From c8007ade5d6cc62f4af3de909623be914163be76 Mon Sep 17 00:00:00 2001 From: Alexey Zholtikov Date: Fri, 5 Jul 2024 13:48:41 +0300 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index ff42d15..9a2ca82 100644 --- a/README.md +++ b/README.md @@ -20,7 +20,7 @@ ESP-NOW based led controller/light for ESP32 ESP-IDF and ESP8266 RTOS SDK. Alter 2. ESP-NOW mesh network based on the [zh_network](https://github.com/aZholtikov/zh_network). 3. For initial settings use "menuconfig -> ZH ESP-NOW Led Configuration". After first boot all settings will be stored in NVS memory for prevente change during OTA firmware update. 4. To restart the led, send the "restart" command to the root topic of the led (example - "homeassistant/espnow_led/24-62-AB-F9-1F-A8"). -5. To update the led firmware, send the "update" command to the root topic of the led (example - "homeassistant/espnow_led/70-03-9F-44-BE-F7"). The update path should be like as "https://your_server/zh_espnow_led_esp32.bin" (for ESP32) or "https://your_server/zh_espnow_led_esp8266.app1.bin + https://your_server/zh_espnow_led_esp8266.app2.bin" (for ESP8266). The time and success of the update depends on the load on WiFi channel 1. Average update time is up to five minutes. The online status of the update will be displayed in the root led topic. +5. To update the led firmware, send the "update" command to the root topic of the led (example - "homeassistant/espnow_led/70-03-9F-44-BE-F7"). The update path should be like as "https://your_server/zh_espnow_led_esp32.bin" (for ESP32) or "https://your_server/zh_espnow_led_esp8266.app1.bin + https://your_server/zh_espnow_led_esp8266.app2.bin" (for ESP8266). Average update time is up to some minutes. The online status of the update will be displayed in the root led topic. 6. To change initial settings of the led (except work mode), send the X1,X2,X3,X4,X5,X6 command to the hardware topic of the led (example - "homeassistant/espnow_led/70-03-9F-44-BE-F7/hardware"). The configuration will only be accepted if it does not cause errors. The current configuration status is displayed in the configuration topic of the led (example - "homeassistant/espnow_led/70-03-9F-44-BE-F7/config"). MQTT configuration message should filled according to the template "X1,X2,X3,X4,X5,X6". Where: