Initial upload of the Physical Flick keyboard files.

mozc-furikku/arduino/flick/flick.ino

@@ -0,0 +1,110 @@
+#include <SPI.h>
+#include "flick_keyboard.h"
+
+// Number of A/D converter ICs.
+const int kNumAdcIc = 3;
+const int kCsPins[kNumAdcIc] = {10, 9, 8};
+
+const int kButtonPins[12] = {
+  // If you use Arduino Nano version 2, use A6 and A7 instead of A0 and A1.
+  // (which are actually port C, thus used as digital input)
+  A0, A1, A2, A3, A4, A5,
+  7, 6, 5, 4, 3, 2
+};
+
+FlickKeyboard keyboard;
+
+void setup() {
+  Serial.begin(115200);
+  for (size_t i = 0; i < kNumAdcIc; i++) {
+    pinMode(kCsPins[i], OUTPUT);
+    digitalWrite(kCsPins[i], HIGH);
+  }
+  for (size_t i = 0; i < 12; i++) {
+    pinMode(kButtonPins[i], INPUT_PULLUP);
+  }
+  SPI.begin();
+  SPI.beginTransaction(SPISettings(1000000, MSBFIRST, SPI_MODE0));
+}
+
+void SelectChip(uint8_t id) {
+  if (id > kNumAdcIc) {
+    return;
+  }
+  for (size_t i = 0; i < kNumAdcIc; i++) {
+    digitalWrite(kCsPins[i], HIGH);
+  }
+  digitalWrite(kCsPins[id], LOW);
+}
+
+void DeselectChips() {
+  for (size_t i = 0; i < kNumAdcIc; i++) {
+    digitalWrite(kCsPins[i], HIGH);
+  }
+}
+
+// Fetch a ADC result of a specified channel from a MCP3208.
+int16_t ReadMcp3208Adc(uint8_t chipId, uint8_t channel) {
+  SelectChip(chipId);
+  // MCP3208 receives only 5 bits for start.
+  // Since the SPI library only supports bytewise tramsmission,
+  // we send dummy (high-level) bits before the start bit.
+  // Send data :
+  // 3 dummy bits (000)
+  // start bit (1)
+  // select single-end (1)
+  // 3 address bits: d2, d1, d0
+  SPI.transfer(0x18 | channel);
+  uint16_t b0 = SPI.transfer(0x00);
+  uint16_t b1 = SPI.transfer(0x00);
+  DeselectChips();
+  // The first output bit is high-Z (sampling period).
+  // The second bit is always 0.
+  // Then the ADC value follows in MSB first format.
+  // Therefore the first received byte contains 6 bits from MSB,
+  // and the second byte contains the remainder.
+  return ((b0 & 0x3f) << 6) | ((b1 & 0xfc) >> 2);
+}
+
+void ReadSwitches(bool* button) {
+  for (size_t i = 0; i < 12; i++) {
+    button[i] = (digitalRead(kButtonPins[i]) == LOW);
+  }
+}
+
+void ReadVolumes(uint16_t* data) {
+  byte inByte = 0;
+  for (uint8_t j = 0; j < kNumAdcIc; j++) {
+    for (uint8_t i = 0; i < 8; i++) {
+      data[j * 8 + i] = ReadMcp3208Adc(j, i);
+    }
+  }
+}
+
+// Passes through any serial input to the output.
+// This mode can be used to configure RN-42 using serial terminal
+// connected to Arduino.
+void EchoBackMode() {
+  while (true) {
+    if (Serial.available()) {
+      Serial.print((char)Serial.read());
+    }
+  }
+}
+
+void loop() {
+  if (Serial.available() && Serial.read() == '!') {
+    EchoBackMode();
+  }
+
+  SensorData keys;
+  ReadVolumes(keys.axes);
+  ReadSwitches(keys.button);
+  int nOutputs;
+  const char* outputs[COLS];
+  keyboard.ProcessSensorData(keys, COLS, outputs, &nOutputs);
+  for (size_t i = 0; i < nOutputs; i++) {
+    Serial.print(outputs[i]);
+  }
+}
+