README.md

@@ -1,17 +1,15 @@
 # ESP-NOW switch for ESP8266
 
-ESP-NOW based switch for ESP8266. Alternate firmware for Tuya/SmartLife/eWeLink WiFi switches.
+ESP-NOW based switch for ESP8266. Alternate firmware for Tuya/SmartLife WiFi switches.
 
 ## Features
 
-1. After turn on (or after rebooting) creates an access point named "ESP-NOW switch XXXXXXXXXXXX" with password "12345678" (IP 192.168.4.1). Access point will be shown during 5 minutes. The rest of the time access point is a hidden.
+1. After turn on (or after rebooting) creates an access point named "ESP-NOW Switch XXXXXXXXXXXX" with password "12345678" (IP 192.168.4.1). Access point will be shown during 5 minutes. The rest of the time access point is a hidden.
 2. Periodically transmission of system information (every 60 seconds), availability status (every 10 seconds) and state status (every 300 seconds) to the gateway.
 3. Saves the last state when the power is turned off. Goes to the last state when the power is turned on.
 4. Automatically adds switch configuration to Home Assistan via MQTT discovery as a switch.
 5. Possibility firmware update over OTA (if is allows the size of the flash memory).
 6. Web interface for settings.
-7. Optionally support one external one wire digital climate sensor (DS18B20, DHT11 or DHT22) with automatically added sensor configuration to Home Assistan via MQTT discovery as a sensor. Periodically transmission sensor status (every 300 seconds) to the gateway.
-8. Normal or reverse relay mode (normal by default).
   
 ## Notes
 
@@ -21,14 +19,11 @@ ESP-NOW based switch for ESP8266. Alternate firmware for Tuya/SmartLife/eWeLink
 
 ## Tested on
 
-See [here](https://github.com/aZholtikov/ESP-NOW-Switch/tree/main/hardware).
+Coming soon.
 
 ## Attention
 
 1. A gateway is required. For details see [ESP-NOW Gateway](https://github.com/aZholtikov/ESP-NOW-Gateway).
 2. ESP-NOW network name must be set same of all another ESP-NOW devices in network.
-3. If encryption is used, the key must be set same of all another ESP-NOW devices in network.
-4. Upload the "data" folder (with web interface) into the filesystem before flashing.
-5. For using this firmware on Tuya/SmartLife/eWeLink WiFi switches, the WiFi module must be replaced with an ESP8266 compatible module (if necessary).
-
-Any feedback via [e-mail](mailto:github@zh.com.ru) would be appreciated. Or... [Buy me a coffee](https://paypal.me/aZholtikov).
+3. Upload the "data" folder (with web interface) into the filesystem before flashing.
+4. For using this firmware on Tuya/SmartLife WiFi switches, the WiFi module must be replaced with an ESP8266 compatible module (if necessary).

data/function.js

@@ -10,7 +10,7 @@ function createXmlHttpObject() {
 
 function load() {
     if (xmlHttp.readyState == 0 || xmlHttp.readyState == 4) {
-        xmlHttp.open('GET', '/config', true);
+        xmlHttp.open('PUT', '/config.json', true);
         xmlHttp.send(null);
         xmlHttp.onload = function () {
             jsonResponse = JSON.parse(xmlHttp.responseText);
@@ -29,7 +29,6 @@ function loadBlock() {
     }
     document.getElementsByTagName('body')[0].innerHTML = newString;
     setFirmvareValue('version', 'firmware');
-    setGpioValue('workModeSelect', 'workMode');
     setGpioValue('relayPinSelect', 'relayPin');
     setGpioValue('relayPinTypeSelect', 'relayPinType');
     setGpioValue('ledPinSelect', 'ledPin');
@@ -38,8 +37,6 @@ function loadBlock() {
     setGpioValue('buttonPinTypeSelect', 'buttonPinType');
     setGpioValue('extButtonPinSelect', 'extButtonPin');
     setGpioValue('extButtonPinTypeSelect', 'extButtonPinType');
-    setGpioValue('sensorPinSelect', 'sensorPin');
-    setGpioValue('sensorTypeSelect', 'sensorType');
     handleServerResponse();
 }
 
@@ -70,10 +67,7 @@ function saveSetting(submit) {
         + "&buttonPin=" + getSelectValue('buttonPinSelect')
         + "&buttonPinType=" + getSelectValue('buttonPinTypeSelect')
         + "&extButtonPin=" + getSelectValue('extButtonPinSelect')
-        + "&extButtonPinType=" + getSelectValue('extButtonPinTypeSelect')
-        + "&sensorPin=" + getSelectValue('sensorPinSelect')
-        + "&sensorType=" + getSelectValue('sensorTypeSelect')
-        + "&workMode=" + getSelectValue('workModeSelect');
+        + "&extButtonPinType=" + getSelectValue('extButtonPinTypeSelect');
     sendRequest(submit, server);
     alert("Please restart device for changes apply.");
 }

data/index.htm

@@ -29,15 +29,6 @@
                 title="ESP-NOW network name (1 to 20 characters)" />
         </div>
 
-        <div class="wrapper">
-            <p class="text-select">Work mode:</p>
-            <input id="workMode" value="{{workMode}}" hidden />
-            <p><select id="workModeSelect">
-                    <option value="0">NORMAL</option>
-                    <option value="1">REVERSE</option>
-                </select></p>
-        </div>
-
         <div class="wrapper">
             <p class="text-select">Relay GPIO:</p>
             <input id="relayPin" value="{{relayPin}}" hidden />
@@ -154,37 +145,6 @@
                 </select></p>
         </div>
 
-        <div class="wrapper">
-            <p class="text-select">Ext sensor GPIO:</p>
-            <input id="sensorPin" value="{{sensorPin}}" hidden />
-            <input id="sensorType" value="{{sensorType}}" hidden />
-            <p><select id="sensorPinSelect">
-                    <option value="0">NONE</option>
-                    <option value="1">GPIO01</option>
-                    <option value="2">GPIO02</option>
-                    <option value="3">GPIO03</option>
-                    <option value="4">GPIO04</option>
-                    <option value="5">GPIO05</option>
-                    <option value="6">GPIO06</option>
-                    <option value="7">GPIO07</option>
-                    <option value="8">GPIO08</option>
-                    <option value="9">GPIO09</option>
-                    <option value="10">GPIO10</option>
-                    <option value="11">GPIO11</option>
-                    <option value="12">GPIO12</option>
-                    <option value="13">GPIO13</option>
-                    <option value="14">GPIO14</option>
-                    <option value="15">GPIO15</option>
-                    <option value="16">GPIO16</option>
-                </select></p>
-            <p><select id="sensorTypeSelect">
-                    <option value="0">NONE</option>
-                    <option value="1">DS18B20</option>
-                    <option value="2">DHT11</option>
-                    <option value="3">DHT22</option>
-                </select></p>
-        </div>
-
         <div class="wrapper">
             <input class="btn" type="submit" value="Save" onclick="saveSetting(this);">
             <input class="btn" type="submit" value="Restart" onclick="restart(this);">

data/style.css

@@ -1,7 +1,3 @@
-p{
-    margin: 0 0;
-}
-
 body {
     font-family: "Gill Sans", sans-serif;
     background: rgb(255, 255, 255);
@@ -25,8 +21,6 @@ h1 {
     font-weight: 600;
     flex-shrink: 0;
     margin-right: 10px;
-    margin-left: 10px;
-    margin: 10px 0;
 }
 
 .text-select {
@@ -48,7 +42,6 @@ input {
     border-radius: 5px;
     border: none;
     margin-bottom: 10px;
-    margin-left: 10px;
     padding: 0 10px;
     color: rgb(0, 0, 0);
     background: #a3e0f1;
@@ -83,8 +76,6 @@ select:hover {
     background: rgb(65, 125, 238);
     color: white;
     transition: .5s;
-    margin-left: 0;
-    margin-top: 8px;
 }
 
 .btn:hover {
@@ -98,10 +89,6 @@ select:hover {
     width: 100%;
 }
 
-#espnowNetName {
-    margin-bottom: 15px;
-}
-
 .wrapper.wrapper--end {
     align-items: baseline;
 }

hardware/README.md

@@ -1,28 +0,0 @@
-# Tested on
-
-1. MOES 1CH 10A. Built on Tuya WiFi module WA2 (WB2S) (BK7231T chip). Replacement required. Performed replacement with ESP-02S (analogue of TYWE2S but with 2Mb flash). [Photo](https://github.com/aZholtikov/ESP-NOW-Switch/tree/main/hardware/MOES_1CH_10A).
-
-```text
-    Relay GPIO          GPIO12      HIGH
-    Led GPIO            GPIO04      LOW
-    Button GPIO         GPIO13      RISING
-```
-
-2. MINI 1CH 16A. Built on Tuya WiFi module WB2S (BK7231T chip). Replacement required. Performed replacement with ESP-02S (analogue of TYWE2S but with 2Mb flash). [Photo](https://github.com/aZholtikov/ESP-NOW-Switch/tree/main/hardware/MINI_1CH_16A).
-
-```text
-    Relay GPIO          GPIO13      HIGH
-    Led GPIO            GPIO04      LOW
-    Button GPIO         GPIO03      RISING
-    Ext button GPIO     GPIO14      FALLING
-```
-
-3. TH 1CH 16A + SENSOR. Built on ITEAD WiFi module PSF-B85 (ESP8285 chip). Replacement not required. [Photo](https://github.com/aZholtikov/ESP-NOW-Switch/tree/main/hardware/TH_1CH_16A). Attention! Because the button is connected to GPIO00 and the firmware does not work with GPIO00 required connect GPIO00 to GPIO04 on the module.
-
-```text
-    Relay GPIO          GPIO12      HIGH
-    Button GPIO         GPIO04      RISING
-    Ext sensor GPIO     GPIO14      DS18B20
-```
-
-4. LIGHT E27 SOCKET (Coming soon)

platformio.ini

@@ -1,78 +1,47 @@
-[env:ESP-12E]
+[env:esp8266]
 platform = espressif8266
 board = esp12e
 framework = arduino
-build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
-board_build.filesystem = littlefs
-board_build.ldscript = eagle.flash.4m1m.ld
+lib_extra_dirs = 
 lib_deps = 
 	https://github.com/aZholtikov/ZHNetwork
 	https://github.com/aZholtikov/ZHConfig
-	https://github.com/aZholtikov/Async-Web-Server
-	https://github.com/bblanchon/ArduinoJson
-	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/beegee-tokyo/DHTesp
+	bblanchon/ArduinoJson@^6.19.4
+	me-no-dev/ESP Async WebServer@^1.2.3
 
