/*
* Author: Marc Graham <marc@m2ag.net>
* Copyright (c) 2015 Intel Corporation.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include "mraa.hpp"
#include <iostream>
#include <unistd.h>
#include "ads1015.hpp"
#include "ads1115.hpp"
int main()
{
using namespace std;
using namespace upm;
int command;
//Select the device you are testing here and adjust case 6 for the correct sample rates.
//upm::ADS1015 *ads = new upm::ADS1015(1);
upm::ADS1115 *ads = new upm::ADS1115(1, 0x49);
float inputVoltage;
int ans;
do
{
cout << endl;
cout << "1 - get Conversion \t" ;
cout << "2 - get last conversion" << endl;
cout << "3 - get Gain \t\t";
cout << "4 - set Gain" << endl;;
cout << "5 - get Data Rate \t";
cout << "6 - set Data Rate" << endl;
cout << "7 - Set Upper Threshold \t" ;
cout << "8 - Set Lower Threshold \t";
cout << "9 - Display Thresholds \t";
cout << "10 - Set Default Thresholds \t";
cout << "11 - Set conversion ready" << endl;
cout << "12 - get Comp Que \t" ;
cout << "13 - set Comp Que" << endl;
cout << "14 - get Comp Pol \t";
cout << "15 - set Comp Pol" << endl;
cout << "16 - get Comp mode \t";
cout << "17 - set Comp mode " << endl;
cout << "18 - get Comp Latch\t";
cout << "19 - set Comp Latch " << endl;
cout << "20 - get Continuous \t";
cout << "21 - set Continuous \t" << endl;
cout << "-1 - exit" << endl;
cout << "Enter a command: ";
cin >> command;
switch(command)
{
case 2:
cout << ads->getLastSample() << endl;
break;
case 3:
cout << std::hex << ads->getGain() << endl;
break;
case 5:
cout << std::hex << ads->getSPS() << endl;
break;
case 4:
int gain;
ADS1015::ADSGAIN set_gain;
cout << "select one of the following:" << endl;
cout << "1 -> gain 2/3 \t 2 -> gain1 \t 3 -> gain 2" << endl;
cout << "4 -> gain 4 \t 5 -> gain 8 \t 6 -> gain 15" << endl;
cin >> gain;
switch(gain){
case 1:
set_gain = ADS1X15::GAIN_TWOTHIRDS;
break;
case 2:
set_gain = ADS1X15::GAIN_ONE;
break;
case 3:
set_gain = ADS1X15::GAIN_TWO;
break;
case 4:
set_gain = ADS1X15::GAIN_FOUR;
break;
case 5:
set_gain = ADS1X15::GAIN_EIGHT;
break;
case 6:
set_gain = ADS1X15::GAIN_SIXTEEN;
break;
default:
set_gain = ADS1X15::GAIN_ONE;
}
ads->setGain(set_gain);
break;
case 6:
int rate;
/*ADS1015::ADSDATARATE set_rate;
cout << "select one of the following:" << endl;
cout << "1 -> SPS_120 \t 2 -> SPS_250 \t 3 -> SPS_490 \t 4 -> SPS_920" << endl;
cout << "5 -> SPS_1600 \t 6 -> SPS_2400 \t 7 -> SPS_3300" << endl;
cin >> rate;
switch(rate){
case 1:
set_rate = ADS1015::SPS_128;
break;
case 2:
set_rate = ADS1015::SPS_250;
break;
case 3:
set_rate = ADS1015::SPS_490;
break;
case 4:
set_rate = ADS1015::SPS_920;
break;
case 5:
set_rate = ADS1015::SPS_1600;
break;
case 6:
set_rate = ADS1015::SPS_2400;
break;
case 7:
set_rate = ADS1015::SPS_3300;
break;
default:
set_rate = ADS1015::SPS_1600;
} */
ADS1115::ADSDATARATE set_rate;
cout << "select one of the following:" << endl;
cout << "1 -> SPS_8 \t 2 -> SPS_16 \t 3 -> SPS_32 \t 4 -> SPS_64" << endl;
cout << "5 -> SPS_128 \t 6 -> SPS_250 \t 7 -> SPS_475 \t 8-> SPS_860" << endl;
cin >> rate;
switch(rate){
case 1:
set_rate = ADS1115::SPS_8;
break;
case 2:
set_rate = ADS1115::SPS_16;
break;
case 3:
