upm/examples/c++/mcp2515-txrx.cxx

/*
 * Author: Jon Trulson <jtrulson@ics.com>
 * Copyright (c) 2016 Intel Corporation.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

#include <unistd.h>
#include <stdio.h>
#include <iostream>
#include <signal.h>
#include <upm_utilities.h>

#include "mcp2515.hpp"

using namespace std;

bool shouldRun = true;

void sig_handler(int signo)
{
  if (signo == SIGINT)
    shouldRun = false;
}


int main(int argc, char **argv)
{
    signal(SIGINT, sig_handler);

    // by default we just receive packets
    bool do_tx = false;

    // if an argument is given, we will transmit packets
    if (argc > 1)
        do_tx = true;
//! [Interesting]

    // NOTE: This example assumes that only two devices are connected
    // to the CAN bus, and that both devices are running this example;
    // one in TX (transmit) mode, and one in RX (receive) mode.

    // If this is not the case, then in rx mode you may see other
    // packets from other devices, or not, depending on whether the
    // speed is correct for the network.  In tx mode, errors may be
    // generated on the bus, especially if the CAN bus speed does not
    // match the rest of the network.

    // You should start the receiver example first.  The transmitter
    // example will fail after about 5 seconds (timeout) of not being
    // able to transmit a message.

    // Instantiate a MCP2515 on SPI bus 0 using a hw CS pin (-1).
    upm::MCP2515 *sensor = new upm::MCP2515(0, 9);

    // By default, after initialization, the baud rate is set to
    // 50Kbps, and the mode is NORMAL, so we don't need to set any of
    // that here.

    // our TX payload.  If transmitting, the first number will be
    // incremented (and rollover) on each transmission.
    string myPayload = "01234567";

    while (shouldRun)
    {
        if (do_tx)
        {
            cout << "Loading a packet of 8 numbers (0-7) into a TX buffer..."
                 << endl;
            sensor->loadTXBuffer(MCP2515_TX_BUFFER0, 0, false, false,
                                 myPayload);

            // now lets try to transmit it
            cout << "Transmitting packet..." << endl;
            sensor->transmitBuffer(MCP2515_TX_BUFFER0, true);

            myPayload[0]++;
            cout << "Transmit successful" << endl;
            cout << endl;

            upm_delay_ms(500);
        }
        else
        {
            // RX mode
            // Look for a packet waiting for us in RXB0
            if (sensor->rxStatusMsgs() == MCP2515_RXMSG_RXB0)
            {
                cout << "Packet received in RXB0, decoding..." << endl;

                // now lets retrieve and print it
                sensor->getRXMsg(MCP2515_RX_BUFFER0);

                sensor->printMsg();
                cout << endl;
            }

            upm_delay_ms(100);
        }
    }

    cout << "Exiting..." << endl;

    delete sensor;
//! [Interesting]

    return 0;
}