-[env:ESP-12E-OTA]
+[env:esp8266-ota]
 platform = espressif8266
 board = esp12e
 framework = arduino
-build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
-board_build.filesystem = littlefs
-board_build.ldscript = eagle.flash.4m1m.ld
 upload_port = 192.168.4.1
 upload_protocol = espota
+lib_extra_dirs = 
 lib_deps = 
 	https://github.com/aZholtikov/ZHNetwork
 	https://github.com/aZholtikov/ZHConfig
-	https://github.com/aZholtikov/Async-Web-Server
-	https://github.com/bblanchon/ArduinoJson
-	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/beegee-tokyo/DHTesp
+	bblanchon/ArduinoJson@^6.19.4
+	me-no-dev/ESP Async WebServer@^1.2.3
 
-[env:ESP-02S]
+[env:esp8285]
 platform = espressif8266
 board = esp8285
 framework = arduino
-build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
-board_build.filesystem = littlefs
-board_build.ldscript = eagle.flash.2m64.ld
+lib_extra_dirs = 
 lib_deps = 
 	https://github.com/aZholtikov/ZHNetwork
 	https://github.com/aZholtikov/ZHConfig
-	https://github.com/aZholtikov/Async-Web-Server
-	https://github.com/bblanchon/ArduinoJson
-	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/beegee-tokyo/DHTesp
+	bblanchon/ArduinoJson@^6.19.4
+	me-no-dev/ESP Async WebServer@^1.2.3
 
-[env:ESP-02S-OTA]
+[env:esp8285-ota]
 platform = espressif8266
 board = esp8285
 framework = arduino
-build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
-board_build.filesystem = littlefs
-board_build.ldscript = eagle.flash.2m64.ld
 upload_port = 192.168.4.1
 upload_protocol = espota
+lib_extra_dirs = 
 lib_deps = 
 	https://github.com/aZholtikov/ZHNetwork
 	https://github.com/aZholtikov/ZHConfig
-	https://github.com/aZholtikov/Async-Web-Server
-	https://github.com/bblanchon/ArduinoJson
-	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/beegee-tokyo/DHTesp
-
-[env:PSF-B85]
-platform = espressif8266
-board = esp8285
-framework = arduino
-build_flags = -D PIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK305
-board_build.filesystem = littlefs
-board_build.ldscript = eagle.flash.1m64.ld
-lib_deps = 
-	https://github.com/aZholtikov/ZHNetwork
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/aZholtikov/Async-Web-Server
-	https://github.com/bblanchon/ArduinoJson
-	https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/beegee-tokyo/DHTesp
+	bblanchon/ArduinoJson@^6.19.4
+	me-no-dev/ESP Async WebServer@^1.2.3

src/main.cpp

@@ -1,43 +1,33 @@
 #include "ArduinoJson.h"
 #include "ArduinoOTA.h"
-#include "ESPAsyncWebServer.h" // https://github.com/aZholtikov/Async-Web-Server
-#include "LittleFS.h"
-#include "EEPROM.h"
+#include "ESPAsyncWebServer.h"
 #include "Ticker.h"
-#include "DallasTemperature.h"
-#include "DHTesp.h"
 #include "ZHNetwork.h"
 #include "ZHConfig.h"
 
 void onBroadcastReceiving(const char *data, const uint8_t *sender);
 void onUnicastReceiving(const char *data, const uint8_t *sender);
-void onConfirmReceiving(const uint8_t *target, const uint16_t id, const bool status);
+void onConfirmReceiving(const uint8_t *target, const bool status);
 
 void loadConfig(void);
 void saveConfig(void);
-void loadStatus(void);
-void saveStatus(void);
 void setupWebServer(void);
 
 void buttonInterrupt(void);
 void switchingRelay(void);
 
-void sendAttributesMessage(const uint8_t type = ENST_NONE);
+void sendAttributesMessage(void);
 void sendKeepAliveMessage(void);
-void sendConfigMessage(const uint8_t type = ENST_NONE);
-void sendStatusMessage(const uint8_t type = ENST_NONE);
+void sendConfigMessage(void);
+void sendStatusMessage(void);
 
-typedef struct
-{
-  uint16_t id{0};
-  char message[200]{0};
-} espnow_message_t;
+const String firmware{"1.0"};
 
-struct deviceConfig
-{
 String espnowNetName{"DEFAULT"};
-  uint8_t workMode{0};
-  String deviceName = "ESP-NOW switch " + String(ESP.getChipId(), HEX);
+
+String deviceName{"ESP-NOW switch"};
+
+bool relayStatus{false};
 uint8_t relayPin{0};
 uint8_t relayPinType{1};
 uint8_t buttonPin{0};
@@ -46,15 +36,6 @@ struct deviceConfig
 uint8_t extButtonPinType{0};
 uint8_t ledPin{0};
 uint8_t ledPinType{0};
-  uint8_t sensorPin{0};
-  uint8_t sensorType{0};
-} config;
-
-std::vector<espnow_message_t> espnowMessage;
-
-const String firmware{"1.42"};
-
-bool relayStatus{false};
 
 bool wasMqttAvailable{false};
 
