alexey.zholtikov/zh_espnow_sensor
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 6 Wiki Activity
zh_espnow_sensor/main/zh_espnow_sensor.c
Alexey Zholtikov db2a33d47f Version 1.0.0 
Initial version.
2024-05-28 20:19:38 +03:00

609 lines
25 KiB
C
Raw Blame History

#include "zh_espnow_sensor.h"
sensor_config_t sensor_main_config = {0};
void app_main(void)
{
sensor_config_t *sensor_config = &sensor_main_config;
nvs_flash_init();
esp_netif_init();
esp_event_loop_create_default();
zh_load_config(sensor_config);
zh_sensor_init(sensor_config);
uint8_t power_selection_pin = zh_load_power_selection_pin();
if (power_selection_pin != ZH_NOT_USED && sensor_config->hardware_config.battery_power == true)
{
gpio_config_t config = {0};
config.intr_type = GPIO_INTR_DISABLE;
config.mode = GPIO_MODE_INPUT;
config.pin_bit_mask = (1ULL << power_selection_pin);
config.pull_down_en = GPIO_PULLDOWN_DISABLE;
config.pull_up_en = GPIO_PULLUP_ENABLE;
gpio_config(&config);
if (gpio_get_level(power_selection_pin) == 0)
{
sensor_config->hardware_config.battery_power = false;
}
}
wifi_init_config_t wifi_init_config = WIFI_INIT_CONFIG_DEFAULT();
esp_wifi_init(&wifi_init_config);
esp_wifi_set_mode(WIFI_MODE_STA);
esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B);
esp_wifi_start();
#ifdef CONFIG_NETWORK_TYPE_DIRECT
zh_espnow_init_config_t espnow_init_config = ZH_ESPNOW_INIT_CONFIG_DEFAULT();
zh_espnow_init(&espnow_init_config);
#else
zh_network_init_config_t network_init_config = ZH_NETWORK_INIT_CONFIG_DEFAULT();
zh_network_init(&network_init_config);
#endif
#ifdef CONFIG_IDF_TARGET_ESP8266
esp_event_handler_register(ZH_EVENT, ESP_EVENT_ANY_ID, &zh_espnow_event_handler, sensor_config);
if (sensor_config->hardware_config.battery_power == true)
{
zh_sensor_deep_sleep(sensor_config);
}
#else
esp_event_handler_instance_register(ZH_EVENT, ESP_EVENT_ANY_ID, &zh_espnow_event_handler, sensor_config, NULL);
if (sensor_config->hardware_config.battery_power == true)
{
zh_sensor_deep_sleep(sensor_config);
}
else
{
const esp_partition_t *running = esp_ota_get_running_partition();
esp_ota_img_states_t ota_state = {0};
esp_ota_get_state_partition(running, &ota_state);
if (ota_state == ESP_OTA_IMG_PENDING_VERIFY)
{
vTaskDelay(60000 / portTICK_PERIOD_MS);
esp_ota_mark_app_valid_cancel_rollback();
}
}
#endif
}
void zh_load_config(sensor_config_t *sensor_config)
{
nvs_handle_t nvs_handle = {0};
nvs_open("config", NVS_READWRITE, &nvs_handle);
uint8_t config_is_present = {0};
if (nvs_get_u8(nvs_handle, "present", &config_is_present) == ESP_ERR_NVS_NOT_FOUND)
{
nvs_set_u8(nvs_handle, "present", 0xFE);
nvs_close(nvs_handle);
#ifdef CONFIG_SENSOR_TYPE_DS18B20
sensor_config->hardware_config.sensor_type = HAST_DS18B20;
#elif CONFIG_SENSOR_TYPE_DHT11
sensor_config->hardware_config.sensor_type = HAST_DHT11;
#elif CONFIG_SENSOR_TYPE_DHT22
sensor_config->hardware_config.sensor_type = HAST_DHT22;
#else
sensor_config->hardware_config.sensor_type = HAST_NONE;
#endif
#ifdef CONFIG_MEASUREMENT_FREQUENCY
sensor_config->hardware_config.measurement_frequency = CONFIG_MEASUREMENT_FREQUENCY;
#else
sensor_config->hardware_config.measurement_frequency = 0;
#endif
#ifdef CONFIG_SENSOR_PIN_1
sensor_config->hardware_config.sensor_pin_1 = CONFIG_SENSOR_PIN_1;
#else
sensor_config->hardware_config.sensor_pin_1 = ZH_NOT_USED;
#endif
#ifdef CONFIG_SENSOR_PIN_2
