<uint8_t>();
ha_component_type_t type = json["type"].as<ha_component_type_t>();
StaticJsonDocument<2048> jsonConfig;
jsonConfig["platform"] = "mqtt";
jsonConfig["name"] = json[MCMT_DEVICE_NAME];
jsonConfig["name"] = json["name"];
jsonConfig["unique_id"] = myNet.macToString(sender) + "-" + unit;
jsonConfig["device_class"] = getValueName(json[MCMT_DEVICE_CLASS].as<ha_switch_device_class_t>());
jsonConfig["state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["value_template"] = "{{ value_json." + json[MCMT_VALUE_TEMPLATE].as<String>() + " }}";
jsonConfig["command_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/set";
jsonConfig["json_attributes_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["availability_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/status";
if (json[MCMT_PAYLOAD_ON])
jsonConfig["payload_on"] = json[MCMT_PAYLOAD_ON];
if (json[MCMT_PAYLOAD_OFF])
jsonConfig["payload_off"] = json[MCMT_PAYLOAD_OFF];
jsonConfig["device_class"] = getValueName(json["class"].as<ha_switch_device_class_t>());
jsonConfig["state_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["value_template"] = "{{ value_json.state }}";
jsonConfig["command_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/set";
jsonConfig["json_attributes_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["availability_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/status";
jsonConfig["payload_on"] = json["reverse"] == "true" ? "OFF" : "ON";
jsonConfig["payload_off"] = json["reverse"] == "true" ? "ON" : "OFF";
jsonConfig["optimistic"] = "false";
jsonConfig["qos"] = 2;
jsonConfig["retain"] = "true";
char buffer[2048]{0};
serializeJsonPretty(jsonConfig, buffer);
mqttPublish((config.topicPrefix + "/" + getValueName(json[MCMT_COMPONENT_TYPE].as<ha_component_type_t>()) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), buffer, true);
mqttClient.publish((topicPrefix + "/" + getValueName(type) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), 2, true, buffer);
}
if (incomingData.deviceType == ENDT_LED)
{
esp_now_payload_data_t configData;
memcpy(&configData.message, &incomingData.message, sizeof(esp_now_payload_data_t::message));
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
deserializeJson(json, configData.message);
uint8_t unit = json[MCMT_DEVICE_UNIT].as<uint8_t>();
esp_now_led_type_t ledClass = json[MCMT_DEVICE_CLASS];
DynamicJsonDocument jsonConfig(2048); // Same as PubSubClient buffer size.
uint8_t unit = json["unit"].as<uint8_t>();
ha_component_type_t type = json["type"].as<ha_component_type_t>();
esp_now_led_type_t ledClass = json["class"];
StaticJsonDocument<2048> jsonConfig;
jsonConfig["platform"] = "mqtt";
jsonConfig["name"] = json[MCMT_DEVICE_NAME];
jsonConfig["name"] = json["name"];
jsonConfig["unique_id"] = myNet.macToString(sender) + "-" + unit;
jsonConfig["state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["state_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["state_value_template"] = "{{ value_json.state }}";
jsonConfig["command_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/set";
jsonConfig["brightness_state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["command_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/set";
jsonConfig["brightness_state_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["brightness_value_template"] = "{{ value_json.brightness }}";
jsonConfig["brightness_command_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/brightness";
jsonConfig["brightness_command_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/brightness";
if (ledClass == ENLT_RGB || ledClass == ENLT_RGBW || ledClass == ENLT_RGBWW)
{
jsonConfig["rgb_state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["rgb_state_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["rgb_value_template"] = "{{ value_json.rgb | join(',') }}";
jsonConfig["rgb_command_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/rgb";
jsonConfig["rgb_command_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/rgb";
}
if (ledClass == ENLT_WW || ledClass == ENLT_RGBWW)
{
jsonConfig["color_temp_state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["color_temp_state_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["color_temp_value_template"] = "{{ value_json.temperature }}";
jsonConfig["color_temp_command_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/temperature";
jsonConfig["color_temp_command_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/temperature";
}
jsonConfig["json_attributes_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["availability_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/status";
if (json[MCMT_PAYLOAD_ON])
jsonConfig["payload_on"] = json[MCMT_PAYLOAD_ON];
if (json[MCMT_PAYLOAD_OFF])
jsonConfig["payload_off"] = json[MCMT_PAYLOAD_OFF];
jsonConfig["json_attributes_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["availability_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/status";
jsonConfig["payload_on"] = "ON";
jsonConfig["payload_off"] = "OFF";
jsonConfig["optimistic"] = "false";
jsonConfig["qos"] = 2;
jsonConfig["retain"] = "true";
char buffer[2048]{0};
serializeJsonPretty(jsonConfig, buffer);
mqttPublish((config.topicPrefix + "/" + getValueName(json[MCMT_COMPONENT_TYPE].as<ha_component_type_t>()) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), buffer, true);
mqttClient.publish((topicPrefix + "/" + getValueName(type) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), 2, true, buffer);
}
if (incomingData.deviceType == ENDT_SENSOR)
{
esp_now_payload_data_t configData;
memcpy(&configData.message, &incomingData.message, sizeof(esp_now_payload_data_t::message));
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
deserializeJson(json, configData.message);
uint8_t unit = json[MCMT_DEVICE_UNIT].as<uint8_t>();
ha_component_type_t type = json[MCMT_COMPONENT_TYPE].as<ha_component_type_t>();
DynamicJsonDocument jsonConfig(2048); // Same as PubSubClient buffer size.