@@ -63,11 +44,6 @@ uint8_t gatewayMAC[6]{0};
 ZHNetwork myNet;
 AsyncWebServer webServer(80);
 
-OneWire oneWire;
-DallasTemperature ds18b20(&oneWire);
-
-DHTesp dht;
-
 Ticker buttonInterruptTimer;
 
 Ticker gatewayAvailabilityCheckTimer;
@@ -80,57 +56,54 @@ void apModeHideTimerCallback(void);
 Ticker attributesMessageTimer;
 bool attributesMessageTimerSemaphore{true};
 void attributesMessageTimerCallback(void);
+Ticker attributesMessageResendTimer;
+bool attributesMessageResendTimerSemaphore{false};
 
 Ticker keepAliveMessageTimer;
 bool keepAliveMessageTimerSemaphore{true};
 void keepAliveMessageTimerCallback(void);
+Ticker keepAliveMessageResendTimer;
+bool keepAliveMessageResendTimerSemaphore{false};
+
+Ticker configMessageResendTimer;
+bool configMessageResendTimerSemaphore{false};
 
 Ticker statusMessageTimer;
 bool statusMessageTimerSemaphore{true};
 void statusMessageTimerCallback(void);
+Ticker statusMessageResendTimer;
+bool statusMessageResendTimerSemaphore{false};
 
 void setup()
 {
-  LittleFS.begin();
+  SPIFFS.begin();
 
   loadConfig();
-  loadStatus();
 
-  if (config.sensorPin)
+  if (relayPin)
   {
-    if (config.sensorType == ENST_DS18B20)
-      oneWire.begin(config.sensorPin);
-    if (config.sensorType == ENST_DHT11 || config.sensorType == ENST_DHT22)
-      dht.setup(config.sensorPin, DHTesp::AUTO_DETECT);
+    pinMode(relayPin, OUTPUT);
+    digitalWrite(relayPin, relayPinType ? relayStatus : !relayStatus);
   }
-  if (config.relayPin)
+  if (ledPin)
   {
-    pinMode(config.relayPin, OUTPUT);
-    if (config.workMode)
-      digitalWrite(config.relayPin, config.relayPinType ? !relayStatus : relayStatus);
-    else
-      digitalWrite(config.relayPin, config.relayPinType ? relayStatus : !relayStatus);
+    pinMode(ledPin, OUTPUT);
+    digitalWrite(ledPin, ledPinType ? relayStatus : !relayStatus);
   }
-  if (config.ledPin)
-  {
-    pinMode(config.ledPin, OUTPUT);
-    digitalWrite(config.ledPin, config.ledPinType ? relayStatus : !relayStatus);
-  }
-  if (config.buttonPin)
-    attachInterrupt(config.buttonPin, buttonInterrupt, config.buttonPinType ? RISING : FALLING);
-  if (config.extButtonPin)
-    attachInterrupt(config.extButtonPin, buttonInterrupt, config.extButtonPinType ? RISING : FALLING);
+  if (buttonPin)
+    attachInterrupt(buttonPin, buttonInterrupt, buttonPinType ? RISING : FALLING);
+  if (extButtonPin)
+    attachInterrupt(extButtonPin, buttonInterrupt, extButtonPinType ? RISING : FALLING);
 
   WiFi.setSleepMode(WIFI_NONE_SLEEP);
-  myNet.begin(config.espnowNetName.c_str());
-  // myNet.setCryptKey("VERY_LONG_CRYPT_KEY"); // If encryption is used, the key must be set same of all another ESP-NOW devices in network.
+  myNet.begin(espnowNetName.c_str());
 
   myNet.setOnBroadcastReceivingCallback(onBroadcastReceiving);
   myNet.setOnUnicastReceivingCallback(onUnicastReceiving);
   myNet.setOnConfirmReceivingCallback(onConfirmReceiving);
 
   WiFi.mode(WIFI_AP_STA);
-  WiFi.softAP(("ESP-NOW switch " + String(ESP.getChipId(), HEX)).c_str(), "12345678", 1, 0);
+  WiFi.softAP(("ESP-NOW Switch " + myNet.getNodeMac()).c_str(), "12345678", 1, 0);
   apModeHideTimer.once(300, apModeHideTimerCallback);
 
