spelling: correct many misspellings of celsius

Signed-off-by: Jon Trulson <jtrulson@ics.com>

docs/apichanges.md

@@ -4,6 +4,10 @@ API Changes                       {#apichanges}
 Here's a list of other API changes made to the library that break source/binary
 compatibility between releases:
 
+ * There were frequent misspellings of the word *Celsius* in the UPM
+ code.  In some cases, these were in method names, which will cause
+ some API compatibility issues.  These have all been corrected for UPM
+ versions after v.0.7.2.
  * Our **C++ header files** changed their extension from *.h* to *.hpp* in
  version 0.7.0, Intel provided examples and code samples also reflect this
  change but you will need to modify your `#include` directives in existing code
@@ -12,4 +16,3 @@ compatibility between releases:
  * **stepmotor** driver API was changed significantly from v.0.4.1 to v.0.5.0
  * **eboled** library was greatly improved in version 0.4.0 and the `draw()`
  function was removed in favor of a more complete GFX library implementation
- 

examples/c++/hp20x.cxx

@@ -53,7 +53,7 @@ int main(int argc, char **argv)
   // Output data every second until interrupted
   while (shouldRun)
     {
-      printf("Temperature: %f Celcius\n", bar->getTemperature());
+      printf("Temperature: %f Celsius\n", bar->getTemperature());
       printf("Pressure:    %f Millibars\n", bar->getPressure());
       printf("Altitude:    %f Meters\n", bar->getAltitude());
 

examples/c++/mcp9808.cxx

@@ -18,7 +18,7 @@ int main()
 		cout << "1 - read temp \t" ;
 		cout << "2 - sleep mode \t";
 		cout << "3 - wake up" << endl;
-		cout << "4 - set mode to " << (temp->isCelsius() == true ? "Fahrenheit" : "Celcius") << endl;
+		cout << "4 - set mode to " << (temp->isCelsius() == true ? "Fahrenheit" : "Celsius") << endl;
 		cout << "5 - show status bits" << endl;
 		cout << "6 - Set Tcrit \t" ;
 		cout << "7 - Set Tupper \t" ;
@@ -53,7 +53,7 @@ int main()
 			temp->shutDown(false);
 			break;
 		case 4:
-			cout << "set mode to " << (temp->isCelsius() ? "Fahrenheit" : "Celcius") << endl;
+			cout << "set mode to " << (temp->isCelsius() ? "Fahrenheit" : "Celsius") << endl;
 			temp->setMode(!temp->isCelsius());
 			break;
 		case 5:

examples/c++/si7005.cxx

@@ -35,7 +35,7 @@ int main ()
    try {
       upm::SI7005* sensor = new upm::SI7005(EDISON_I2C_BUS, EDISON_GPIO_SI7005_CS);
       while (true) {
-         int temperature = sensor->getTemperatureCelcius();
+         int temperature = sensor->getTemperatureCelsius();
          int humidity = sensor->getHumidityRelative();
          std::cout << "Temperature = " << temperature << "C" << std::endl;
          std::cout << "Humidity    = " << humidity << "%" << std::endl;

examples/c++/temperature-sensor.cxx

@@ -76,7 +76,7 @@ int main ()
    std::cout << "Temperature sensor " << temperatureSensor->getModuleName() << " detected" << std::endl;
    while (true) {
       try {
-         int value = temperatureSensor->getTemperatureCelcius();
+         int value = temperatureSensor->getTemperatureCelsius();
          std::cout << "Temperature = " << value << "C" << std::endl;
       } catch (std::exception& e) {
          std::cerr << e.what() << std::endl;

examples/javascript/hp20x.js

@@ -37,7 +37,7 @@ bar.init();
 // Output data every second until interrupted
 setInterval(function()
 {
-    console.log("Temperature: " + bar.getTemperature() + " Celcius");
+    console.log("Temperature: " + bar.getTemperature() + " Celsius");
     console.log("Pressure:    " + bar.getPressure() + " Millibars");
     console.log("Altitude:    " + bar.getAltitude() + " Meters");
     console.log("");

examples/python/hp20x.py

@@ -46,7 +46,7 @@ bar = barometerObj.HP20X()
 bar.init()
 
 while(1):
-    print "Temperature:", bar.getTemperature(), "Celcius"
+    print "Temperature:", bar.getTemperature(), "Celsius"
     print "Pressure:   ", bar.getPressure(), "Millibars"
     print "Altitude:   ", bar.getAltitude(), "Meters"
     print 