uint8_t unit = json["unit"].as<uint8_t>();
ha_component_type_t type = json["type"].as<ha_component_type_t>();
StaticJsonDocument<2048> jsonConfig;
jsonConfig["platform"] = "mqtt";
jsonConfig["name"] = json[MCMT_DEVICE_NAME];
jsonConfig["name"] = json["name"];
jsonConfig["unique_id"] = myNet.macToString(sender) + "-" + unit;
jsonConfig["state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["value_template"] = "{{ value_json." + json[MCMT_VALUE_TEMPLATE].as<String>() + " }}";
jsonConfig["json_attributes_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["state_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/state";
jsonConfig["json_attributes_topic"] = topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["force_update"] = "true";
jsonConfig["qos"] = 2;
jsonConfig["retain"] = "true";
if (type == HACT_SENSOR)
{
jsonConfig["device_class"] = getValueName(json[MCMT_DEVICE_CLASS].as<ha_sensor_device_class_t>());
jsonConfig["unit_of_measurement"] = json[MCMT_UNIT_OF_MEASUREMENT];
}
if (type == HACT_BINARY_SENSOR)
jsonConfig["device_class"] = getValueName(json[MCMT_DEVICE_CLASS].as<ha_binary_sensor_device_class_t>());
if (json[MCMT_EXPIRE_AFTER])
jsonConfig["expire_after"] = json[MCMT_EXPIRE_AFTER];
if (json[MCMT_OFF_DELAY])
jsonConfig["off_delay"] = json[MCMT_OFF_DELAY];
if (json[MCMT_PAYLOAD_ON])
jsonConfig["payload_on"] = json[MCMT_PAYLOAD_ON];
if (json[MCMT_PAYLOAD_OFF])
jsonConfig["payload_off"] = json[MCMT_PAYLOAD_OFF];
char buffer[2048]{0};
serializeJsonPretty(jsonConfig, buffer);
mqttPublish((config.topicPrefix + "/" + getValueName(type) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), buffer, true);
}
if (incomingData.deviceType == ENDT_RF_SENSOR)
{
esp_now_payload_data_t configData;
memcpy(&configData.message, &incomingData.message, sizeof(esp_now_payload_data_t::message));
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
deserializeJson(json, configData.message);
uint8_t unit = json[MCMT_DEVICE_UNIT].as<uint8_t>();
ha_component_type_t haComponentType = json[MCMT_COMPONENT_TYPE].as<ha_component_type_t>();
rf_sensor_type_t rfSensorType = json[MCMT_RF_SENSOR_TYPE].as<rf_sensor_type_t>();
uint16_t rfSensorId = json[MCMT_RF_SENSOR_ID].as<uint16_t>();
String valueTemplate = json[MCMT_VALUE_TEMPLATE].as<String>();
DynamicJsonDocument jsonConfig(2048); // Same as PubSubClient buffer size.
