2015-10-23 18:00:33 -06:00
|
|
|
/*
|
|
|
|
* Author: Jon Trulson <jtrulson@ics.com>
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
* Copyright (c) 2015-2016 Intel Corporation.
|
2015-10-23 18:00:33 -06:00
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining
|
|
|
|
* a copy of this software and associated documentation files (the
|
|
|
|
* "Software"), to deal in the Software without restriction, including
|
|
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
* distribute, sublicense, and/or sell copies of the Software, and to
|
|
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
* the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be
|
|
|
|
* included in all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
|
|
|
|
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
|
|
|
|
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
|
|
|
|
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <string>
|
2016-07-07 17:43:21 -06:00
|
|
|
#include <cinttypes>
|
|
|
|
|
2016-04-25 14:27:51 -07:00
|
|
|
#include "zwNode.hpp"
|
2015-10-23 18:00:33 -06:00
|
|
|
|
|
|
|
#include "Node.h"
|
|
|
|
|
|
|
|
using namespace upm;
|
|
|
|
using namespace std;
|
|
|
|
using namespace OpenZWave;
|
|
|
|
|
|
|
|
zwNode::zwNode(uint32_t homeId, uint8_t nodeId)
|
|
|
|
{
|
|
|
|
m_homeId = homeId;
|
|
|
|
m_nodeId = nodeId;
|
|
|
|
|
|
|
|
m_vindex = 0;
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
m_list.clear();
|
|
|
|
m_values.clear();
|
|
|
|
m_autoUpdate = false;
|
2015-10-23 18:00:33 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
zwNode::~zwNode()
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
uint8_t zwNode::nodeId()
|
|
|
|
{
|
|
|
|
return m_nodeId;
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t zwNode::homeId()
|
|
|
|
{
|
|
|
|
return m_homeId;
|
|
|
|
}
|
|
|
|
|
|
|
|
void zwNode::addValueID(ValueID vid)
|
|
|
|
{
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
m_list.push_back(vid);
|
|
|
|
|
|
|
|
if (m_autoUpdate)
|
|
|
|
updateVIDMap();
|
2015-10-23 18:00:33 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
void zwNode::removeValueID(ValueID vid)
|
|
|
|
{
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
m_list.remove(vid);
|
|
|
|
|
|
|
|
if (m_autoUpdate)
|
|
|
|
updateVIDMap();
|
|
|
|
}
|
|
|
|
|
|
|
|
void zwNode::updateVIDMap()
|
|
|
|
{
|
|
|
|
m_values.clear();
|
|
|
|
m_vindex = 0;
|
|
|
|
|
|
|
|
m_list.sort();
|
|
|
|
|
|
|
|
for (auto it = m_list.cbegin(); it != m_list.cend(); ++it)
|
2015-10-23 18:00:33 -06:00
|
|
|
{
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
// We need to use insert since ValueID's default ctor is private
|
|
|
|
m_values.insert(std::pair<int, ValueID>(m_vindex++, *it));
|
2015-10-23 18:00:33 -06:00
|
|
|
}
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
|
2015-10-23 18:00:33 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
bool zwNode::indexToValueID(int index, ValueID *vid)
|
|
|
|
{
|
|
|
|
valueMap_t::iterator it;
|
|
|
|
|
|
|
|
it = m_values.find(index);
|
|
|
|
|
|
|
|
if (it == m_values.end())
|
|
|
|
{
|
|
|
|
// not found, return false
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
*vid = (*it).second;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
void zwNode::dumpNode(bool all)
|
|
|
|
{
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
for (auto it = m_values.cbegin();
|
|
|
|
it != m_values.cend(); ++it)
|
2015-10-23 18:00:33 -06:00
|
|
|
{
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
int vindex = it->first;
|
|
|
|
ValueID vid = it->second;
|
2015-10-23 18:00:33 -06:00
|
|
|
string label = Manager::Get()->GetValueLabel(vid);
|
|
|
|
string valueAsStr;
|
|
|
|
Manager::Get()->GetValueAsString(vid, &valueAsStr);
|
|
|
|
string valueUnits = Manager::Get()->GetValueUnits(vid);
|
|
|
|
ValueID::ValueType vType = vid.GetType();
|
|
|
|
string vTypeStr;
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
string perms;
|
|
|
|
|
|
|
|
if (Manager::Get()->IsValueWriteOnly(vid))
|
|
|
|
perms = "WO";
|
|
|
|
else if (Manager::Get()->IsValueReadOnly(vid))
|
|
|
|
perms = "RO";
|
|
|
|
else
|
|
|
|
perms = "RW";
|
