Fixed one bug

Minimized of config message size.

README.md

@@ -4,7 +4,7 @@ ESP-NOW based light/led strip controller for ESP8266. Alternate firmware for Tuy
 
 ## Features
 
-1. After turn on (or after rebooting) creates an access point named "ESP-NOW Light XXXXXXXXXXXX" with password "12345678" (IP 192.168.4.1). Access point will be shown during 5 minutes. The rest of the time access point is a hidden.
+1. After turn on (or after rebooting) creates an access point named "ESP-NOW light XXXXXXXXXXXX" with password "12345678" (IP 192.168.4.1). Access point will be shown during 5 minutes. The rest of the time access point is a hidden.
 2. Periodically transmission of system information (every 60 seconds), availability status (every 10 seconds) and state status (every 300 seconds) to the gateway.
 3. Saves the last state when the power is turned off. Goes to the last state when the power is turned on.
 4. Automatically adds light/led strip configuration to Home Assistan via MQTT discovery as a light.
@@ -25,5 +25,8 @@ See [here](https://github.com/aZholtikov/ESP-NOW-Light-Led-Strip/tree/main/hardw
 
 1. A gateway is required. For details see [ESP-NOW Gateway](https://github.com/aZholtikov/ESP-NOW-Gateway).
 2. ESP-NOW network name must be set same of all another ESP-NOW devices in network.
-3. Upload the "data" folder (with web interface) into the filesystem before flashing.
+3. If encryption is used, the key must be set same of all another ESP-NOW devices in network.
-4. For using this firmware on Tuya/SmartLife WiFi light/led strip controllers, the WiFi module must be replaced with an ESP8266 compatible module (if necessary).
+4. Upload the "data" folder (with web interface) into the filesystem before flashing.
+5. For using this firmware on Tuya/SmartLife WiFi light/led strip controllers, the WiFi module must be replaced with an ESP8266 compatible module (if necessary).
+
+Any feedback via [e-mail](mailto:github@zh.com.ru) would be appreciated. Or... [Buy me a coffee](https://paypal.me/aZholtikov).

platformio.ini

@@ -2,20 +2,26 @@
 platform = espressif8266
 board = esp12e
 framework = arduino
+build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
+board_build.filesystem = littlefs
+board_build.ldscript = eagle.flash.4m1m.ld
 lib_deps = 
 	https://github.com/aZholtikov/ZHNetwork
 	https://github.com/aZholtikov/ZHConfig
-	bblanchon/ArduinoJson@^6.19.4
+	https://github.com/aZholtikov/Async-Web-Server
-	me-no-dev/ESP Async WebServer@^1.2.3
+	https://github.com/bblanchon/ArduinoJson
 
 [env:ESP-12E-OTA]
 platform = espressif8266
 board = esp12e
 framework = arduino
+build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
+board_build.filesystem = littlefs
+board_build.ldscript = eagle.flash.4m1m.ld
 upload_port = 192.168.4.1
 upload_protocol = espota
 lib_deps = 
 	https://github.com/aZholtikov/ZHNetwork
 	https://github.com/aZholtikov/ZHConfig
-	bblanchon/ArduinoJson@^6.19.4
+	https://github.com/aZholtikov/Async-Web-Server
-	me-no-dev/ESP Async WebServer@^1.2.3
+	https://github.com/bblanchon/ArduinoJson

src/main.cpp

@@ -1,6 +1,7 @@
 #include "ArduinoJson.h"
 #include "ArduinoOTA.h"
-#include "ESPAsyncWebServer.h"
+#include "ESPAsyncWebServer.h" // https://github.com/aZholtikov/Async-Web-Server
+#include "LittleFS.h"
 #include "Ticker.h"
 #include "ZHNetwork.h"
 #include "ZHConfig.h"
@@ -30,20 +31,20 @@ typedef struct
 
 std::vector<espnow_message_t> espnowMessage;
 
-const String firmware{"1.12"};
+const String firmware{"1.2"};
 
 String espnowNetName{"DEFAULT"};
 
 String deviceName = "ESP-NOW light " + String(ESP.getChipId(), HEX);
 
 uint8_t ledType{ENLT_NONE};
-bool ledStatus{false};
 uint8_t coldWhitePin{0};
 uint8_t warmWhitePin{0};
 uint8_t redPin{0};
 uint8_t greenPin{0};
 uint8_t bluePin{0};
 
+bool ledStatus{false};
 uint8_t brightness{255};
 uint16_t temperature{255};
 uint8_t red{255};
@@ -54,9 +55,6 @@ bool wasMqttAvailable{false};
 
 uint8_t gatewayMAC[6]{0};
 
-const String payloadOn{"ON"};
-const String payloadOff{"OFF"};
-
 ZHNetwork myNet;
 AsyncWebServer webServer(80);
 
@@ -83,7 +81,7 @@ void setup()
 {
   analogWriteRange(255);
 
-  SPIFFS.begin();
+  LittleFS.begin();
 
   loadConfig();
 
@@ -102,6 +100,7 @@ void setup()
 
