mirror of
https://github.com/eclipse/upm.git
synced 2025-07-02 09:51:14 +03:00
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch chipsets: bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa) bmm150 - magnetometer bmg160 - gyroscope The other 3 devices are combinations of the above: bmx055 - accel/gyro/mag bmc160 - accel/mag bmi055 - accel/gyro ...for 6 devices total. For the combination devices, all of the sub-devices appear as individual independent devices on the I2C/SPI bus. The combination drivers provide basic configuration and data output. For more detailed control as well as interrupt support, you should use the core device drivers (accel/gyro/mag) directly. These devices support both I2C and SPI communications. They must be powered at 3.3vdc. Signed-off-by: Jon Trulson <jtrulson@ics.com>
This commit is contained in:
@ -128,6 +128,7 @@ endif()
|
||||
add_example(VCAP_Example vcap)
|
||||
add_example(BMP280_Example bmp280)
|
||||
add_example(BNO055_Example bno055)
|
||||
add_example(BMX055_Example bmx055)
|
||||
|
||||
add_example_with_path(Jhd1313m1_lcdSample lcd i2clcd)
|
||||
add_example_with_path(Jhd1313m1Sample lcd i2clcd)
|
||||
@ -136,4 +137,9 @@ add_example_with_path(Lcm1602_parallelSample lcd i2clcd)
|
||||
add_example_with_path(SSD1308_oledSample lcd i2clcd)
|
||||
add_example_with_path(SSD1327_oledSample lcd i2clcd)
|
||||
add_example_with_path(BME280_Example bmp280 bmp280)
|
||||
add_example_with_path(BMA250E_Example bmx055 bmx055)
|
||||
add_example_with_path(BMG160_Example bmx055 bmx055)
|
||||
add_example_with_path(BMM150_Example bmx055 bmx055)
|
||||
add_example_with_path(BMC150_Example bmx055 bmx055)
|
||||
add_example_with_path(BMI055_Example bmx055 bmx055)
|
||||
|
||||
|
Reference in New Issue
Block a user