src/adis16448/adis16448.cxx

@@ -212,10 +212,10 @@ float ADIS16448::gyroScale(int16_t sensorData)
 }
 /////////////////////////////////////////////////////////////////////////////////////////////
 // Converts temperature data output from the sensorRead() function and returns temperature
-// in degrees Celcius
+// in degrees Celsius
 /////////////////////////////////////////////////////////////////////////////////////////////
 // sensorData - data output from sensorRead()
-// return - (float) signed/scaled temperature in degrees Celcius
+// return - (float) signed/scaled temperature in degrees Celsius
 /////////////////////////////////////////////////////////////////////////////////////////
 float ADIS16448::tempScale(int16_t sensorData)
 {
@@ -226,7 +226,7 @@ float ADIS16448::tempScale(int16_t sensorData)
 // Converts barometer data output from sensorRead() function and returns pressure in bar
 /////////////////////////////////////////////////////////////////////////////////////////////
 // sensorData - data output from sensorRead()
-// return - (float) signed/scaled temperature in degrees Celcius
+// return - (float) signed/scaled temperature in degrees Celsius
 /////////////////////////////////////////////////////////////////////////////////////////
 float ADIS16448::pressureScale(int16_t sensorData)
 {
@@ -238,7 +238,7 @@ float ADIS16448::pressureScale(int16_t sensorData)
 // reading in Gauss
 /////////////////////////////////////////////////////////////////////////////////////////////
 // sensorData - data output from sensorRead()
-// return - (float) signed/scaled temperature in degrees Celcius
+// return - (float) signed/scaled temperature in degrees Celsius
 /////////////////////////////////////////////////////////////////////////////////////////
 float ADIS16448::magnetometerScale(int16_t sensorData)
 {

src/adxrs610/adxrs610.hpp

@@ -138,7 +138,7 @@ namespace upm {
     float getZeroPoint() { return m_zeroPoint; };
 
     /**
-     * Return the measured temperature in Celcius.  Note, the
+     * Return the measured temperature in Celsius.  Note, the
      * datasheet says that this value is very repeatable, but is not
      * an accurate absolute temperature.
      *

src/bmp280/bmp280.cxx

@@ -40,7 +40,7 @@ using namespace std;
 
 // #define BMP280_USE_TEST_DATA
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {

src/bmp280/bmp280.hpp

@@ -304,8 +304,8 @@ namespace upm {
      * to calling this method.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The temperature in degrees Celcius or Fahrenheit.
+     * @return The temperature in degrees Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -393,7 +393,7 @@ namespace upm {
       return "BMP280";
     };
 
-    int getTemperatureCelcius()
+    int getTemperatureCelsius()
     {
       return int(getTemperature(false));
     };

src/bmpx8x/bmpx8x.cxx

@@ -172,7 +172,7 @@ BMPX8X::getAltitude (float sealevelPressure) {
 
 
 int
-BMPX8X::getTemperatureCelcius() {
+BMPX8X::getTemperatureCelsius() {
     return static_cast<int>(getTemperature() + 0.5);
 }
 

src/bmpx8x/bmpx8x.hpp

@@ -144,10 +144,10 @@ class BMPX8X : public IPressureSensor, public ITemperatureSensor {
         float getAltitude (float sealevelPressure = 101325);
 
         /**
-         * Return latest calculated temperature value in Celcius
+         * Return latest calculated temperature value in Celsius
          * See ITemperatureSensor
          */
-        int getTemperatureCelcius();
+        int getTemperatureCelsius();
 
         /**
          * Return latest calculated pressure value in Pascals

src/bmx055/bma250e.cxx

@@ -33,7 +33,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/bmx055/bma250e.hpp

@@ -1014,8 +1014,8 @@ namespace upm {
      * calling this method.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The temperature in degrees Celcius or Fahrenheit.
+     * @return The temperature in degrees Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 

src/bmx055/bmg160.cxx

@@ -35,7 +35,7 @@ using namespace std;
 
 #define BMG160_DEFAULT_CHIPID 0x0f
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/bmx055/bmg160.hpp

