bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation

This module (bmx055) implements support for the following core Bosch
chipsets:

bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope

The other 3 devices are combinations of the above:

bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro

...for 6 devices total.

For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.

The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.

These devices support both I2C and SPI communications.  They must be
powered at 3.3vdc.

Signed-off-by: Jon Trulson <jtrulson@ics.com>

examples/c++/CMakeLists.txt

@@ -269,6 +269,7 @@ add_example (ds18b20)
 add_example (bmp280)
 add_example (bno055)
 add_example (l3gd20)
+add_example (bmx055)
 
 # These are special cases where you specify example binary, source file and module(s)
 include_directories (${PROJECT_SOURCE_DIR}/src)
@@ -295,3 +296,8 @@ add_custom_example (adc-example adc-sensor.cxx "ads1x15")
 add_custom_example (light-sensor-example light-sensor.cxx "si1132;max44009")
 add_custom_example (light-controller-example light-controller.cxx "lp8860;ds1808lc;hlg150h")
 add_custom_example (bme280-example bme280.cxx bmp280)
+add_custom_example (bma250e-example bma250e.cxx bmx055)
+add_custom_example (bmg160-example bmg160.cxx bmx055)
+add_custom_example (bmm150-example bmm150.cxx bmx055)
+add_custom_example (bmc150-example bmc150.cxx bmx055)
+add_custom_example (bmi055-example bmi055.cxx bmx055)

examples/c++/bma250e.cxx

@@ -0,0 +1,83 @@
+/*
+ * Author: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2016 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <iostream>
+#include <signal.h>
+#include "bma250e.hpp"
+
+using namespace std;
+
+int shouldRun = true;
+
+void sig_handler(int signo)
+{
+  if (signo == SIGINT)
+    shouldRun = false;
+}
+
+
+int main(int argc, char **argv)
+{
+  signal(SIGINT, sig_handler);
+//! [Interesting]
+
+  // Instantiate an BMA250E using default I2C parameters
+  upm::BMA250E *sensor = new upm::BMA250E();
+
+  // For SPI, bus 0, you would pass -1 as the address, and a valid pin
+  // for CS: BMA250E(0, -1, 10);
+
+  // now output data every 250 milliseconds
+  while (shouldRun)
+    {
+      float x, y, z;
+
+      sensor->update();
+
+      sensor->getAccelerometer(&x, &y, &z);
+      cout << "Accelerometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " g"
+           << endl;
+
+      // we show both C and F for temperature
+      cout << "Compensation Temperature: " << sensor->getTemperature()
+           << " C / " << sensor->getTemperature(true) << " F"
+           << endl;
+
+      cout << endl;
+
+      usleep(250000);
+    }
+
+//! [Interesting]
+
+  cout << "Exiting..." << endl;
+
+  delete sensor;
+
+  return 0;
+}

examples/c++/bmc150.cxx

@@ -0,0 +1,82 @@
+/*
+ * Author: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2016 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <iostream>
+#include <signal.h>
+#include "bmc150.hpp"
+
+using namespace std;
+
+int shouldRun = true;
+
+void sig_handler(int signo)
+{
+  if (signo == SIGINT)
+    shouldRun = false;
+}
+
+
+int main(int argc, char **argv)
+{
+  signal(SIGINT, sig_handler);
+//! [Interesting]
+
+  // Instantiate an BMC150 using default I2C parameters
+  upm::BMC150 *sensor = new upm::BMC150();
+
+  // now output data every 250 milliseconds
+  while (shouldRun)
+    {
+      float x, y, z;
+
+      sensor->update();
+
+      sensor->getAccelerometer(&x, &y, &z);
+      cout << "Accelerometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " g"
+           << endl;
+
+      sensor->getMagnetometer(&x, &y, &z);
+      cout << "Magnetometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " uT"
+           << endl;
+
+      cout << endl;
+
+      usleep(250000);
+    }
+
+//! [Interesting]
+
+  cout << "Exiting..." << endl;
+
+  delete sensor;
+
+  return 0;
+}