jsonConfig["platform"] = "mqtt";
jsonConfig["name"] = getValueName(rfSensorType) + " " + rfSensorId + " " + valueTemplate;
jsonConfig["unique_id"] = String(rfSensorId) + "-" + unit;
jsonConfig["state_topic"] = config.topicPrefix + "/rf_sensor/" + getValueName(rfSensorType) + "/" + rfSensorId + "/state";
jsonConfig["value_template"] = "{{ value_json." + valueTemplate + " }}";
jsonConfig["force_update"] = "true";
jsonConfig["retain"] = "true";
if (haComponentType == HACT_SENSOR)
{
jsonConfig["device_class"] = getValueName(json[MCMT_DEVICE_CLASS].as<ha_sensor_device_class_t>());
jsonConfig["unit_of_measurement"] = json[MCMT_UNIT_OF_MEASUREMENT];
jsonConfig["device_class"] = getValueName(json["class"].as<ha_binary_sensor_device_class_t>());
jsonConfig["payload_on"] = json["payload_on"];
jsonConfig["payload_off"] = json["payload_off"];
}
if (haComponentType == HACT_BINARY_SENSOR)
jsonConfig["device_class"] = getValueName(json[MCMT_DEVICE_CLASS].as<ha_binary_sensor_device_class_t>());
if (json[MCMT_EXPIRE_AFTER])
jsonConfig["expire_after"] = json[MCMT_EXPIRE_AFTER];
if (json[MCMT_OFF_DELAY])
jsonConfig["off_delay"] = json[MCMT_OFF_DELAY];
if (json[MCMT_PAYLOAD_ON])
jsonConfig["payload_on"] = json[MCMT_PAYLOAD_ON];
if (json[MCMT_PAYLOAD_OFF])
jsonConfig["payload_off"] = json[MCMT_PAYLOAD_OFF];
char buffer[2048]{0};
serializeJsonPretty(jsonConfig, buffer);
mqttPublish((config.topicPrefix + "/" + getValueName(haComponentType) + "/" + rfSensorId + "-" + unit + "/config").c_str(), buffer, true);
}
if (incomingData.deviceType == ENDT_RF_GATEWAY)
{
esp_now_payload_data_t configData;
memcpy(&configData.message, &incomingData.message, sizeof(esp_now_payload_data_t::message));
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
deserializeJson(json, configData.message);
uint8_t unit = json[MCMT_DEVICE_UNIT].as<uint8_t>();
DynamicJsonDocument jsonConfig(2048); // Same as PubSubClient buffer size.
jsonConfig["platform"] = "mqtt";
jsonConfig["name"] = json[MCMT_DEVICE_NAME];
jsonConfig["unique_id"] = myNet.macToString(sender) + "-" + unit;
jsonConfig["device_class"] = getValueName(json[MCMT_DEVICE_CLASS].as<ha_binary_sensor_device_class_t>());
jsonConfig["state_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/status";
jsonConfig["json_attributes_topic"] = config.topicPrefix + "/" + getValueName(incomingData.deviceType) + "/" + myNet.macToString(sender) + "/attributes";
jsonConfig["payload_on"] = json[MCMT_PAYLOAD_ON];
jsonConfig["expire_after"] = json[MCMT_EXPIRE_AFTER];
jsonConfig["force_update"] = "true";
jsonConfig["retain"] = "true";
char buffer[2048]{0};
serializeJsonPretty(jsonConfig, buffer);
mqttPublish((config.topicPrefix + "/" + getValueName(json[MCMT_COMPONENT_TYPE].as<ha_component_type_t>()) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), buffer, true);
mqttClient.publish((topicPrefix + "/" + getValueName(type) + "/" + myNet.macToString(sender) + "-" + unit + "/config").c_str(), 2, true, buffer);
}
}
if (incomingData.payloadsType == ENPT_FORWARD)
{
esp_now_payload_data_t forwardData;
memcpy(&forwardData.message, &incomingData.message, sizeof(esp_now_payload_data_t::message));
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
deserializeJson(json, forwardData.message);
if (incomingData.deviceType == ENDT_RF_GATEWAY)
mqttPublish((config.topicPrefix + "/rf_sensor/" + getValueName(json["type"].as<rf_sensor_type_t>()) + "/" + json["id"].as<uint16_t>() + "/state").c_str(), incomingData.message, false);
mqttClient.publish((topicPrefix + "/rf_sensor/" + getValueName(json["type"].as<rf_sensor_type_t>()) + "/" + json["id"].as<uint16_t>()).c_str(), 2, false, incomingData.message);
}
}
void onMqttMessage(char *topic, byte *payload, unsigned int length)
void onMqttConnect(bool sessionPresent)
{
mqttClient.subscribe((topicPrefix + "/espnow_gateway/#").c_str(), 2);
mqttClient.subscribe((topicPrefix + "/espnow_switch/#").c_str(), 2);
mqttClient.subscribe((topicPrefix + "/espnow_led/#").c_str(), 2);
StaticJsonDocument<1024> json;
json["platform"] = "mqtt";
json["name"] = deviceName;
json["unique_id"] = myNet.getNodeMac() + "-1";