sensor_config->hardware_config.sensor_pin_2 = CONFIG_SENSOR_PIN_2;
#else
sensor_config->hardware_config.sensor_pin_2 = ZH_NOT_USED;
#endif
#ifdef CONFIG_POWER_CONTROL_PIN
sensor_config->hardware_config.power_pin = CONFIG_POWER_CONTROL_PIN;
#else
sensor_config->hardware_config.power_pin = ZH_NOT_USED;
#endif
#ifdef CONFIG_BATTERY_POWERED
sensor_config->hardware_config.battery_power = true;
#else
sensor_config->hardware_config.battery_power = false;
#endif
zh_save_config(sensor_config);
return;
}
nvs_get_u8(nvs_handle, "sensor_type", (uint8_t *)&sensor_config->hardware_config.sensor_type);
nvs_get_u8(nvs_handle, "sensor_pin_1", &sensor_config->hardware_config.sensor_pin_1);
nvs_get_u8(nvs_handle, "sensor_pin_2", &sensor_config->hardware_config.sensor_pin_2);
nvs_get_u8(nvs_handle, "power_pin", &sensor_config->hardware_config.power_pin);
uint16_t measurement_frequency = {0};
nvs_get_u16(nvs_handle, "frequency", &measurement_frequency); // Just to prevent a compiler warning.
sensor_config->hardware_config.measurement_frequency = measurement_frequency;
nvs_get_u8(nvs_handle, "battery_power", (uint8_t *)&sensor_config->hardware_config.battery_power);
nvs_close(nvs_handle);
}
void zh_save_config(const sensor_config_t *sensor_config)
{
nvs_handle_t nvs_handle = {0};
nvs_open("config", NVS_READWRITE, &nvs_handle);
nvs_set_u8(nvs_handle, "sensor_type", sensor_config->hardware_config.sensor_type);
nvs_set_u8(nvs_handle, "sensor_pin_1", sensor_config->hardware_config.sensor_pin_1);
nvs_set_u8(nvs_handle, "sensor_pin_2", sensor_config->hardware_config.sensor_pin_2);
nvs_set_u8(nvs_handle, "power_pin", sensor_config->hardware_config.power_pin);
nvs_set_u16(nvs_handle, "frequency", sensor_config->hardware_config.measurement_frequency);
nvs_set_u8(nvs_handle, "battery_power", sensor_config->hardware_config.battery_power);
nvs_close(nvs_handle);
}
uint8_t zh_load_power_selection_pin(void)
{
uint8_t power_selection_pin = {0};
nvs_handle_t nvs_handle = {0};
nvs_open("selection_pin", NVS_READWRITE, &nvs_handle);
uint8_t config_is_present = {0};
if (nvs_get_u8(nvs_handle, "present", &config_is_present) == ESP_ERR_NVS_NOT_FOUND)
{
nvs_set_u8(nvs_handle, "present", 0xFE);
nvs_close(nvs_handle);
#ifdef CONFIG_POWER_MODE_USING
power_selection_pin = CONFIG_POWER_MODE_PIN;
#else
uint8_t power_selection_pin = ZH_NOT_USED;
#endif
zh_save_power_selection_pin(&power_selection_pin);
return power_selection_pin;
}
nvs_get_u8(nvs_handle, "mode_pin", &power_selection_pin);
nvs_close(nvs_handle);
return power_selection_pin;
}
void zh_save_power_selection_pin(const uint8_t *power_selection_pin)
{
nvs_handle_t nvs_handle = {0};
nvs_open("selection_pin", NVS_READWRITE, &nvs_handle);
nvs_set_u8(nvs_handle, "mode_pin", *power_selection_pin);
nvs_close(nvs_handle);
}
void zh_sensor_init(sensor_config_t *sensor_config)
{
if (sensor_config->hardware_config.power_pin != ZH_NOT_USED)
{
gpio_config_t config = {0};
config.intr_type = GPIO_INTR_DISABLE;
config.mode = GPIO_MODE_OUTPUT;
config.pin_bit_mask = (1ULL << sensor_config->hardware_config.power_pin);
config.pull_down_en = GPIO_PULLDOWN_DISABLE;
config.pull_up_en = GPIO_PULLUP_DISABLE;
if (gpio_config(&config) != ESP_OK)
{
sensor_config->hardware_config.power_pin = ZH_NOT_USED;
}
else
{
gpio_set_level(sensor_config->hardware_config.power_pin, 0);
}
}
if (sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED)
{
switch (sensor_config->hardware_config.sensor_type)
