mhz16: Initial implementation

This library implements support for the MHZ16 CO2 sensor.

Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Zion Orent <zorent@ics.com>
Signed-off-by: John Van Drasek <john.r.van.drasek@intel.com>

examples/python/apds9002.py

@@ -0,0 +1,50 @@
+#!/usr/bin/python
+# Author: Zion Orent <zorent@ics.com>
+# Copyright (c) 2015 Intel Corporation.
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+import time, sys, signal, atexit
+import pyupm_apds9002 as upmApds9002
+
+# Instantiate a Grove Luminance sensor on analog pin A0
+myLuminance = upmApds9002.APDS9002(0)
+
+
+## Exit handlers ##
+# This stops python from printing a stacktrace when you hit control-C
+def SIGINTHandler(signum, frame):
+	raise SystemExit
+
+# This lets you run code on exit, including functions from myLuminance
+def exitHandler():
+	print "Exiting"
+	sys.exit(0)
+
+# Register exit handlers
+atexit.register(exitHandler)
+signal.signal(signal.SIGINT, SIGINTHandler)
+
+
+while(1):
+	print "Luminance value is {0}".format(
+	myLuminance.value())
+
+	time.sleep(1)

examples/python/mhz16.py

@@ -0,0 +1,71 @@
+#!/usr/bin/python
+# Author: Zion Orent <zorent@ics.com>
+# Copyright (c) 2015 Intel Corporation.
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+import time, sys, signal, atexit
+import pyupm_mhz16 as upmMhz16
+
+# Instantiate a MHZ16 serial CO2 sensor on uart 0.
+# This example was tested on the Grove CO2 sensor module.
+myCO2 = upmMhz16.MHZ16(0)
+
+
+## Exit handlers ##
+# This stops python from printing a stacktrace when you hit control-C
+def SIGINTHandler(signum, frame):
+	raise SystemExit
+
+# This function lets you run code on exit,
+# including functions from myCO2
+def exitHandler():
+	print "Exiting"
+	sys.exit(0)
+
+# Register exit handlers
+atexit.register(exitHandler)
+signal.signal(signal.SIGINT, SIGINTHandler)
+
+
+# make sure port is initialized properly.  9600 baud is the default.
+if (not myCO2.setupTty(upmMhz16.cvar.int_B9600)):
+	print "Failed to setup tty port parameters"
+	sys.exit(0)
+
+print ("Make sure that the sensor has had "
+"at least 3 minutes to warm up\n"
+"or you will not get valid results.\n"
+"The temperature reported is not the ambient temperature,\n"
+"but rather the temperature of the sensor elements.")
+
+gas = upmMhz16.new_intp()
+temp = upmMhz16.new_intp()
+
+time.sleep(1)
+
+while(1):
+	myCO2.getData(gas, temp)
+	outputStr = ("CO2 concentration: {0} PPM, "
+	"Temperature (in C): {1}".format(
+	upmMhz16.intp_value(gas), upmMhz16.intp_value(temp)))
+	print outputStr
+
+	time.sleep(2)

examples/python/waterlevel.py

@@ -0,0 +1,54 @@
+#!/usr/bin/python
+# Author: Zion Orent <zorent@ics.com>
+# Copyright (c) 2015 Intel Corporation.
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+import time, sys, signal, atexit
+import pyupm_waterlevel as upmWaterlevel
+
+# The was tested with the Water Level Sensor
+# Instantiate a Water Level Sensor on digital pin D2
+myWaterLevel = upmWaterlevel.WaterLevel(2)
+
+
+## Exit handlers ##
+# This stops python from printing a stacktrace when you hit control-C
+def SIGINTHandler(signum, frame):
+	raise SystemExit
+
+# This function lets you run code on exit,
+# including functions from myWaterLevel
+def exitHandler():
+	print "Exiting"
+	sys.exit(0)
+
+# Register exit handlers
+atexit.register(exitHandler)
+signal.signal(signal.SIGINT, SIGINTHandler)
+
+
+while(1):
+	if (myWaterLevel.isSubmerged()):
+		print "Sensor is submerged in liquid"
+	else:
+		print "Liquid is below water level sensor"
+
+	time.sleep(1)