upm/examples/javascript/aeotecsdg2.js

117 lines
3.1 KiB
JavaScript
Raw Permalink Normal View History

ozw: Rework and add some device specific drivers and examples. This commit reworks ozw somewhat and adds some device specific drivers with examples. All of these drivers are kept in the UPM ozw library. The OZW class has been reworked to make it a proper singleton, since the OpenZWave::Manager() it depends on is already a singleton. This avoids issues such as opening and initializing OpenZWave multiple times. A new, relatively thin base class, ozwInterface is also now present. This class wraps some basic functionality, and handles initialization of the OZW base class. It is intended to be inherited by device driver classes. It operates on a node id for a device. Each OZW device is referenced by a node id, which does not change unless the device is removed (and possibly re-added) to a Z-Wave network. Finally, a series of device specific drivers have been implemented. These provide basic functionality to monitor and in some cases control the operation of a Z-Wave device. They are the following: ozwdump - This is a fake 'device' driver that initializes an OZW network and dumps information on all of the nodes (devices) present. Along with each node, available information on each valueid associated with that node is also printed. This fake device and it's examples replace the original ozw example. aeotecss6 - Aeotec Smart Switch 6. This device allows control of the switch, as well as reporting of information the switch makes available, such as current consumption, volts, watts, and accumulated energy use (kWh). aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the Smart Switch 6, but also provides dimming functionality. It also provides information on energy use. aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a magnetic switch with an embedded tamper switch used to detect the opening/closing of windows and doors. This is a battery powered device. aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended to be installed at the MAINS or Breaker box. It reports current and cumulative energy consumption. tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat with Z-Wave functionality. The variant tested was the TZEMT400BB32MAA. The driver reports various information on the status of the thermostat, as well as the current measured temperature. Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
/*
* Author: Jon Trulson <jtrulson@ics.com>
* Copyright (c) 2016 Intel Corporation.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
var sensorObj = require('jsupm_ozw');
function sleepFor(millis)
{
var now = new Date().getTime();
while(new Date().getTime() < now + millis)
{
/* do nothing */
}
}
/************** Main code **************/
var defaultDev = "/dev/ttyACM0";
// if an argument was specified, use it as the device instead
if (process.argv.length > 2)
{
defaultDev = process.argv[2];
}
console.log("Using device " + defaultDev);
// Instantiate an Aeotec Smart Dimmer Gen2 instance, on device node
// 9. You will almost certainly need to change this to reflect your
// own network. Use the ozwdump example to see what nodes are
// available.
var sensor = new sensorObj.AeotecSDG2(9);
// The first thing to do is create options, then lock them when done.
sensor.optionsCreate();
sensor.optionsLock();
// Next, initialize it.
console.log("Initializing, this may take awhile depending on your ZWave network");
sensor.init(defaultDev);
console.log("Initialization complete");
// turn light on
console.log("Turning switch on, then sleeping for 5 secs");
sensor.on();
sleepFor(5000);
console.log("Querying data...");
var dim = false;
setInterval(function()
{
// put on a light show...
if (dim)
sensor.setLevel(25);
else
sensor.on();
dim = !dim;
sensor.update();
console.log("Current Level: "
+ sensor.getLevel());
console.log("Volts: "
+ sensor.getVolts()
+ " volts");
console.log("Energy Consumption: "
+ sensor.getEnergy()
+ " kWh");
console.log("Watts: "
+ sensor.getWatts());
console.log("Current: "
+ sensor.getCurrent()
+ " amps");
console.log();
}, 5000);
// exit on ^C
process.on('SIGINT', function()
{
console.log("Turning switch off and sleeping for 5 seconds...");
sensor.off();
sleepFor(5000);
sensor = null;
sensorObj.cleanUp();
sensorObj = null;
console.log("Exiting.");
process.exit(0);
});