set_rate = ADS1115::SPS_32;
break;
case 4:
set_rate = ADS1115::SPS_64;
break;
case 5:
set_rate = ADS1115::SPS_128;
break;
case 6:
set_rate = ADS1115::SPS_250;
break;
case 7:
set_rate = ADS1115::SPS_475;
break;
case 8:
set_rate = ADS1115::SPS_860;
break;
default:
set_rate = ADS1115::SPS_128;
}
ads->setSPS(set_rate);
break;
case 1:
int mode;
ADS1X15::ADSMUXMODE set_mode;
cout << "select one of the following:" << endl;
cout << "1 -> MUX_0_1 \t 2 -> MUX_0_3 \t 3 -> MUX_1_3 \t 4 -> MUX_2_3" << endl;
cout << "5 -> SINGLE_0 \t 6 -> SINGLE_1 \t 7 -> SINGLE_2 \t 8 -> SINGLE_3" << endl;
cin >> mode;
switch(mode){
case 1:
set_mode = ADS1X15::DIFF_0_1;
break;
case 2:
set_mode = ADS1X15::DIFF_0_3;
break;
case 3:
set_mode = ADS1X15::DIFF_1_3;
break;
case 4:
set_mode = ADS1X15::DIFF_2_3;
break;
case 5:
set_mode = ADS1X15::SINGLE_0;
break;
case 6:
set_mode = ADS1X15::SINGLE_1;
break;
case 7:
set_mode = ADS1X15::SINGLE_2;
break;
case 8:
set_mode = ADS1X15::SINGLE_3;
break;
default:
set_mode = ADS1X15::DIFF_0_1;
break;
}
cout << ads->getSample(set_mode) << endl;
break;
case 7:
cout << " enter a float value: " ;
cin >> inputVoltage;
ads->setThresh(ADS1115::THRESH_HIGH, inputVoltage);
break;
case 8:
cout << " enter a float value: " ;
cin >> inputVoltage;
ads->setThresh(ADS1115::THRESH_LOW, inputVoltage);
break;
case 9:
cout << "Upper " << ads->getThresh(ADS1X15::THRESH_HIGH) << endl;
cout << "Lower " << ads->getThresh(ADS1X15::THRESH_LOW) << endl;
break;
case 10:
ads->setThresh(ADS1115::THRESH_DEFAULT);
break;
case 11:
ads->setThresh(ADS1015::CONVERSION_RDY);
break;
case 12:
cout << ads->getCompQue() << endl;
break;
case 13:
int que;
cout << "select one of the following:" << endl;
cout << "1 -> CQUE_1CONV \t 2 -> CQUE_2CONV \t 3 -> CQUE_3CONV \t 4 -> CQUE_NONE" << endl;
cin >> que;
switch(que){
case 1:
ads->setCompQue(ADS1X15::CQUE_1CONV);
break;
case 2:
ads->setCompQue(ADS1X15::CQUE_2CONV);
break;
case 3:
ads->setCompQue(ADS1X15::CQUE_4CONV);
break;
case 4:
default:
ads->setCompQue(ADS1X15::CQUE_NONE);
break;
}
break;
case 14:
cout << ads->getCompPol() << endl;
break;
case 15:
cout << "select one of the following:" << endl;
cout << "1 -> active high \t 2 -> active low" << endl;
cin >> ans;
if(ans == 1) ads->setCompPol(true);
else ads->setCompPol(false);
break;
case 16:
cout << ads->getCompMode() << endl;
break;
case 17:
cout << "select one of the following:" << endl;
cout << "1 -> Window \t 2 -> Traditional (default)" << endl;
cin >> ans;
if(ans == 1) ads->setCompMode(true);
else ads->setCompMode();
break;
case 18:
cout << ads->getCompLatch() << endl;
break;
case 19:
cout << "select one of the following:" << endl;
cout << "1 -> Latching \t 2 -> Non-latching (default)" << endl;
cin >> ans;
if(ans == 1) ads->setCompLatch(true);
else ads->setCompLatch();
break;
case 20:
cout << ads->getContinuous() << endl;
break;
case 21:
cout << "select one of the following:" << endl;
cout << "1 -> Power Down (default) \t 2 -> Continuous" << endl;
cin >> ans;
if(ans == 1) ads->setContinuous(true);
else ads->setContinuous();
break;
case -1:
break;
default:
break;
}
}while (command != -1 );
delete ads;
return MRAA_SUCCESS;
}