{
case HAST_DS18B20:
if (zh_onewire_init(sensor_config->hardware_config.sensor_pin_1) != ESP_OK)
{
sensor_config->hardware_config.sensor_pin_1 = ZH_NOT_USED;
}
break;
case HAST_DHT11:
case HAST_DHT22:;
zh_dht_sensor_type_t sensor_type = (sensor_config->hardware_config.sensor_type == HAST_DHT11) ? ZH_DHT11 : ZH_DHT22;
sensor_config->dht_handle = zh_dht_init(sensor_type, sensor_config->hardware_config.sensor_pin_1);
sensor_config->hardware_config.sensor_pin_1 = sensor_config->dht_handle.sensor_pin;
break;
default:
sensor_config->hardware_config.sensor_type = HAST_NONE;
sensor_config->hardware_config.sensor_pin_1 = ZH_NOT_USED;
break;
}
}
}
void zh_sensor_deep_sleep(sensor_config_t *sensor_config)
{
uint8_t gateway[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
memcpy(sensor_config->gateway_mac, gateway, 6);
#ifndef CONFIG_IDF_TARGET_ESP8266
esp_sleep_enable_timer_wakeup(sensor_config->hardware_config.measurement_frequency * 1000000);
#endif
uint8_t required_message_quantity = 1;
zh_send_sensor_hardware_config_message(sensor_config);
if (sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED && sensor_config->hardware_config.sensor_type != HAST_NONE)
{
required_message_quantity += zh_send_sensor_config_message(sensor_config);
zh_send_sensor_status_message_task(sensor_config);
zh_send_sensor_attributes_message_task(sensor_config);
}
while (sensor_config->sent_message_quantity < (required_message_quantity + 2))
{
vTaskDelay(10 / portTICK_PERIOD_MS);
}
#ifdef CONFIG_IDF_TARGET_ESP8266
esp_deep_sleep(sensor_config->hardware_config.measurement_frequency * 1000000);
#else
esp_deep_sleep_start();
#endif
}
void zh_send_sensor_hardware_config_message(const sensor_config_t *sensor_config)
{
zh_config_message_t config_message = {0};
config_message = (zh_config_message_t)sensor_config->hardware_config;
zh_espnow_data_t data = {0};
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_HARDWARE;
data.payload_data = (zh_payload_data_t)config_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
}
void zh_send_sensor_attributes_message_task(void *pvParameter)
{
sensor_config_t *sensor_config = pvParameter;
const esp_app_desc_t *app_info = get_app_description();
zh_attributes_message_t attributes_message = {0};
attributes_message.chip_type = ZH_CHIP_TYPE;
attributes_message.sensor_type = sensor_config->hardware_config.sensor_type;
strcpy(attributes_message.flash_size, CONFIG_ESPTOOLPY_FLASHSIZE);
attributes_message.cpu_frequency = ZH_CPU_FREQUENCY;
attributes_message.reset_reason = (uint8_t)esp_reset_reason();
strcpy(attributes_message.app_name, app_info->project_name);
strcpy(attributes_message.app_version, app_info->version);
zh_espnow_data_t data = {0};
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_ATTRIBUTES;
for (;;)
{
attributes_message.heap_size = esp_get_free_heap_size();
attributes_message.min_heap_size = esp_get_minimum_free_heap_size();
attributes_message.uptime = esp_timer_get_time() / 1000000;
data.payload_data = (zh_payload_data_t)attributes_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
if (sensor_config->hardware_config.battery_power == true)
{
return;
}
vTaskDelay(ZH_SENSOR_ATTRIBUTES_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
}
vTaskDelete(NULL);
}
uint8_t zh_send_sensor_config_message(const sensor_config_t *sensor_config)
{
uint8_t messages_quantity = 0;
zh_espnow_data_t data = {0};