json["device_class"] = "connectivity";
json["state_topic"] = topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/status";
json["json_attributes_topic"] = topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/attributes";
json["payload_on"] = "online";
json["expire_after"] = 30;
json["force_update"] = "true";
json["qos"] = 2;
json["retain"] = "true";
char buffer[1024]{0};
serializeJsonPretty(json, buffer);
mqttClient.publish((topicPrefix + "/binary_sensor/" + myNet.getNodeMac() + "-1" + "/config").c_str(), 2, true, buffer);
sendKeepAliveMessage();
sendAttributesMessage();
attributesMessageTimer.attach(60, attributesMessageTimerCallback);
}
void onMqttDisconnect(AsyncMqttClientDisconnectReason reason)
{
mqttReconnectTimer.once(5, mqttReconnectTimerCallback);
sendKeepAliveMessage();
attributesMessageTimer.detach();
}
void onMqttMessage(char *topic, char *payload, AsyncMqttClientMessageProperties properties, size_t len, size_t index, size_t total)
{
String mac = getValue(String(topic).substring(0, String(topic).length()), '/', 2);
String message;
bool flag{false};
for (uint16_t i = 0; i < length; ++i)
for (uint16_t i = 0; i < len; ++i)
{
message += (char)payload[i];
}
esp_now_payload_data_t outgoingData;
outgoingData.deviceType = ENDT_GATEWAY;
outgoingData.payloadsType = ENPT_SET;
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
if (message == "update" || message == "restart")
{
mqttClient.publish(topic, 2, true, "");
mqttClient.publish((String(topic) + "/status").c_str(), 2, true, "offline");
if (mac == myNet.getNodeMac() && message == "restart")
ESP.restart();
flag = true;
}
if (String(topic) == config.topicPrefix + "/espnow_switch/" + mac + "/set" || String(topic) == config.topicPrefix + "/espnow_led/" + mac + "/set")
if (String(topic) == topicPrefix + "/espnow_switch/" + mac + "/set" || String(topic) == topicPrefix + "/espnow_led/" + mac + "/set")
{
flag = true;
json["set"] = message;
json["set"] = message == "ON" ? "ON" : "OFF";
}
if (String(topic) == config.topicPrefix + "/espnow_led/" + mac + "/brightness")
if (String(topic) == topicPrefix + "/espnow_led/" + mac + "/brightness")
{
flag = true;
json["brightness"] = message;
}
if (String(topic) == config.topicPrefix + "/espnow_led/" + mac + "/temperature")
if (String(topic) == topicPrefix + "/espnow_led/" + mac + "/temperature")
{
flag = true;
json["temperature"] = message;
}
if (String(topic) == config.topicPrefix + "/espnow_led/" + mac + "/rgb")
if (String(topic) == topicPrefix + "/espnow_led/" + mac + "/rgb")
{
flag = true;
json["rgb"] = message;
@ -441,9 +343,11 @@ void onMqttMessage(char *topic, byte *payload, unsigned int length)
{
if (message == "restart")
outgoingData.payloadsType = ENPT_RESTART;
if (message == "update")
outgoingData.payloadsType = ENPT_UPDATE;
serializeJsonPretty(json, outgoingData.message);
else
outgoingData.payloadsType = message == "update" ? ENPT_UPDATE : ENPT_SET;
char buffer[sizeof(esp_now_payload_data_t::message)]{0};
serializeJsonPretty(json, buffer);
memcpy(&outgoingData.message, &buffer, sizeof(esp_now_payload_data_t::message));
char temp[sizeof(esp_now_payload_data_t)]{0};
memcpy(&temp, &outgoingData, sizeof(esp_now_payload_data_t));
uint8_t target[6];
@ -455,30 +359,14 @@ void onMqttMessage(char *topic, byte *payload, unsigned int length)
void sendKeepAliveMessage()
{
keepAliveMessageTimerSemaphore = false;
if (isMqttAvailable)
mqttPublish((config.topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/status").c_str(), "online", true);
if (mqttClient.connected())
mqttClient.publish((topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/status").c_str(), 2, true, "online");
esp_now_payload_data_t outgoingData;
outgoingData.deviceType = ENDT_GATEWAY;
outgoingData.payloadsType = ENPT_KEEP_ALIVE;
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
json["MQTT"] = isMqttAvailable ? "online" : "offline";
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
json["MQTT"] = mqttClient.connected() ? "online" : "offline";
json["frequency"] = 10; // For compatibility with the previous version. Will be removed in future releases.
