/*
 * Author: Jon Trulson <jtrulson@ics.com>
 * Copyright (c) 2016 Intel Corporation.
 *
 * This program and the accompanying materials are made available under the
 * terms of the The MIT License which is available at
 * https://opensource.org/licenses/MIT.
 *
 * SPDX-License-Identifier: MIT
 */

var sensorObj = require('jsupm_mcp2515');

// Instantiate a MCP2515 on SPI bus 0 using a hw CS pin (-1).
var sensor = new sensorObj.MCP2515(0, -1);

// NOTE: This example assumes that only two devices are connected
// to the CAN bus, and that both devices are running this example;
// one in TX (transmit) mode, and one in RX (receive) mode.

// If this is not the case, then in rx mode you may see other
// packets from other devices, or not, depending on whether the
// speed is correct for the network.  In tx mode, errors may be
// generated on the bus, especially if the CAN bus speed does not
// match the rest of the network.

// You should start the receiver example first.  The transmitter
// example will fail after about 5 seconds (timeout) of not being
// able to transmit a message.

function transmit(sensor)
{
    // lets build up a packet and try loading it (8 bytes max).
    var myPayload = "01234567";
    console.log("Loading a packet of 8 numbers (0-7) into a TX buffer...");
    sensor.loadTXBuffer(sensorObj.MCP2515_TX_BUFFER0,
                        0, false, false, myPayload);

    // now lets try to transmit it
    console.log("Transmitting packet...");
    sensor.transmitBuffer(sensorObj.MCP2515_TX_BUFFER0, true);

    console.log("Transmit successful");
    console.log();
}

function receive(sensor)
{
    // There should now be a packet waiting for us in RXB0
    if (sensor.rxStatusMsgs() == sensorObj.MCP2515_RXMSG_RXB0)
    {
        console.log("Packet received in RXB0, decoding...");

        // now lets retrieve and print it
        sensor.getRXMsg(sensorObj.MCP2515_RX_BUFFER0);

        sensor.printMsg();
        console.log();
    }
}

// by default we just receive packets
if (process.argv.length > 2)
{
    // transmit mode
    interval = setInterval(function() { transmit(sensor); }, 500);
}
else
{
    // receive mode
    interval = setInterval(function() { receive(sensor); }, 100);
}

process.on('SIGINT', function()
{
    sensor = null;
    sensorObj.cleanUp();
    sensorObj = null;
    console.log("Exiting...");
    process.exit(0);
});