examples/c++/bmg160.cxx

@@ -0,0 +1,83 @@
+/*
+ * Author: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2016 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <iostream>
+#include <signal.h>
+#include "bmg160.hpp"
+
+using namespace std;
+
+int shouldRun = true;
+
+void sig_handler(int signo)
+{
+  if (signo == SIGINT)
+    shouldRun = false;
+}
+
+
+int main(int argc, char **argv)
+{
+  signal(SIGINT, sig_handler);
+//! [Interesting]
+
+  // Instantiate an BMG160 using default I2C parameters
+  upm::BMG160 *sensor = new upm::BMG160();
+
+  // For SPI, bus 0, you would pass -1 as the address, and a valid pin
+  // for CS: BMG160(0, -1, 10);
+
+  // now output data every 250 milliseconds
+  while (shouldRun)
+    {
+      float x, y, z;
+
+      sensor->update();
+
+      sensor->getGyroscope(&x, &y, &z);
+      cout << "Gyroscope x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " degrees/s"
+           << endl;
+
+      // we show both C and F for temperature
+      cout << "Compensation Temperature: " << sensor->getTemperature()
+           << " C / " << sensor->getTemperature(true) << " F"
+           << endl;
+
+      cout << endl;
+
+      usleep(250000);
+    }
+
+//! [Interesting]
+
+  cout << "Exiting..." << endl;
+
+  delete sensor;
+
+  return 0;
+}

examples/c++/bmi055.cxx

@@ -0,0 +1,82 @@
+/*
+ * Author: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2016 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <iostream>
+#include <signal.h>
+#include "bmi055.hpp"
+
+using namespace std;
+
+int shouldRun = true;
+
+void sig_handler(int signo)
+{
+  if (signo == SIGINT)
+    shouldRun = false;
+}
+
+
+int main(int argc, char **argv)
+{
+  signal(SIGINT, sig_handler);
+//! [Interesting]
+
+  // Instantiate an BMI055 using default I2C parameters
+  upm::BMI055 *sensor = new upm::BMI055();
+
+  // now output data every 250 milliseconds
+  while (shouldRun)
+    {
+      float x, y, z;
+
+      sensor->update();
+
+      sensor->getAccelerometer(&x, &y, &z);
+      cout << "Accelerometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " g"
+           << endl;
+
+      sensor->getGyroscope(&x, &y, &z);
+      cout << "Gyroscope x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " degrees/s"
+           << endl;
+
+      cout << endl;
+
+      usleep(250000);
+    }
+
+//! [Interesting]
+
+  cout << "Exiting..." << endl;
+
+  delete sensor;
+
+  return 0;
+}

examples/c++/bmm150.cxx

@@ -0,0 +1,78 @@
+/*
+ * Author: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2016 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <iostream>
+#include <signal.h>
+#include "bmm150.hpp"
+
+using namespace std;
+
+int shouldRun = true;
+
+void sig_handler(int signo)
+{
+  if (signo == SIGINT)
+    shouldRun = false;
+}
+
+
+int main(int argc, char **argv)
+{
+  signal(SIGINT, sig_handler);
+//! [Interesting]
+
+  // Instantiate an BMM150 using default I2C parameters
+  upm::BMM150 *sensor = new upm::BMM150();
+
+  // For SPI, bus 0, you would pass -1 as the address, and a valid pin
+  // for CS: BMM150(0, -1, 10);
+
+  // now output data every 250 milliseconds
+  while (shouldRun)
+    {
+      float x, y, z;
+
+      sensor->update();
+
+      sensor->getMagnetometer(&x, &y, &z);
+      cout << "Magnetometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " uT"
+           << endl;
+
+      cout << endl;
+
+      usleep(250000);
+    }
+
+//! [Interesting]
+
+  cout << "Exiting..." << endl;
+
+  delete sensor;
+
+  return 0;
+}

examples/c++/bmx055.cxx

@@ -0,0 +1,89 @@
+/*
+ * Author: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2016 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <unistd.h>
+#include <iostream>
+#include <signal.h>
+#include "bmx055.hpp"
+
+using namespace std;
+
+int shouldRun = true;
+
+void sig_handler(int signo)
+{
+  if (signo == SIGINT)
+    shouldRun = false;
+}
+
+
+int main(int argc, char **argv)
+{
+  signal(SIGINT, sig_handler);
+//! [Interesting]
+
+  // Instantiate an BMX055 using default I2C parameters
+  upm::BMX055 *sensor = new upm::BMX055();
+
+  // now output data every 250 milliseconds
+  while (shouldRun)
+    {
+      float x, y, z;
+
+      sensor->update();
+
+      sensor->getAccelerometer(&x, &y, &z);
+      cout << "Accelerometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " g"
+           << endl;
+
+      sensor->getGyroscope(&x, &y, &z);
+      cout << "Gyroscope x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " degrees/s"
+           << endl;
+
+      sensor->getMagnetometer(&x, &y, &z);
+      cout << "Magnetometer x: " << x
+           << " y: " << y
+           << " z: " << z
+           << " uT"
+           << endl;
+
+      cout << endl;
+
+      usleep(250000);
+    }
+
+//! [Interesting]
+
+  cout << "Exiting..." << endl;
+
+  delete sensor;
+
+  return 0;
+}