if (config.workMode == ESP_NOW_WIFI && WiFi.isConnected())
{
ntpWiFiClient.update();
uint64_t epochTime = ntpWiFiClient.getEpochTime();
struct tm *time = gmtime((time_t *)&epochTime);
json["time"] = ntpWiFiClient.getFormattedTime();
json["date"] = String(time->tm_mday) + "." + String(time->tm_mon + 1) + "." + String(time->tm_year + 1900);
}
if (config.workMode == ESP_NOW_LAN && Ethernet.linkStatus() == LinkON)
{
ntpEthClient.update();
uint64_t epochTime = ntpEthClient.getEpochTime();
struct tm *time = gmtime((time_t *)&epochTime);
json["time"] = ntpEthClient.getFormattedTime();
json["date"] = String(time->tm_mday) + "." + String(time->tm_mon + 1) + "." + String(time->tm_year + 1900);
}
char buffer[sizeof(esp_now_payload_data_t::message)]{0};
serializeJsonPretty(json, buffer);
memcpy(&outgoingData.message, &buffer, sizeof(esp_now_payload_data_t::message));
@ -489,15 +377,13 @@ void sendKeepAliveMessage()
void sendAttributesMessage()
{
if (!isMqttAvailable)
return;
attributesMessageTimerSemaphore = false;
uint32_t secs = millis() / 1000;
uint32_t mins = secs / 60;
uint32_t hours = mins / 60;
uint32_t days = hours / 24;
DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
json["Type"] = "ESP-NOW gateway";
StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
json["Type"] = "ESP-NOW Gateway";
#if defined(ESP8266)
json["MCU"] = "ESP8266";
#endif
@ -507,32 +393,11 @@ void sendAttributesMessage()
json["MAC"] = myNet.getNodeMac();
json["Firmware"] = firmware;
json["Library"] = myNet.getFirmwareVersion();
if (config.workMode == ESP_NOW_WIFI)
json["IP"] = WiFi.localIP().toString();
if (config.workMode == ESP_NOW_LAN)
json["IP"] = Ethernet.localIP().toString();
json["IP"] = WiFi.localIP().toString();
json["Uptime"] = "Days:" + String(days) + " Hours:" + String(hours - (days * 24)) + " Mins:" + String(mins - (hours * 60));
char buffer[sizeof(esp_now_payload_data_t::message)]{0};
serializeJsonPretty(json, buffer);
mqttPublish((config.topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/attributes").c_str(), buffer, true);
}
void sendConfigMessage()
{
DynamicJsonDocument json(2048); // Same as PubSubClient buffer size.