   setupWebServer();
@@ -145,19 +118,11 @@ void setup()
 void loop()
 {
   if (attributesMessageTimerSemaphore)
-  {
     sendAttributesMessage();
-    if (config.sensorPin)
-      sendAttributesMessage(config.sensorType);
-  }
   if (keepAliveMessageTimerSemaphore)
     sendKeepAliveMessage();
   if (statusMessageTimerSemaphore)
-  {
     sendStatusMessage();
-    if (config.sensorPin)
-      sendStatusMessage(config.sensorType);
-  }
   myNet.maintenance();
   ArduinoOTA.handle();
 }
@@ -169,28 +134,18 @@ void onBroadcastReceiving(const char *data, const uint8_t *sender)
   if (incomingData.deviceType != ENDT_GATEWAY)
     return;
   if (myNet.macToString(gatewayMAC) != myNet.macToString(sender) && incomingData.payloadsType == ENPT_KEEP_ALIVE)
-    memcpy(&gatewayMAC, sender, 6);
+    memcpy(gatewayMAC, sender, 6);
   if (myNet.macToString(gatewayMAC) == myNet.macToString(sender) && incomingData.payloadsType == ENPT_KEEP_ALIVE)
   {
     isGatewayAvailable = true;
-    DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
+    StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
     deserializeJson(json, incomingData.message);
     bool temp = json["MQTT"] == "online" ? true : false;
     if (wasMqttAvailable != temp)
     {
       wasMqttAvailable = temp;
       if (temp)
-      {
         sendConfigMessage();
-        if (config.sensorPin)
-          sendConfigMessage(config.sensorType);
-        sendAttributesMessage();
-        if (config.sensorPin)
-          sendAttributesMessage(config.sensorType);
-        sendStatusMessage();
-        if (config.sensorPin)
-          sendStatusMessage(config.sensorType);
-      }
     }
     gatewayAvailabilityCheckTimer.once(15, gatewayAvailabilityCheckTimerCallback);
   }
@@ -202,169 +157,130 @@ void onUnicastReceiving(const char *data, const uint8_t *sender)
   memcpy(&incomingData, data, sizeof(esp_now_payload_data_t));
   if (incomingData.deviceType != ENDT_GATEWAY || myNet.macToString(gatewayMAC) != myNet.macToString(sender))
     return;
-  DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
+  StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
   if (incomingData.payloadsType == ENPT_SET)
   {
     deserializeJson(json, incomingData.message);
     relayStatus = json["set"] == "ON" ? true : false;
-    if (config.relayPin)
-    {
-      if (config.workMode)
-        digitalWrite(config.relayPin, config.relayPinType ? !relayStatus : relayStatus);
-      else
-        digitalWrite(config.relayPin, config.relayPinType ? relayStatus : !relayStatus);
-    }
-    if (config.ledPin)
-    {
-      if (config.workMode)
-        digitalWrite(config.ledPin, config.ledPinType ? !relayStatus : relayStatus);
-      else
-        digitalWrite(config.ledPin, config.ledPinType ? relayStatus : !relayStatus);
-    }
-    saveStatus();
+    if (relayPin)
+      digitalWrite(relayPin, relayPinType ? relayStatus : !relayStatus);
+    if (ledPin)
+      digitalWrite(ledPin, ledPinType ? relayStatus : !relayStatus);
+    saveConfig();
     sendStatusMessage();
   }
   if (incomingData.payloadsType == ENPT_UPDATE)
   {
-    WiFi.softAP(("ESP-NOW switch " + String(ESP.getChipId(), HEX)).c_str(), "12345678", 1, 0);
-    webServer.begin();
+    WiFi.softAP(("ESP-NOW Switch " + myNet.getNodeMac()).c_str(), "12345678", 1, 0);
     apModeHideTimer.once(300, apModeHideTimerCallback);
   }
   if (incomingData.payloadsType == ENPT_RESTART)
     ESP.restart();
 }
 
-void onConfirmReceiving(const uint8_t *target, const uint16_t id, const bool status)
-{
-  for (uint16_t i{0}; i < espnowMessage.size(); ++i)
-  {
-    espnow_message_t message = espnowMessage[i];
-    if (message.id == id)
+void onConfirmReceiving(const uint8_t *target, const bool status)
 {
   if (status)
-        espnowMessage.erase(espnowMessage.begin() + i);
-      else
   {
-        message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
-        espnowMessage.at(i) = message;
+    if (attributesMessageResendTimerSemaphore)
+    {
+      attributesMessageResendTimerSemaphore = false;
+      attributesMessageResendTimer.detach();
     }
+    if (keepAliveMessageResendTimerSemaphore)
+    {
+      keepAliveMessageResendTimerSemaphore = false;
+      keepAliveMessageResendTimer.detach();
+    }
+    if (configMessageResendTimerSemaphore)
+    {
+      configMessageResendTimerSemaphore = false;
+      configMessageResendTimer.detach();
+    }
+    if (statusMessageResendTimerSemaphore)
+    {
+      statusMessageResendTimerSemaphore = false;
+      statusMessageResendTimer.detach();
     }
   }
 }
 
 void loadConfig()
 {
-  ETS_GPIO_INTR_DISABLE();
-  EEPROM.begin(4096);
-  if (EEPROM.read(4095) == 254)
-  {
-    EEPROM.get(0, config);
-    EEPROM.end();
-  }
-  else
-  {
-    EEPROM.end();
+  if (!SPIFFS.exists("/config.json"))
     saveConfig();
-  }
-  delay(50);
-  ETS_GPIO_INTR_ENABLE();
+  File file = SPIFFS.open("/config.json", "r");
+  String jsonFile = file.readString();
+  StaticJsonDocument<512> json;
+  deserializeJson(json, jsonFile);
+  espnowNetName = json["espnowNetName"].as<String>();
+  deviceName = json["deviceName"].as<String>();
+  relayStatus = json["relayStatus"];
+  relayPin = json["relayPin"];
+  relayPinType = json["relayPinType"];
+  buttonPin = json["buttonPin"];
+  buttonPinType = json["buttonPinType"];
+  extButtonPin = json["extButtonPin"];
+  extButtonPinType = json["extButtonPinType"];
+  ledPin = json["ledPin"];
+  ledPinType = json["ledPinType"];
+  file.close();
 }
 
 void saveConfig()
 {
-  ETS_GPIO_INTR_DISABLE();
-  EEPROM.begin(4096);
-  EEPROM.write(4095, 254);
-  EEPROM.put(0, config);
-  EEPROM.end();
-  delay(50);
-  ETS_GPIO_INTR_ENABLE();
-}
-
-void loadStatus(void)
-{
-  ETS_GPIO_INTR_DISABLE();
-  if (!LittleFS.exists("/status.json"))
-    saveStatus();
-  File file = LittleFS.open("/status.json", "r");
-  String jsonFile = file.readString();
-  DynamicJsonDocument json(64); // To calculate the buffer size uses https://arduinojson.org/v6/assistant.
-  deserializeJson(json, jsonFile);
-  relayStatus = json["status"];
-  file.close();
-  delay(50);
-  ETS_GPIO_INTR_ENABLE();
-}
-
-void saveStatus(void)
-{
-  ETS_GPIO_INTR_DISABLE();
-  DynamicJsonDocument json(48); // To calculate the buffer size uses https://arduinojson.org/v6/assistant.
-  json["status"] = relayStatus;
+  StaticJsonDocument<512> json;
+  json["firmware"] = firmware;
+  json["espnowNetName"] = espnowNetName;
+  json["deviceName"] = deviceName;
+  json["relayStatus"] = relayStatus;
+  json["relayPin"] = relayPin;
+  json["relayPinType"] = relayPinType;
+  json["buttonPin"] = buttonPin;
+  json["buttonPinType"] = buttonPinType;
+  json["extButtonPin"] = extButtonPin;
+  json["extButtonPinType"] = extButtonPinType;
+  json["ledPin"] = ledPin;
+  json["ledPinType"] = ledPinType;
   json["system"] = "empty";
-  File file = LittleFS.open("/status.json", "w");
+  File file = SPIFFS.open("/config.json", "w");
   serializeJsonPretty(json, file);
   file.close();
-  delay(50);
-  ETS_GPIO_INTR_ENABLE();
 }
 
 void setupWebServer()
 {
   webServer.on("/", HTTP_GET, [](AsyncWebServerRequest *request)
-               { request->send(LittleFS, "/index.htm"); });
-
-  webServer.on("/function.js", HTTP_GET, [](AsyncWebServerRequest *request)
-               { request->send(LittleFS, "/function.js"); });
-
-  webServer.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request)
-               { request->send(LittleFS, "/style.css"); });
+               { request->send(SPIFFS, "/index.htm"); });
 
   webServer.on("/setting", HTTP_GET, [](AsyncWebServerRequest *request)
                {
-        config.relayPin = request->getParam("relayPin")->value().toInt();
-        config.relayPinType = request->getParam("relayPinType")->value().toInt();
-        config.buttonPin = request->getParam("buttonPin")->value().toInt();
-        config.buttonPinType = request->getParam("buttonPinType")->value().toInt();
-        config.extButtonPin = request->getParam("extButtonPin")->value().toInt();
-        config.extButtonPinType = request->getParam("extButtonPinType")->value().toInt();
-        config.ledPin = request->getParam("ledPin")->value().toInt();
-        config.ledPinType = request->getParam("ledPinType")->value().toInt();
-        config.sensorPin = request->getParam("sensorPin")->value().toInt();
-        config.sensorType = request->getParam("sensorType")->value().toInt();
-        config.workMode = request->getParam("workMode")->value().toInt();
-        config.deviceName = request->getParam("deviceName")->value();
-        config.espnowNetName = request->getParam("espnowNetName")->value();
+        relayPin = request->getParam("relayPin")->value().toInt();
+        relayPinType = request->getParam("relayPinType")->value().toInt();
+        buttonPin = request->getParam("buttonPin")->value().toInt();
+        buttonPinType = request->getParam("buttonPinType")->value().toInt();
+        extButtonPin = request->getParam("extButtonPin")->value().toInt();
+        extButtonPinType = request->getParam("extButtonPinType")->value().toInt();
+        ledPin = request->getParam("ledPin")->value().toInt();
+        ledPinType = request->getParam("ledPinType")->value().toInt();
+        deviceName = request->getParam("deviceName")->value();
+        espnowNetName = request->getParam("espnowNetName")->value();
         request->send(200);
         saveConfig(); });
 
-  webServer.on("/config", HTTP_GET, [](AsyncWebServerRequest *request)
-               {
-        String configJson;
-        DynamicJsonDocument json(384); // To calculate the buffer size uses https://arduinojson.org/v6/assistant.
-        json["firmware"] = firmware;
-        json["espnowNetName"] = config.espnowNetName;
-        json["deviceName"] = config.deviceName;
-        json["relayPin"] = config.relayPin;
-        json["relayPinType"] = config.relayPinType;
-        json["buttonPin"] = config.buttonPin;
-        json["buttonPinType"] = config.buttonPinType;
-        json["extButtonPin"] = config.extButtonPin;
-        json["extButtonPinType"] = config.extButtonPinType;
-        json["ledPin"] = config.ledPin;
-        json["ledPinType"] = config.ledPinType;
-        json["sensorPin"] = config.sensorPin;
-        json["sensorType"] = config.sensorType;
-        json["workMode"] = config.workMode;
-        serializeJsonPretty(json, configJson);
-        request->send(200, "application/json", configJson); });
-
   webServer.on("/restart", HTTP_GET, [](AsyncWebServerRequest *request)
-               {request->send(200);
+               {
+        request->send(200);
         ESP.restart(); });
 