@@ -873,8 +873,8 @@ namespace upm {
      * calling this method.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The temperature in degrees Celcius or Fahrenheit.
+     * @return The temperature in degrees Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 

src/bno055/bno055.cxx

@@ -33,7 +33,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {
@@ -245,20 +245,20 @@ void BNO055::setTemperatureSource(TEMP_SOURCES_T src)
   writeReg(REG_TEMP_SOURCE, src);
 }
 
-void BNO055::setTemperatureUnits(bool celcius)
+void BNO055::setTemperatureUnits(bool celsius)
 {
   setPage(0);
 
   uint8_t reg = readReg(REG_UNIT_SEL);
 
-  if (celcius)
+  if (celsius)
     reg &= ~UNIT_SEL_TEMP_UNIT;
   else
     reg |= UNIT_SEL_TEMP_UNIT;
 
   writeReg(REG_UNIT_SEL, reg);
 
-  m_tempIsC = celcius;
+  m_tempIsC = celsius;
 }
 
 void BNO055::setAccelerometerUnits(bool mg)

src/bno055/bno055.hpp

@@ -896,7 +896,7 @@ namespace upm {
      *
      * By default, the constructor sets the acceleration units to
      * m/s^2, gyro and Euler units to degrees, and temperature to
-     * celcius.  It then enters the NDOF fusion mode.
+     * celsius.  It then enters the NDOF fusion mode.
      *
      * In addition, the internal clock is used so that compatibility
      * with other implementations is assured.  If you are using a
@@ -980,11 +980,11 @@ namespace upm {
 
     /**
      * Select the temperature units.  This can be the Fahrenheit or
-     * Celcius.
+     * Celsius.
      *
-     * @param celcius true for Celius, false for Fahrenheit.
+     * @param celsius true for Celius, false for Fahrenheit.
      */
-    void setTemperatureUnits(bool celcius);
+    void setTemperatureUnits(bool celsius);
 
     /**
      * Set the operating mode for the device.  This places the device
@@ -1060,8 +1060,8 @@ namespace upm {
      * calling this method.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The temperature in degrees Celcius or Fahrenheit.
+     * @return The temperature in degrees Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 

src/cwlsxxa/cwlsxxa.cxx

@@ -33,7 +33,7 @@ using namespace std;
 // several aio reads.
 static const int maxSamples = 50;
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/cwlsxxa/cwlsxxa.hpp

@@ -130,9 +130,9 @@ namespace upm {
      * constructor) then this function will always return 0C/32F.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -174,7 +174,7 @@ namespace upm {
     bool m_hasTemp;
     bool m_hasHum;
 
-    // in Celcius
+    // in Celsius
     float m_temperature;
 
     float m_humidity;

src/ds18b20/ds18b20.cxx

@@ -31,7 +31,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 static float c2f(float c)
 {
   return (c * (9.0 / 5.0) + 32.0);

src/ds18b20/ds18b20.hpp

@@ -153,9 +153,9 @@ namespace upm {
      *
      * @param index The device index to access (starts at 0).
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(int index, bool fahrenheit=false);
 

src/hdxxvxta/hdxxvxta.cxx

@@ -29,7 +29,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/hdxxvxta/hdxxvxta.hpp

@@ -125,9 +125,9 @@ namespace upm {
      * constructor) then this function will always return 0C/32F.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -154,7 +154,7 @@ namespace upm {
     // does this sensor support temperature reporting?
     bool m_hasTemp;
 
-    // in Celcius
+    // in Celsius
     float m_temperature;
 
     float m_humidity;

src/hwxpxx/hwxpxx.cxx

@@ -32,7 +32,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {
@@ -107,9 +107,9 @@ HWXPXX::HWXPXX(std::string device, int address, int baud, int bits, char parity,
 
   // temp scale
   if (coils[0])
-    m_isCelcius = false;
+    m_isCelsius = false;
   else
-    m_isCelcius = true;
+    m_isCelsius = true;
 
   // current override switch status
   m_override = ((coils[1]) ? true : false);
@@ -243,7 +243,7 @@ void HWXPXX::update()
   // temperature, we always store as C
   float tmpF = float((int16_t)data[1]) / 10.0;
 
-  if (m_isCelcius)
+  if (m_isCelsius)
     m_temperature = tmpF;
   else
     m_temperature = f2c(tmpF);
@@ -319,11 +319,11 @@ void HWXPXX::setTemperatureScale(bool fahrenheit)
 {
   writeCoil(COIL_TEMP_SCALE, fahrenheit);
 
-  // now re-read and set m_isCelcius properly
+  // now re-read and set m_isCelsius properly
   if (readCoil(COIL_TEMP_SCALE))
-    m_isCelcius = false;
+    m_isCelsius = false;
   else
-    m_isCelcius = true;
+    m_isCelsius = true;
 }
 
 string HWXPXX::getSlaveID()
@@ -361,11 +361,11 @@ void HWXPXX::setSlaveAddress(int addr)
                                ": modbus_set_slave() failed");
     }
 
-  // now re-read and set m_isCelcius properly
+  // now re-read and set m_isCelsius properly
   if (readCoil(COIL_TEMP_SCALE))
-    m_isCelcius = false;
+    m_isCelsius = false;
   else
-    m_isCelcius = true;
+    m_isCelsius = true;
 }
 
 void HWXPXX::setDebug(bool enable)

src/hwxpxx/hwxpxx.hpp

@@ -124,9 +124,9 @@ namespace upm {
      * the scale the device is operating in natively.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -173,7 +173,7 @@ namespace upm {
     /**
      * Return the current temperature offset stored on the device.
      * This is a value between -50 and +50, specified in tenths of a
-     * degree in whatever scale (Celcius or Fahrenheit) is in use.
+     * degree in whatever scale (Celsius or Fahrenheit) is in use.
      * This offset is applied to the returned temperature reading by the
      * device.
      *
@@ -194,7 +194,7 @@ namespace upm {
     /**
      * Set the stored temperature offset on the device.  This is a
      * value between -50 and +50, specified in tenths of a degree in
-     * what ever scale (Celcius or Fahrenheit) is in use.  This offset
+     * what ever scale (Celsius or Fahrenheit) is in use.  This offset
      * is applied to the returned temperature reading by the device.
      *
      * @param offset Offset in tenths of a degree with a range of -50 to +50
@@ -216,10 +216,10 @@ namespace upm {
      * detects this setting automatically and adjusts itself
      * accordingly, so this is generally never needed.  It is used to
      * set the native reporting scale of the temperature either in
-     * degrees Celcius or Fahrenheit.  Its setting will not affect
+     * degrees Celsius or Fahrenheit.  Its setting will not affect
      * the operation of getTemperature().
      *
-     * @param fahrenheit true to set Fahrenheit, false to set Celcius
+     * @param fahrenheit true to set Fahrenheit, false to set Celsius
      */
     void setTemperatureScale(bool fahrenheit);
 
@@ -269,7 +269,7 @@ namespace upm {
     modbus_t *m_mbContext;
 
     // is the device reporting in C or F?
-    bool m_isCelcius;
+    bool m_isCelsius;
 
   private:
     bool m_debugging;

src/lm35/lm35.hpp

@@ -75,9 +75,9 @@ namespace upm {
     ~LM35();
 
     /**
-     * Returns the temperature in degrees Celcius
+     * Returns the temperature in degrees Celsius
      *
-     * @return The Temperature in degrees Celcius
+     * @return The Temperature in degrees Celsius
      */
     float getTemperature();
 

src/lsm9ds0/lsm9ds0.hpp

@@ -1294,7 +1294,7 @@ namespace upm {
      * the correct value, so I made a 'guess'.  If it's wrong, and you
      * figure it out, send a patch!
      *
-     * @return the temperature value in degrees Celcius
+     * @return the temperature value in degrees Celsius
      */
     float getTemperature();
 

src/mcp9808/mcp9808.hpp

@@ -188,7 +188,7 @@ namespace upm {
              *  setMode - sets temperature reporting mode.
              *
              *  @param celsius. Default is true. If false all
-             *  temps will be reported in fahrenhiet.
+             *  temps will be reported in fahrenheit.
              */
             void setMode(bool celsius = true)
             {

src/mpu9150/mpu60x0.hpp

@@ -820,7 +820,7 @@ namespace upm {
     /**
      * get the temperature value
      *
-     * @return the temperature value in degrees Celcius
+     * @return the temperature value in degrees Celsius
      */
     virtual float getTemperature();
 

src/mpu9150/mpu9250.hpp

@@ -73,7 +73,7 @@ namespace upm {
     /**
      * get the temperature value
      *
-     * @return the temperature value in degrees Celcius
+     * @return the temperature value in degrees Celsius
      */
     float getTemperature();
 

src/ozw/tzemt400.cxx

@@ -31,7 +31,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {

src/ozw/tzemt400.hpp

@@ -74,12 +74,12 @@ namespace upm {
     ~TZEMT400();
 
     /**
-     * Return the current measured temperature in Celcius or
+     * Return the current measured temperature in Celsius or
      * Fahrenheit.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The temperature in degrees Celcius or Fahrenheit.
+     * @return The temperature in degrees Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -100,25 +100,25 @@ namespace upm {
     std::string getOperatingState();
 
     /**
-     * Return the current Heating Point temperature in Celcius or
+     * Return the current Heating Point temperature in Celsius or
      * Fahrenheit.  This is the temperature at which the thermostat
      * will want to engage Heat.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The Heating Point temperature in degrees Celcius or
+     * @return The Heating Point temperature in degrees Celsius or
      * Fahrenheit.
      */
     float getHeatingPointTemperature(bool fahrenheit=false);
 
     /**
-     * Return the current Cooling Point temperature in Celcius or
+     * Return the current Cooling Point temperature in Celsius or
      * Fahrenheit.  This is the temperature at which the thermostat
      * will want to engage Cooling.
      *
      * @param fahrenheit true to return data in Fahrenheit, false for
-     * Celicus.  Celcius is the default.
+     * Celicus.  Celsius is the default.
-     * @return The Cooling Point temperature in degrees Celcius or
+     * @return The Cooling Point temperature in degrees Celsius or
      * Fahrenheit.
      */
     float getCoolingPointTemperature(bool fahrenheit=false);

src/rhusb/rhusb.cxx

@@ -37,7 +37,7 @@ static const int maxBuffer = 1024;
 // baud rate is always 9600
 static const int baudRate = 9600;
 
-// conversion from celcius to fahrenheit 
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/rhusb/rhusb.hpp

@@ -79,9 +79,9 @@ namespace upm {
      * prior to calling this method.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 

src/si7005/si7005.cxx

@@ -95,7 +95,7 @@ SI7005::getTemperatureRaw () {
 }
 
 int
-SI7005::getTemperatureCelcius () {
+SI7005::getTemperatureCelsius () {
     uint16_t rawTemperature = getTemperatureRaw();
     rawTemperature = ((rawTemperature >> 2) & 0xFFFF);
     last_temperature = ((float)rawTemperature) / SI7005_TEMPERATURE_SLOPE - SI7005_TEMPERATURE_OFFSET;

src/si7005/si7005.hpp

@@ -82,7 +82,7 @@ class SI7005 : public ITemperatureSensor, public IHumiditySensor {
         /**
          * Get temperature measurement.
          */
-        int getTemperatureCelcius ();
+        int getTemperatureCelsius ();
 
         /**
          * Get relative humidity measurement.

src/t3311/t3311.cxx

@@ -34,7 +34,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {
@@ -133,9 +133,9 @@ T3311::T3311(std::string device, int address, int baud, int bits, char parity,
   // our temperature data in.
   tmp = readInputReg(REG_UNIT_SETTINGS);
   if (tmp & 0x0001)
-    m_isCelcius = false;
+    m_isCelsius = false;
   else
-    m_isCelcius = true;
+    m_isCelsius = true;
 
   // read in the the FW_LO register (BCD encoded) and convert
   tmp = readInputReg(REG_FW_LO);
@@ -225,7 +225,7 @@ void T3311::update()
 
   // temperature first, we always store as C
   float tmpF = float((int16_t)data[0]) / 10.0;
-  if (m_isCelcius)
+  if (m_isCelsius)
     m_temperature = tmpF;
   else
     m_temperature = f2c(tmpF);
@@ -240,7 +240,7 @@ void T3311::update()
     {
       // we always store temps in C
       tmpF = float((int16_t)data[4]) / 10.0;
-      if (m_isCelcius)
+      if (m_isCelsius)
         m_dewPointTemperature = tmpF;
       else
         m_dewPointTemperature = f2c(tmpF);

src/t3311/t3311.hpp

@@ -90,7 +90,7 @@ namespace upm {
       // Advantech-ADAM standard section) in the "Description of
       // communications protocols of TXXXX series" document.  We use
       // it to simply detect whether the device is configured for
-      // Celcius or Fahrenheit data and compensate internally.
+      // Celsius or Fahrenheit data and compensate internally.
 
       REG_UNIT_SETTINGS                     = 0x203F,
 
@@ -144,9 +144,9 @@ namespace upm {
      * prior to calling this method.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -183,9 +183,9 @@ namespace upm {
      * extendedDataAvailable() returns true).
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last dew point temperature reading in Celcius or
+     * @return The last dew point temperature reading in Celsius or
      * Fahrenheit
      */
     float getDewPointTemperature(bool fahrenheit=false);
@@ -281,7 +281,7 @@ namespace upm {
     modbus_t *m_mbContext;
 
     // is the device reporting in C or F?
-    bool m_isCelcius;
+    bool m_isCelsius;
 
     // Is the device FW > than 2.44?
     bool m_isExtendedDataAvailable;

src/t8100/t8100.cxx

@@ -34,7 +34,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {
@@ -56,7 +56,7 @@ T8100::T8100(uint32_t targetDeviceObjectID) :
   checkReliability(false);
 
   m_isTempInitialized = false;
-  m_isCelcius = false;
+  m_isCelsius = false;
 
   m_humidity = 0.0;
   m_temperature = 0.0;
@@ -78,7 +78,7 @@ void T8100::update()
 
   float tmpF = getAnalogInput(AI_Temperature_Thermistor);
 
-  if (m_isCelcius)
+  if (m_isCelsius)
     m_temperature = tmpF;
   else
     m_temperature = f2c(tmpF);
@@ -101,7 +101,7 @@ void T8100::setTemperatureScale(bool fahrenheit)
   setBinaryValue(BV_Temperature_Units, fahrenheit);
 
   m_isTempInitialized = true;
-  m_isCelcius = (fahrenheit) ? false : true;
+  m_isCelsius = (fahrenheit) ? false : true;
 }
 
 bool T8100::getTemperatureScale()
@@ -109,7 +109,7 @@ bool T8100::getTemperatureScale()
   bool scale = getBinaryValue(BV_Temperature_Units);
 
   m_isTempInitialized = true;
-  m_isCelcius = !scale;
+  m_isCelsius = !scale;
 
   return scale;
 }
@@ -126,7 +126,7 @@ void T8100::setTemperatureOffset(float value)
     {
       throw std::out_of_range(std::string(__FUNCTION__)
                               + ": value must be between -50 and 50,"
-                              + " in degrees Celcius");
+                              + " in degrees Celsius");
 
     }
 

src/t8100/t8100.hpp

@@ -167,9 +167,9 @@ namespace upm {
      * prior to calling this method.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit.
+     * @return The last temperature reading in Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -186,20 +186,20 @@ namespace upm {
     }
 
     /**
-     * Set the device temperature scale to Celcius of Fahrenheit.  For
+     * Set the device temperature scale to Celsius of Fahrenheit.  For
      * devices with an LCD display, this will affect which scale is
      * displayed.  When changing the scale, it may take several
      * seconds for the setting to take effect.
      *
      * @param fahrenheit true to set the scale to fahrenheit, false
-     * for celcius.
+     * for celsius.
      */
     void setTemperatureScale(bool fahrenheit);
 
     /**
      * Get the device temperature scale.
      *
-     * @return true if scale is fahrenheit, false for celcius.
+     * @return true if scale is fahrenheit, false for celsius.
      */
     bool getTemperatureScale();
 
@@ -213,7 +213,7 @@ namespace upm {
     /**
      * Set the device temperature offset.  The offset is applied by
      * the device internally to the temperature reading.  The offset
-     * must always be specified in degrees Celcius.  Valid values must
+     * must always be specified in degrees Celsius.  Valid values must
      * be between -50 and 50.
      *
      * @param value The temperature offset to configure.
@@ -373,7 +373,7 @@ namespace upm {
     // Have we checked the device's temperature unit setting yet
     bool m_isTempInitialized;
 
-    // Is the device configured for Celcius?
+    // Is the device configured for Celsius?
-    bool m_isCelcius;
+    bool m_isCelsius;
   };
 }

src/tb7300/tb7300.cxx

@@ -33,7 +33,7 @@
 using namespace upm;
 using namespace std;
 
-// conversion from fahrenheit to celcius and back
+// conversion from fahrenheit to celsius and back
 
 static float f2c(float f)
 {
@@ -55,7 +55,7 @@ TB7300::TB7300(uint32_t targetDeviceObjectID) :
   checkReliability(false);
 
   m_isTempInitialized = false;
-  m_isCelcius = false;
+  m_isCelsius = false;
 