json["platform"] = "mqtt";
json["name"] = config.deviceName;
json["unique_id"] = myNet.getNodeMac() + "-1";
json["device_class"] = "connectivity";
json["state_topic"] = config.topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/status";
json["json_attributes_topic"] = config.topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/attributes";
json["payload_on"] = "online";
json["expire_after"] = 30;
json["force_update"] = "true";
json["retain"] = "true";
char buffer[1024]{0};
serializeJsonPretty(json, buffer);
mqttPublish((config.topicPrefix + "/binary_sensor/" + myNet.getNodeMac() + "-1" + "/config").c_str(), buffer, true);
mqttClient.publish((topicPrefix + "/espnow_gateway/" + myNet.getNodeMac() + "/attributes").c_str(), 2, true, buffer);
}
String getValue(String data, char separator, uint8_t index)
@ -552,27 +417,41 @@ String getValue(String data, char separator, uint8_t index)
void loadConfig()
{
EEPROM.begin(4096);
if (EEPROM.read(4095) == 254)
{
EEPROM.get(0, config);
EEPROM.end();
}
else
{
EEPROM.end();
if (!SPIFFS.exists("/config.json"))
saveConfig();
}
delay(50);
File file = SPIFFS.open("/config.json", "r");
String jsonFile = file.readString();
StaticJsonDocument<1024> json;
deserializeJson(json, jsonFile);
espnowNetName = json["espnowNetName"].as<String>();
deviceName = json["deviceName"].as<String>();
ssid = json["ssid"].as<String>();
password = json["password"].as<String>();
mqttHostName = json["mqttHostName"].as<String>();
mqttHostPort = json["mqttHostPort"];
mqttUserLogin = json["mqttUserLogin"].as<String>();
mqttUserPassword = json["mqttUserPassword"].as<String>();
topicPrefix = json["topicPrefix"].as<String>();
file.close();
}
void saveConfig()
{
EEPROM.begin(4096);
EEPROM.write(4095, 254);
EEPROM.put(0, config);
EEPROM.end();
delay(50);
StaticJsonDocument<1024> json;
json["firmware"] = firmware;
json["espnowNetName"] = espnowNetName;
json["deviceName"] = deviceName;
json["ssid"] = ssid;
json["password"] = password;
json["mqttHostName"] = mqttHostName;
json["mqttHostPort"] = mqttHostPort;
json["mqttUserLogin"] = mqttUserLogin;
json["mqttUserPassword"] = mqttUserPassword;
json["topicPrefix"] = topicPrefix;
json["system"] = "empty";
File file = SPIFFS.open("/config.json", "w");
serializeJsonPretty(json, file);
file.close();
}
String xmlNode(String tags, String data)
@ -594,10 +473,10 @@ void setupWebServer()
ssdpHeader = xmlNode("specVersion", ssdpHeader);
ssdpHeader += xmlNode("URLBase", "http://" + WiFi.localIP().toString());
String ssdpDescription = xmlNode("deviceType", "upnp:rootdevice");
ssdpDescription += xmlNode("friendlyName", config.deviceName);
ssdpDescription += xmlNode("friendlyName", deviceName);
ssdpDescription += xmlNode("presentationURL", "/");
ssdpDescription += xmlNode("serialNumber", "0000000" + String(random(1000)));
ssdpDescription += xmlNode("modelName", "ESP-NOW gateway");
ssdpDescription += xmlNode("modelName", "ESP-NOW Gateway");
ssdpDescription += xmlNode("modelNumber", firmware);
ssdpDescription += xmlNode("modelURL", "https://github.com/aZholtikov/ESP-NOW-Gateway");
ssdpDescription += xmlNode("manufacturer", "Alexey Zholtikov");
@ -610,118 +489,49 @@ void setupWebServer()
request->send(200, "text/xml", ssdpSend); });
webServer.on("/", HTTP_GET, [](AsyncWebServerRequest *request)
{ request->send(LittleFS, "/index.htm"); });
webServer.on("/function.js", HTTP_GET, [](AsyncWebServerRequest *request)
{ request->send(LittleFS, "/function.js"); });
webServer.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request)
{ request->send(LittleFS, "/style.css"); });
{ request->send(SPIFFS, "/index.htm"); });
webServer.on("/setting", HTTP_GET, [](AsyncWebServerRequest *request)
{
config.ssid = request->getParam("ssid")->value();
config.password = request->getParam("password")->value();
config.mqttHostName = request->getParam("mqttHostName")->value();
config.mqttHostPort = request->getParam("mqttHostPort")->value().toInt();
config.mqttUserLogin = request->getParam("mqttUserLogin")->value();
config.mqttUserPassword = request->getParam("mqttUserPassword")->value();
config.topicPrefix = request->getParam("topicPrefix")->value();
config.deviceName = request->getParam("deviceName")->value();
config.espnowNetName = request->getParam("espnowNetName")->value();
config.workMode = request->getParam("workMode")->value().toInt();
config.ntpHostName = request->getParam("ntpHostName")->value();
config.gmtOffset = request->getParam("gmtOffset")->value().toInt();
ssid = request->getParam("ssid")->value();
password = request->getParam("password")->value();
mqttHostName = request->getParam("host")->value();
mqttHostPort = request->getParam("port")->value().toInt();
mqttUserLogin = request->getParam("login")->value();
mqttUserPassword = request->getParam("pass")->value();
topicPrefix = request->getParam("prefix")->value();
deviceName = request->getParam("name")->value();
espnowNetName = request->getParam("net")->value();
request->send(200);
saveConfig(); });
webServer.on("/config", HTTP_GET, [](AsyncWebServerRequest *request)
{
String configJson;
DynamicJsonDocument json(2048); // For overflow protection.
