Merged conflict in grove.cxx GroveTemp::value where new
scale factor was added. Changed to apply scale factor
post error-check.
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
aio: mraa_aio_read (v1.0.0) can now return -1, treat that in sensors using it
Adds alot of exceptions if the aio read goes wrong
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
L3GD20 is tri-axis gyroscope from STMicroelectronics.
This sensor can measure angular velocity in degree per second.
The library provided is libupm-l3gd20.so.0.4.0.
The example provided is l3gd20-example where it will print x,y,z axis when
trigger buffer data is ready.
This sensor requires calibration to be done for 2 seconds. Please place the
sensor on level surface.
As the sensor data is noisy, we have implemented denoise algorithm within the
sensor library.
Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
Code cleanup and proper close iio device in destructor.
KXCJK-1013 is tri-axis accelerometer from Kionix.
This sensor can measure acceleration in metre per second squared or in
G-forces.
The library provided is libupm-kxcjk1013.so.0.4.0.
The example provided is kxcjk1013-example where it will print x,y,z axis when
trigger buffer data is ready.
Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com>
This driver implements support for the Bosch BNO055 Absolute
Orientation 9DOF Fusion Hub. It was implemented on the Adafruit
variant at https://www.adafruit.com/products/2472.
The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit
accelerometer, a triaxial 16-bit gyroscope with a range of ±2000
degrees per second, a triaxial geomagnetic sensor and a 32-bit cortex
M0+ microcontroller running Bosch Sensortec sensor fusion software, in
a single package.
This sensor handles the hard problem of combining various sensor
information into a reliable measurement of sensor orientation (refered
to as 'sensor fusion'). The onboard MCU runs this software and can
provide fusion output in the form of Euler Angles, Quaternions, Linear
Acceleration, and Gravity Vectors in 3 axes.
The focus on this driver has been on supporting the fusion components.
Less support is available for use of this device as a generic
accelerometer, gyroscope and magnetometer, however enough
infrastructure is available to add any missing functionality.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
Previously in MRAA, the libmraa library was statically linked into the
libmraajava library. This was changed recently in MRAA, causing most
java examples to fail due to missing mraa symbols. This patch
specifically adds libmraa to the link in addition to libmraajava.
In addition, use *_LIBRARIES in the java specific swig_link_libraries
call rather than *_LDFLAGS.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
This library adds support for both the BMP280 and BME280 sesnors from
Bosch. The BME is virtually identical to the BMP280 aside from some
slight register changes and adding support for a humidity sensor.
The BMP280 is an absolute barometric pressure sensor especially
designed for mobile applications. The sensor module is housed in an
extremely compact 8-pin metal-lid LGA package with a footprint of only
2.0 × 2.5 mm2 and 0.95 mm package height. Its small dimensions and its
low power consumption of 2.7 μA @1Hz allow the implementation in
battery driven devices such as mobile phones, GPS modules or watches.
The BME280 is as combined digital humidity, pressure and temperature
sensor based on proven sensing principles. The sensor module is housed
in an extremely compact metal-lid LGA package with a footprint of only
2.5 × 2.5 mm2 with a height of 0.93 mm. Its small dimensions and its
low power consumption allow the implementation in battery driven
devices such as handsets, GPS modules or watches. The BME280 is
register and performance compatible to the Bosch Sensortec BMP280
digital pressure sensor
These drivers support both I2C and SPI operation.
When using SPI on an Edison with the arduino breakout board, you
must specify a CS of -1 to the constructor, and connect the chip's
CS pin to arduino pin 10.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
This driver, based on bosch code is being removed in favor of a new
driver to be added soon that is more fully functional and includes SPI
support.
The new driver will be included along with a BMP280 implementation in
a new bmp280 library.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
This commit removes the old bmp180 driver that was erroneously
re-added when the interface examples and headers were introduced.
It then switches the users of bmp180 to the existing bmpx8x driver,
which already supports the bmp180.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
Proper close iio device in destructor.
APDS-9930 is light and proximity sensor from Avago Technologies.
This sensor can measure ambient light in lux and proximity distance in 100mm.
The library provided is libupm-apds9930.so.0.4.0.
The example provided is apds9930-example where this app will print the value of
ambient light and proximity in every 1 second.
Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
Code cleanup and proper close iio device in destructor.
KXCJK-1013 is tri-axis accelerometer from Kionix.
This sensor can measure acceleration in metre per second squared or in
G-forces.
The library provided is libupm-kxcjk1013.so.0.4.0.
The example provided is kxcjk1013-example where it will print x,y,z axis when
trigger buffer data is ready.
Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
The env CC=clang builds were previously getting overridden for each build since
the language: cpp defaults gcc/g++ (travis-ci was not building UPM w/clang).
This commit explicitly adds the clang compiler to the build matrix.
* Specify gcc/clang in the compiler directive
* Add a node.js 0.10 entry
* Add a few debug messages
* General cleanup of .travis.yml
* Add the upm make install step for completeness
Signed-off-by: Noel Eck <noel.eck@intel.com>
This driver supports, and was tested with, a DS18B20 1-wire
Temperature Sensor using external power.
This device requires the use of a UART to provide access to a Dallas
1-wire bus, via a new facility supported by MRAA (once the relevant PR
is accepted), using the UartOW access class. It is important to
realize that the UART is only being used to access and control a
Dallas 1-wire compliant bus, it is not actually a UART device.
Multiple DS18B20 devices can be connected to this bus. This module
will identify all such devices connected, and allow you to access them
using an index starting at 0.
Parasitic power is not currently supported due to the very tight 10us
limit on switching a GPIO properly to supply power during certain
operations. For this reason, you should use external power for your
sensors.
Setting the alarm values (Tl, Th) is also not supported, since this is
only useful when doing a 1-wire device search looking for devices in
an alarm state, a capability not yet supported in MRAA. In reality,
this is trivial to handle yourself in your application.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Noel Eck <noel.eck@intel.com>
This adds initial support for the DS2413 Dual Channel Addressable
Switch. This is a Dallas Semiconductor 1-wire compliant device
providing access to 2 open-drain GPIOs.
https://learn.adafruit.com/adafruit-1-wire-gpio-breakout-ds2413/overview
This driver requires One-Wire over UART support in MRAA (PR #415)
which is not yet merged.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
To make room for UPM C and C++ sensor code to coexist, all UPM
C++ headers have been renamed from h -> hpp. This commit contains
updates to documentation, includes, cmake collateral, examples, and
swig interface files.
* Renamed all cxx/cpp header files which contain the string
'copyright intel' from .h -> .hpp (if not already hpp).
* Replaced all references to .h with .hpp in documentation,
source files, cmake collateral, example code, and swig interface
files.
* Replaced cmake variable module_h with module_hpp.
* Intentionally left upm.h since this file currently does not
contain code (documentation only).
Signed-off-by: Noel Eck <noel.eck@intel.com>
The boschdriver.h file contains tags which are picked up by
doxygen and cause incorrect results. For example, the
\mainpage and \license cause the Bosch header collateral to
be placed on the index.html page of the UPM docs.
Added an entry to EXCLUDE_PATTERNS which handles this.
Signed-off-by: Noel Eck <noel.eck@intel.com>
This UPM module captures a still frame from a Linux V4L device, such
as a USB webcam, and and then allows you to save it as a JPEG image
into a file.
The camera and driver in use must support streaming, mmap-able buffers
and must provide data in YUYV format. This should encompass most
video cameras out there. It has been tested with a few off the shelf
USB cameras without any problems.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