2015-10-23 18:00:33 -06:00
|
|
|
|
|
|
|
switch (vType)
|
|
|
|
{
|
|
|
|
case ValueID::ValueType_Bool:
|
|
|
|
vTypeStr = "bool";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Byte:
|
|
|
|
vTypeStr = "byte";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Decimal:
|
|
|
|
vTypeStr = "float";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Int:
|
|
|
|
vTypeStr = "int32";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_List:
|
|
|
|
vTypeStr = "list";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Schedule:
|
|
|
|
vTypeStr = "schedule";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Short:
|
|
|
|
vTypeStr = "int16";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_String:
|
|
|
|
vTypeStr = "string";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Button:
|
|
|
|
vTypeStr = "button";
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ValueID::ValueType_Raw:
|
|
|
|
vTypeStr = "raw";
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
vTypeStr = "undefined";
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
// by default we only want user values, unless 'all' is true
|
|
|
|
if (all || (vid.GetGenre() == ValueID::ValueGenre_User))
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
{
|
|
|
|
fprintf(stderr, "\t Index: %d, Type: %s, Label: %s, Value: %s %s (%s)\n",
|
2015-10-23 18:00:33 -06:00
|
|
|
vindex,
|
|
|
|
vTypeStr.c_str(),
|
|
|
|
label.c_str(),
|
|
|
|
valueAsStr.c_str(),
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
valueUnits.c_str(),
|
|
|
|
perms.c_str());
|
|
|
|
|
2016-10-13 12:18:52 -07:00
|
|
|
fprintf(stderr, "\t\t VID: %016llx\n",
|
ozw: Rework and add some device specific drivers and examples.
This commit reworks ozw somewhat and adds some device specific drivers
with examples. All of these drivers are kept in the UPM ozw library.
The OZW class has been reworked to make it a proper singleton, since
the OpenZWave::Manager() it depends on is already a singleton. This
avoids issues such as opening and initializing OpenZWave multiple
times.
A new, relatively thin base class, ozwInterface is also now present.
This class wraps some basic functionality, and handles initialization
of the OZW base class. It is intended to be inherited by device
driver classes. It operates on a node id for a device. Each OZW
device is referenced by a node id, which does not change unless the
device is removed (and possibly re-added) to a Z-Wave network.
Finally, a series of device specific drivers have been implemented.
These provide basic functionality to monitor and in some cases control
the operation of a Z-Wave device. They are the following:
ozwdump - This is a fake 'device' driver that initializes an OZW
network and dumps information on all of the nodes (devices) present.
Along with each node, available information on each valueid associated
with that node is also printed. This fake device and it's examples
replace the original ozw example.
aeotecss6 - Aeotec Smart Switch 6. This device allows control of the
switch, as well as reporting of information the switch makes
available, such as current consumption, volts, watts, and accumulated
energy use (kWh).
aeotecsdg2 - Aeotec Smart Dimmer Gen 2. This device is similar to the
Smart Switch 6, but also provides dimming functionality. It also
provides information on energy use.
aeotecdw2e - Aeotec Door/Window Sensor 2nd Edition. This device is a
magnetic switch with an embedded tamper switch used to detect the
opening/closing of windows and doors. This is a battery powered
device.
aeotecdsb09104 - Aeotec Home Energy Monitor. This device is intended
to be installed at the MAINS or Breaker box. It reports current and
cumulative energy consumption.
tzemt400 - Trane TZEMT400 Thermostat. This device is a thermostat
with Z-Wave functionality. The variant tested was the
TZEMT400BB32MAA. The driver reports various information on the status
of the thermostat, as well as the current measured temperature.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-07-06 13:25:39 -06:00
|
|
|
vid.GetId());
|
|
|
|
}
|
2015-10-23 18:00:33 -06:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|