   // room temperature only
   m_temperature = 0.0;
@@ -75,7 +75,7 @@ void TB7300::update()
 
   float tmpF = getAnalogValue(AV_Room_Temperature);
 
-  if (m_isCelcius)
+  if (m_isCelsius)
     m_temperature = tmpF;
   else
     m_temperature = f2c(tmpF);
@@ -94,7 +94,7 @@ void TB7300::setTemperatureScale(bool fahrenheit)
   setBinaryValue(BV_Temperature_Scale, fahrenheit);
 
   m_isTempInitialized = true;
-  m_isCelcius = (fahrenheit) ? false : true;
+  m_isCelsius = (fahrenheit) ? false : true;
 }
 
 bool TB7300::getTemperatureScale()
@@ -102,7 +102,7 @@ bool TB7300::getTemperatureScale()
   bool scale = getBinaryValue(BV_Temperature_Scale);
 
   m_isTempInitialized = true;
-  m_isCelcius = !scale;
+  m_isCelsius = !scale;
 
   return scale;
 }

src/tb7300/tb7300.hpp

@@ -222,27 +222,27 @@ namespace upm {
      * prior to calling this method.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit.
+     * @return The last temperature reading in Celsius or Fahrenheit.
      */
     float getTemperature(bool fahrenheit=false);
 
     /**
-     * Set the device temperature scale to Celcius of Fahrenheit.  For
+     * Set the device temperature scale to Celsius of Fahrenheit.  For
      * devices with an LCD display, this will affect which scale is
      * displayed.  When changing the scale, it may take several
      * seconds for the setting to take effect.
      *
      * @param fahrenheit true to set the scale to fahrenheit, false
-     * for celcius.
+     * for celsius.
      */
     void setTemperatureScale(bool fahrenheit);
 
     /**
      * Get the device temperature scale.
      *
-     * @return true if scale is fahrenheit, false for celcius.
+     * @return true if scale is fahrenheit, false for celsius.
      */
     bool getTemperatureScale();
 
@@ -251,7 +251,7 @@ namespace upm {
     float m_temperature;
 
     bool m_isTempInitialized;
-    bool m_isCelcius;
+    bool m_isCelsius;
 
   private:
   };

src/teams/teams.cxx

@@ -33,7 +33,7 @@ using namespace std;
 // several aio reads.
 static const int maxSamples = 50;
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/teams/teams.hpp

@@ -100,9 +100,9 @@ namespace upm {
      * prior to calling this method.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -161,7 +161,7 @@ namespace upm {
     bool m_connected;
     float m_rawMilliamps;
 
-    // in Celcius
+    // in Celsius
     float m_temperature;
 
     // in case an offset should be applied to the cumputed current

src/tex00/tex00.cxx

@@ -32,7 +32,7 @@ using namespace std;
 // we average over several aio reads.
 static const int maxSamples = 10;
 
-// conversion from celcius to fahrenheit
+// conversion from celsius to fahrenheit
 
 static float c2f(float c)
 {

src/tex00/tex00.hpp

@@ -122,9 +122,9 @@ namespace upm {
      * prior to calling this method.
      *
      * @param fahrenheit true to return the temperature in degrees
-     * fahrenheit, false to return the temperature in degrees celcius.
+     * fahrenheit, false to return the temperature in degrees celsius.
-     * The default is false (degrees Celcius).
+     * The default is false (degrees Celsius).
-     * @return The last temperature reading in Celcius or Fahrenheit
+     * @return The last temperature reading in Celsius or Fahrenheit
      */
     float getTemperature(bool fahrenheit=false);
 
@@ -169,7 +169,7 @@ namespace upm {
     float m_aref;
     int m_aResTemp;
 
-    // in Celcius
+    // in Celsius
     float m_temperature;
     // temp reading out of range
     bool m_outOfRange;

src/upm/iTemperatureSensor.hpp

@@ -34,7 +34,7 @@ namespace upm
    class ITemperatureSensor : public IModuleStatus
    {
    public:
-       virtual int getTemperatureCelcius () = 0;
+       virtual int getTemperatureCelsius () = 0;
        virtual ~ITemperatureSensor() {}
    };