   WiFi.setSleepMode(WIFI_NONE_SLEEP);
   myNet.begin(espnowNetName.c_str());
+  // myNet.setCryptKey("VERY_LONG_CRYPT_KEY"); // If encryption is used, the key must be set same of all another ESP-NOW devices in network.
 
   myNet.setOnBroadcastReceivingCallback(onBroadcastReceiving);
   myNet.setOnUnicastReceivingCallback(onUnicastReceiving);
@@ -150,7 +149,11 @@ void onBroadcastReceiving(const char *data, const uint8_t *sender)
     {
       wasMqttAvailable = temp;
       if (temp)
+      {
         sendConfigMessage();
+        sendAttributesMessage();
+        sendStatusMessage();
+      }
     }
     gatewayAvailabilityCheckTimer.once(15, gatewayAvailabilityCheckTimerCallback);
   }
@@ -167,7 +170,7 @@ void onUnicastReceiving(const char *data, const uint8_t *sender)
   {
     deserializeJson(json, incomingData.message);
     if (json["set"])
-      ledStatus = json["set"] == payloadOn ? true : false;
+      ledStatus = json["set"] == "ON" ? true : false;
     if (json["brightness"])
       brightness = json["brightness"];
     if (json["temperature"])
@@ -197,6 +200,7 @@ void onConfirmReceiving(const uint8_t *target, const uint16_t id, const bool sta
   {
     espnow_message_t message = espnowMessage[i];
     if (message.id == id)
+    {
       if (status)
         espnowMessage.erase(espnowMessage.begin() + i);
       else
@@ -205,13 +209,15 @@ void onConfirmReceiving(const uint8_t *target, const uint16_t id, const bool sta
         espnowMessage.at(i) = message;
       }
     }
+  }
 }
 
 void loadConfig()
 {
-  if (!SPIFFS.exists("/config.json"))
+  ETS_GPIO_INTR_DISABLE();
+  if (!LittleFS.exists("/config.json"))
     saveConfig();
-  File file = SPIFFS.open("/config.json", "r");
+  File file = LittleFS.open("/config.json", "r");
   String jsonFile = file.readString();
   StaticJsonDocument<512> json;
   deserializeJson(json, jsonFile);
@@ -230,10 +236,13 @@ void loadConfig()
   green = json["green"];
   blue = json["blue"];
   file.close();
+  delay(50);
+  ETS_GPIO_INTR_ENABLE();
 }
 
 void saveConfig()
 {
+  ETS_GPIO_INTR_DISABLE();
   StaticJsonDocument<512> json;
   json["firmware"] = firmware;
   json["espnowNetName"] = espnowNetName;
@@ -251,15 +260,17 @@ void saveConfig()
   json["green"] = green;
   json["blue"] = blue;
   json["system"] = "empty";
-  File file = SPIFFS.open("/config.json", "w");
+  File file = LittleFS.open("/config.json", "w");
   serializeJsonPretty(json, file);
   file.close();
+  delay(50);
+  ETS_GPIO_INTR_ENABLE();
 }
 
 void setupWebServer()
 {
   webServer.on("/", HTTP_GET, [](AsyncWebServerRequest *request)
-               { request->send(SPIFFS, "/index.htm"); });
+               { request->send(LittleFS, "/index.htm"); });
 
   webServer.on("/setting", HTTP_GET, [](AsyncWebServerRequest *request)
                {
@@ -281,8 +292,8 @@ void setupWebServer()
 
   webServer.onNotFound([](AsyncWebServerRequest *request)
                        { 
-        if (SPIFFS.exists(request->url()))
+        if (LittleFS.exists(request->url()))
-        request->send(SPIFFS, request->url());
+        request->send(LittleFS, request->url());
         else
         {
         request->send(404, "text/plain", "File Not Found");
@@ -336,12 +347,10 @@ void sendConfigMessage()
   esp_now_payload_data_t outgoingData{ENDT_LED, ENPT_CONFIG};
   espnow_message_t message;
   StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
-  json["name"] = deviceName;
+  json[MCMT_DEVICE_NAME] = deviceName;
-  json["unit"] = 1;
+  json[MCMT_DEVICE_UNIT] = 1;
-  json["type"] = HACT_LIGHT;
+  json[MCMT_COMPONENT_TYPE] = HACT_LIGHT;
-  json["class"] = ledType;
+  json[MCMT_DEVICE_CLASS] = ledType;
-  json["payload_on"] = payloadOn;
-  json["payload_off"] = payloadOff;
   serializeJsonPretty(json, outgoingData.message);
   memcpy(&message.message, &outgoingData, sizeof(esp_now_payload_data_t));
   message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
@@ -357,7 +366,7 @@ void sendStatusMessage()
   esp_now_payload_data_t outgoingData{ENDT_LED, ENPT_STATE};
   espnow_message_t message;
   StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
-  json["state"] = ledStatus ? payloadOn : payloadOff;
+  json["state"] = ledStatus ? "ON" : "OFF";
   json["brightness"] = brightness;
   json["temperature"] = temperature;
   json["rgb"] = String(red) + "," + String(green) + "," + String(blue);