json["firmware"] = firmware;
json["espnowNetName"] = config.espnowNetName;
json["deviceName"] = config.deviceName;
json["ssid"] = config.ssid;
json["password"] = config.password;
json["mqttHostName"] = config.mqttHostName;
json["mqttHostPort"] = config.mqttHostPort;
json["mqttUserLogin"] = config.mqttUserLogin;
json["mqttUserPassword"] = config.mqttUserPassword;
json["topicPrefix"] = config.topicPrefix;
json["workMode"] = config.workMode;
json["ntpHostName"] = config.ntpHostName;
json["gmtOffset"] = config.gmtOffset;
serializeJsonPretty(json, configJson);
request->send(200, "application/json", configJson); });
webServer.on("/restart", HTTP_GET, [](AsyncWebServerRequest *request)
{request->send(200);
{
request->send(200);
ESP.restart(); });
webServer.onNotFound([](AsyncWebServerRequest *request)
{ request->send(404, "text/plain", "File Not Found"); });
if (config.workMode == ESP_NOW_WIFI)
SSDP.begin();
{
if (SPIFFS.exists(request->url()))
request->send(SPIFFS, request->url());
else
{
request->send(404, "text/plain", "File Not Found");
} });
SSDP.begin();
webServer.begin();
}
void checkMqttAvailability()
void connectToMqtt()
{
mqttAvailabilityCheckTimerSemaphore = false;
if (config.workMode == ESP_NOW_WIFI)
if (WiFi.isConnected())
if (!mqttWifiClient.connected())
{
isMqttAvailable = false;
if (mqttWifiClient.connect(mqttUserID, config.mqttUserLogin.c_str(), config.mqttUserPassword.c_str()))
{
isMqttAvailable = true;
mqttWifiClient.subscribe((config.topicPrefix + "/espnow_gateway/#").c_str());
mqttWifiClient.subscribe((config.topicPrefix + "/espnow_switch/#").c_str());
mqttWifiClient.subscribe((config.topicPrefix + "/espnow_led/#").c_str());
sendConfigMessage();
sendAttributesMessage();
sendKeepAliveMessage();
}
}
if (config.workMode == ESP_NOW_LAN)
if (Ethernet.linkStatus() == LinkON)
if (!mqttEthClient.connected())
{
isMqttAvailable = false;
if (mqttEthClient.connect(mqttUserID, config.mqttUserLogin.c_str(), config.mqttUserPassword.c_str()))
{
isMqttAvailable = true;
mqttEthClient.subscribe((config.topicPrefix + "/espnow_gateway/#").c_str());
mqttEthClient.subscribe((config.topicPrefix + "/espnow_switch/#").c_str());
mqttEthClient.subscribe((config.topicPrefix + "/espnow_led/#").c_str());
sendConfigMessage();
sendAttributesMessage();
sendKeepAliveMessage();
}
}
mqttReconnectTimerSemaphore = false;
mqttClient.connect();
}
void mqttPublish(const char *topic, const char *payload, bool retained)
void mqttReconnectTimerCallback()
{
if (config.workMode == ESP_NOW_WIFI)
mqttWifiClient.publish(topic, payload, retained);
if (config.workMode == ESP_NOW_LAN)
mqttEthClient.publish(topic, payload, retained);
}
void mqttAvailabilityCheckTimerCallback()
{
mqttAvailabilityCheckTimerSemaphore = true;
mqttReconnectTimerSemaphore = true;
}
void keepAliveMessageTimerCallback()