mirror of
https://github.com/miguel5612/MQSensorsLib.git
synced 2025-03-15 05:17:30 +03:00
125 lines
5.4 KiB
C++
125 lines
5.4 KiB
C++
/*
|
|
MQUnifiedsensor Library - reading an MQ135
|
|
|
|
Demonstrates the use a MQ135 sensor.
|
|
Library originally added 01 may 2019
|
|
by Miguel A Califa, Yersson Carrillo, Ghiordy Contreras, Mario Rodriguez
|
|
|
|
Added example
|
|
modified 23 May 2019
|
|
by Miguel Califa
|
|
|
|
Updated library usage
|
|
modified 26 March 2020
|
|
by Miguel Califa
|
|
|
|
Wiring:
|
|
https://github.com/miguel5612/MQSensorsLib_Docs/blob/master/static/img/MQ_Arduino.PNG
|
|
Please take care, arduino A0 pin represent the analog input configured on #define pin
|
|
|
|
This example code is in the public domain.
|
|
|
|
*/
|
|
|
|
//Include the library
|
|
#include <MQUnifiedsensor.h>
|
|
|
|
//Definitions
|
|
#define placa "Arduino UNO"
|
|
#define Voltage_Resolution 5
|
|
#define pin A0 //Analog input 0 of your arduino
|
|
#define type "MQ-135" //MQ135
|
|
#define ADC_Bit_Resolution 10 // For arduino UNO/MEGA/NANO
|
|
#define RatioMQ135CleanAir 3.6//RS / R0 = 3.6 ppm
|
|
//#define calibration_button 13 //Pin to calibrate your sensor
|
|
|
|
//Declare Sensor
|
|
MQUnifiedsensor MQ135(placa, Voltage_Resolution, ADC_Bit_Resolution, pin, type);
|
|
|
|
void setup() {
|
|
//Init the serial port communication - to debug the library
|
|
Serial.begin(9600); //Init serial port
|
|
|
|
//Set math model to calculate the PPM concentration and the value of constants
|
|
MQ135.setRegressionMethod(1); //_PPM = a*ratio^b
|
|
|
|
|
|
/***************************** MQ CAlibration ********************************************/
|
|
// Explanation:
|
|
// In this routine the sensor will measure the resistance of the sensor supposing before was pre-heated
|
|
// and now is on clean air (Calibration conditions), and it will setup R0 value.
|
|
// We recomend execute this routine only on setup or on the laboratory and save on the eeprom of your arduino
|
|
// This routine not need to execute to every restart, you can load your R0 if you know the value
|
|
// Acknowledgements: https://jayconsystems.com/blog/understanding-a-gas-sensor
|
|
Serial.print("Calibrating please wait.");
|
|
float calcR0 = 0;
|
|
for(int i = 1; i<=10; i ++)
|
|
{
|
|
MQ135.update(); // Update data, the arduino will be read the voltage on the analog pin
|
|
calcR0 += MQ135.calibrate(RatioMQ135CleanAir);
|
|
Serial.print(".");
|
|
}
|
|
MQ135.setR0(calcR0/10);
|
|
Serial.println(" done!.");
|
|
|
|
if(isinf(calcR0)) {Serial.println("Warning: Conection issue founded, R0 is infite (Open circuit detected) please check your wiring and supply"); while(1);}
|
|
if(calcR0 == 0){Serial.println("Warning: Conection issue founded, R0 is zero (Analog pin with short circuit to ground) please check your wiring and supply"); while(1);}
|
|
/***************************** MQ CAlibration ********************************************/
|
|
|
|
/*
|
|
//If the RL value is different from 10K please assign your RL value with the following method:
|
|
MQ135.setRL(10);
|
|
*/
|
|
|
|
MQ135.init();
|
|
/***************************** MQ Init ********************************************/
|
|
//Input: setup flag, if this function are on setup will print the headers (Optional - Default value: False)
|
|
//Output: print on serial port the information about sensor and sensor readings
|
|
//Remarks: Configure the pin of arduino as input.
|
|
/************************************************************************************/
|
|
|
|
Serial.println("** Lectures from MQ-135 ****");
|
|
Serial.println("| CO | Alcohol | CO2 | Tolueno | NH4 | Acteona |");
|
|
}
|
|
|
|
void loop() {
|
|
MQ135.update(); // Update data, the arduino will be read the voltage on the analog pin
|
|
|
|
MQ135.setA(605.18); MQ135.setB(-3.937); // Configurate the ecuation values to get CO concentration
|
|
float CO = MQ135.readSensor(); // Sensor will read PPM concentration using the model and a and b values setted before or in the setup
|
|
|
|
MQ135.setA(77.255); MQ135.setB(-3.18); // Configurate the ecuation values to get Alcohol concentration
|
|
float Alcohol = MQ135.readSensor(); // Sensor will read PPM concentration using the model and a and b values setted before or in the setup
|
|
|
|
MQ135.setA(110.47); MQ135.setB(-2.862); // Configurate the ecuation values to get CO2 concentration
|
|
float CO2 = MQ135.readSensor(); // Sensor will read PPM concentration using the model and a and b values setted before or in the setup
|
|
|
|
MQ135.setA(44.947); MQ135.setB(-3.445); // Configurate the ecuation values to get Tolueno concentration
|
|
float Tolueno = MQ135.readSensor(); // Sensor will read PPM concentration using the model and a and b values setted before or in the setup
|
|
|
|
MQ135.setA(102.2 ); MQ135.setB(-2.473); // Configurate the ecuation values to get NH4 concentration
|
|
float NH4 = MQ135.readSensor(); // Sensor will read PPM concentration using the model and a and b values setted before or in the setup
|
|
|
|
MQ135.setA(34.668); MQ135.setB(-3.369); // Configurate the ecuation values to get Acetona concentration
|
|
float Acetona = MQ135.readSensor(); // Sensor will read PPM concentration using the model and a and b values setted before or in the setup
|
|
|
|
Serial.print("| "); Serial.print(CO);
|
|
Serial.print(" | "); Serial.print(Alcohol);
|
|
Serial.print(" | "); Serial.print(CO2);
|
|
Serial.print(" | "); Serial.print(Tolueno);
|
|
Serial.print(" | "); Serial.print(NH4);
|
|
Serial.print(" | "); Serial.print(Acetona);
|
|
Serial.println(" |");
|
|
/*
|
|
Exponential regression:
|
|
GAS | a | b
|
|
CO | 605.18 | -3.937
|
|
Alcohol | 77.255 | -3.18
|
|
CO2 | 110.47 | -2.862
|
|
Tolueno | 44.947 | -3.445
|
|
NH4 | 102.2 | -2.473
|
|
Acetona | 34.668 | -3.369
|
|
*/
|
|
|
|
delay(500); //Sampling frequency
|
|
} |