Add mozc double sided version.

Change-Id: I3c50b5c3435c3c01c79bfc14c5d605701a423356
Co-authored-by: Takashi Toyoshima <toyoshim@google.com>
Co-authored-by: Shun Ikejima <ikejima@google.com>
Reviewed-by: Eliot Courtney <edcourtney@google.com>

mozc-doublesided/board/usb/usb.rules

@@ -0,0 +1,79 @@
+
+(rules PCB mozc2024
+  (snap_angle 
+    fortyfive_degree
+  )
+  (autoroute_settings
+    (fanout off)
+    (autoroute on)
+    (postroute on)
+    (vias on)
+    (via_costs 50)
+    (plane_via_costs 5)
+    (start_ripup_costs 100)
+    (start_pass_no 1467)
+    (layer_rule F.Cu
+      (active on)
+      (preferred_direction vertical)
+      (preferred_direction_trace_costs 1.0)
+      (against_preferred_direction_trace_costs 5.0)
+    )
+    (layer_rule B.Cu
+      (active on)
+      (preferred_direction horizontal)
+      (preferred_direction_trace_costs 1.0)
+      (against_preferred_direction_trace_costs 1.3)
+    )
+  )
+  (rule
+    (width 200.0)
+    (clear 200.0)
+    (clear 100.0 (type smd_to_turn_gap))
+    (clear 50.0 (type smd_smd))
+  )
+  (padstack "Via[0-1]_600:300_um"
+    (shape
+      (circle F.Cu 600.0 0.0 0.0)
+    )
+    (shape
+      (circle B.Cu 600.0 0.0 0.0)
+    )
+    (attach off)
+  )
+  (via 
+    "Via[0-1]_600:300_um" "Via[0-1]_600:300_um" default
+  )
+  (via 
+    "Via[0-1]_600:300_um-kicad_default" "Via[0-1]_600:300_um" "kicad_default"
+  )
+  (via_rule
+    default "Via[0-1]_600:300_um"
+  )
+  (via_rule
+    "kicad_default" "Via[0-1]_600:300_um-kicad_default"
+  )
+  (class default
+    (clearance_class default)
+    (via_rule default)
+    (rule
+      (width 200.0)
+    )
+    (circuit 
+      (use_layer F.Cu B.Cu)
+    )
+  )
+  (class "kicad_default"
+    "Net-(D1-DOUT)" +5V "Net-(D1-DIN)" GND "Net-(D2-DOUT)" "Net-(D3-DOUT)" "Net-(D4-DOUT)" /SW1
+    /SW2 /SW3 /SW4 /SDA +3.3V /RDYout /DP "Net-(U1-PB8)"
+    /DM /SWCLK /SWDIO /SCL /RDYin /LED "unconnected-(U1-PA7-Pad13)" "unconnected-(U1-NRST-Pad4)"
+    "unconnected-(U1-PA6-Pad12)" "unconnected-(R2-Pad2)"
+    (clearance_class "kicad_default")
+    (via_rule kicad_default)
+    (rule
+      (width 200.0)
+    )
+    (circuit 
+      (use_layer F.Cu B.Cu)
+    )
+  )
+)