   webServer.onNotFound([](AsyncWebServerRequest *request)
-                       { request->send(404, "text/plain", "File Not Found"); });
+                       { 
+        if (SPIFFS.exists(request->url()))
+        request->send(SPIFFS, request->url());
+        else
+        {
+        request->send(404, "text/plain", "File Not Found");
+        } });
 
   webServer.begin();
 }
@@ -372,32 +288,22 @@ void setupWebServer()
 void IRAM_ATTR buttonInterrupt()
 {
   ETS_GPIO_INTR_DISABLE();
-  buttonInterruptTimer.once_ms(500, switchingRelay); // For prevent contact chatter.
+  buttonInterruptTimer.once_ms(50, switchingRelay); // For prevent contact chatter.
 }
 
 void switchingRelay()
 {
-  ETS_GPIO_INTR_ENABLE();
   relayStatus = !relayStatus;
-  if (config.relayPin)
-  {
-    if (config.workMode)
-      digitalWrite(config.relayPin, config.relayPinType ? !relayStatus : relayStatus);
-    else
-      digitalWrite(config.relayPin, config.relayPinType ? relayStatus : !relayStatus);
-  }
-  if (config.ledPin)
-  {
-    if (config.workMode)
-      digitalWrite(config.ledPin, config.ledPinType ? !relayStatus : relayStatus);
-    else
-      digitalWrite(config.ledPin, config.ledPinType ? relayStatus : !relayStatus);
-  }
-  saveStatus();
+  if (relayPin)
+    digitalWrite(relayPin, relayPinType ? relayStatus : !relayStatus);
+  if (ledPin)
+    digitalWrite(ledPin, ledPinType ? relayStatus : !relayStatus);
+  saveConfig();
   sendStatusMessage();
+  ETS_GPIO_INTR_ENABLE();
 }
 
-void sendAttributesMessage(const uint8_t type)
+void sendAttributesMessage()
 {
   if (!isGatewayAvailable)
     return;
@@ -407,25 +313,22 @@ void sendAttributesMessage(const uint8_t type)
   uint32_t hours = mins / 60;
   uint32_t days = hours / 24;
   esp_now_payload_data_t outgoingData{ENDT_SWITCH, ENPT_ATTRIBUTES};
-  espnow_message_t message;
-  DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
-  if (type == ENST_NONE)
-    json["Type"] = "ESP-NOW switch";
-  else
-  {
-    outgoingData.deviceType = ENDT_SENSOR;
-    json["Type"] = getValueName(esp_now_sensor_type_t(type));
-  }
+  StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
+  json["Type"] = "ESP-NOW Switch";
   json["MCU"] = "ESP8266";
   json["MAC"] = myNet.getNodeMac();
   json["Firmware"] = firmware;
   json["Library"] = myNet.getFirmwareVersion();
   json["Uptime"] = "Days:" + String(days) + " Hours:" + String(hours - (days * 24)) + " Mins:" + String(mins - (hours * 60));
-  serializeJsonPretty(json, outgoingData.message);
-  memcpy(&message.message, &outgoingData, sizeof(esp_now_payload_data_t));
-  message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
+  char buffer[sizeof(esp_now_payload_data_t::message)]{0};
+  serializeJsonPretty(json, buffer);
+  memcpy(outgoingData.message, buffer, sizeof(esp_now_payload_data_t::message));
+  char temp[sizeof(esp_now_payload_data_t)]{0};
+  memcpy(&temp, &outgoingData, sizeof(esp_now_payload_data_t));
+  myNet.sendUnicastMessage(temp, gatewayMAC, true);
 
-  espnowMessage.push_back(message);
+  attributesMessageResendTimerSemaphore = true;
+  attributesMessageResendTimer.once(1, sendAttributesMessage);
 }
 
 void sendKeepAliveMessage()
@@ -434,104 +337,64 @@ void sendKeepAliveMessage()
     return;
   keepAliveMessageTimerSemaphore = false;
   esp_now_payload_data_t outgoingData{ENDT_SWITCH, ENPT_KEEP_ALIVE};
-  espnow_message_t message;
-  memcpy(&message.message, &outgoingData, sizeof(esp_now_payload_data_t));
-  message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
+  char temp[sizeof(esp_now_payload_data_t)]{0};
+  memcpy(&temp, &outgoingData, sizeof(esp_now_payload_data_t));
+  myNet.sendUnicastMessage(temp, gatewayMAC, true);
 
-  espnowMessage.push_back(message);
+  keepAliveMessageResendTimerSemaphore = true;
+  keepAliveMessageResendTimer.once(1, sendKeepAliveMessage);
 }
 
