Tested on
- AP-FUTURE RGB Led controller. Built on Tuya WiFi module WB3S (BK7231N chip). Replacement required. Performed replacement with ESP-12E. Photo. A connect EN to VCC is required. A pull-up to GND of GPIO15 is required (i used a 0805 10K SMD resistor on top of the module pins).
Device type RGB
Red GPIO GPIO04
Green GPIO GPIO12
Blue GPIO GPIO14
- FLYIDEA RGBW Light E27 15W (Coming soon)
- FLYIDEA RGBWW Light E14 7W (Coming soon)