-void sendConfigMessage(const uint8_t type)
+void sendConfigMessage()
 {
   if (!isGatewayAvailable)
     return;
   esp_now_payload_data_t outgoingData{ENDT_SWITCH, ENPT_CONFIG};
-  espnow_message_t message;
-  DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
-  if (type == ENST_NONE)
-  {
-    json[MCMT_DEVICE_NAME] = config.deviceName;
-    json[MCMT_DEVICE_UNIT] = 1;
-    json[MCMT_COMPONENT_TYPE] = HACT_SWITCH;
-    json[MCMT_DEVICE_CLASS] = HASWDC_SWITCH;
-    json[MCMT_VALUE_TEMPLATE] = "state";
-  }
-  if (type == ENST_DS18B20 || type == ENST_DHT11 || type == ENST_DHT22)
-  {
-    outgoingData.deviceType = ENDT_SENSOR;
-    json[MCMT_DEVICE_NAME] = config.deviceName + " temperature";
-    json[MCMT_DEVICE_UNIT] = 2;
-    json[MCMT_COMPONENT_TYPE] = HACT_SENSOR;
-    json[MCMT_DEVICE_CLASS] = HASDC_TEMPERATURE;
-    json[MCMT_VALUE_TEMPLATE] = "temperature";
-    json[MCMT_UNIT_OF_MEASUREMENT] = "°C";
-    json[MCMT_EXPIRE_AFTER] = 900;
-  }
-  serializeJsonPretty(json, outgoingData.message);
-  memcpy(&message.message, &outgoingData, sizeof(esp_now_payload_data_t));
-  message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
+  StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
+  json["name"] = deviceName;
+  json["unit"] = 1;
+  json["type"] = getValueName(HACT_SWITCH);
+  json["class"] = getValueName(HASWDC_SWITCH);
+  json["reverse"] = "false";
+  char buffer[sizeof(esp_now_payload_data_t::message)]{0};
+  serializeJsonPretty(json, buffer);
+  memcpy(outgoingData.message, buffer, sizeof(esp_now_payload_data_t::message));
+  char temp[sizeof(esp_now_payload_data_t)]{0};
+  memcpy(&temp, &outgoingData, sizeof(esp_now_payload_data_t));
+  myNet.sendUnicastMessage(temp, gatewayMAC, true);
 
-  espnowMessage.push_back(message);
-
-  if (type == ENST_DHT11 || type == ENST_DHT22)
-  {
-    outgoingData.deviceType = ENDT_SENSOR;
-    json[MCMT_DEVICE_NAME] = config.deviceName + " humidity";
-    json[MCMT_DEVICE_UNIT] = 3;
-    json[MCMT_COMPONENT_TYPE] = HACT_SENSOR;
-    json[MCMT_DEVICE_CLASS] = HASDC_HUMIDITY;
-    json[MCMT_VALUE_TEMPLATE] = "humidity";
-    json[MCMT_UNIT_OF_MEASUREMENT] = "%";
-    json[MCMT_EXPIRE_AFTER] = 900;
-
-    serializeJsonPretty(json, outgoingData.message);
-    memcpy(&message.message, &outgoingData, sizeof(esp_now_payload_data_t));
-    message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
-
-    espnowMessage.push_back(message);
-  }
+  configMessageResendTimerSemaphore = true;
+  configMessageResendTimer.once(5, sendConfigMessage);
 }
 
-void sendStatusMessage(const uint8_t type)
+void sendStatusMessage()
 {
   if (!isGatewayAvailable)
     return;
   statusMessageTimerSemaphore = false;
   esp_now_payload_data_t outgoingData{ENDT_SWITCH, ENPT_STATE};
-  espnow_message_t message;
-  DynamicJsonDocument json(sizeof(esp_now_payload_data_t::message));
-  if (type == ENST_NONE)
+  StaticJsonDocument<sizeof(esp_now_payload_data_t::message)> json;
   json["state"] = relayStatus ? "ON" : "OFF";
-  if (type == ENST_DS18B20)
-  {
-    outgoingData.deviceType = ENDT_SENSOR;
-    ds18b20.requestTemperatures();
-    json["temperature"] = int8_t(ds18b20.getTempCByIndex(0));
-  }
-  if (type == ENST_DHT11 || type == ENST_DHT22)
-  {
-    outgoingData.deviceType = ENDT_SENSOR;
-    json["temperature"] = int8_t(dht.getTemperature());
-    json["humidity"] = int8_t(dht.getHumidity());
-  }
-  serializeJsonPretty(json, outgoingData.message);
-  memcpy(&message.message, &outgoingData, sizeof(esp_now_payload_data_t));
-  message.id = myNet.sendUnicastMessage(message.message, gatewayMAC, true);
+  char buffer[sizeof(esp_now_payload_data_t::message)]{0};
+  serializeJsonPretty(json, buffer);
+  memcpy(&outgoingData.message, &buffer, sizeof(esp_now_payload_data_t::message));
+  char temp[sizeof(esp_now_payload_data_t)]{0};
+  memcpy(&temp, &outgoingData, sizeof(esp_now_payload_data_t));
+  myNet.sendUnicastMessage(temp, gatewayMAC, true);
 
-  espnowMessage.push_back(message);
+  statusMessageResendTimerSemaphore = true;
+  statusMessageResendTimer.once(1, sendStatusMessage);
 }
 
 void gatewayAvailabilityCheckTimerCallback()
 {
   isGatewayAvailable = false;
-  memset(&gatewayMAC, 0, 6);
-  espnowMessage.clear();
+  memset(gatewayMAC, 0, 6);
 }
 
 void apModeHideTimerCallback()
 {
-  WiFi.softAP(("ESP-NOW switch " + String(ESP.getChipId(), HEX)).c_str(), "12345678", 1, 1);
-  webServer.end();
+  WiFi.softAP(("ESP-NOW Switch " + myNet.getNodeMac()).c_str(), "12345678", 1, 1);
 }
 
 void attributesMessageTimerCallback()