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_CONFIG;
zh_config_message_t config_message = {0};
zh_sensor_config_message_t sensor_config_message = {0};
sensor_config_message.suggested_display_precision = 1;
sensor_config_message.expire_after = sensor_config->hardware_config.measurement_frequency * 3;
sensor_config_message.enabled_by_default = true;
sensor_config_message.force_update = true;
sensor_config_message.qos = 2;
sensor_config_message.retain = true;
char *unit_of_measurement = NULL;
switch (sensor_config->hardware_config.sensor_type)
{
case HAST_DS18B20:
sensor_config_message.unique_id = 1;
sensor_config_message.sensor_device_class = HASDC_TEMPERATURE;
unit_of_measurement = "°C";
strcpy(sensor_config_message.unit_of_measurement, unit_of_measurement);
config_message = (zh_config_message_t)sensor_config_message;
data.payload_data = (zh_payload_data_t)config_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
++messages_quantity;
break;
case HAST_DHT11:
case HAST_DHT22:
sensor_config_message.unique_id = 1;
sensor_config_message.sensor_device_class = HASDC_TEMPERATURE;
unit_of_measurement = "°C";
strcpy(sensor_config_message.unit_of_measurement, unit_of_measurement);
config_message = (zh_config_message_t)sensor_config_message;
data.payload_data = (zh_payload_data_t)config_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
++messages_quantity;
sensor_config_message.unique_id = 2;
sensor_config_message.sensor_device_class = HASDC_HUMIDITY;
unit_of_measurement = "%";
strcpy(sensor_config_message.unit_of_measurement, unit_of_measurement);
config_message = (zh_config_message_t)sensor_config_message;
data.payload_data = (zh_payload_data_t)config_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
++messages_quantity;
break;
default:
break;
}
return messages_quantity;
}
void zh_send_sensor_status_message_task(void *pvParameter)
{
sensor_config_t *sensor_config = pvParameter;
float humidity = 0.0;
float temperature = 0.0;
zh_sensor_status_message_t sensor_status_message = {0};
sensor_status_message.sensor_type = sensor_config->hardware_config.sensor_type;
zh_status_message_t status_message = {0};
zh_espnow_data_t data = {0};
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_STATE;
for (;;)
{
if (sensor_config->hardware_config.power_pin != ZH_NOT_USED && sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED)
{
gpio_set_level(sensor_config->hardware_config.power_pin, 1);
vTaskDelay(1000 / portTICK_PERIOD_MS); // Power stabilization period after the sensor is turned on. The value is selected experimentally. DHT11/22 requires 1 second.
}
switch (sensor_config->hardware_config.sensor_type)
{
case HAST_DS18B20:
ZH_DS18B20_READ:
switch (zh_ds18b20_read(NULL, &temperature))
{
case ESP_OK:
sensor_status_message.temperature = temperature;
break;
case ESP_FAIL:
if (sensor_config->hardware_config.battery_power == false)
{
vTaskDelay(10000 / portTICK_PERIOD_MS);
goto ZH_DS18B20_READ;
}
break;
case ESP_ERR_INVALID_CRC:
if (sensor_config->hardware_config.battery_power == false)
{
vTaskDelay(1000 / portTICK_PERIOD_MS);
goto ZH_DS18B20_READ;
}
break;
default:
break;
}
break;
case HAST_DHT11:
case HAST_DHT22:
ZH_DHT_READ:
switch (zh_dht_read(&sensor_config->dht_handle, &humidity, &temperature))
{
case ESP_OK:
sensor_status_message.humidity = humidity;
sensor_status_message.temperature = temperature;
break;
case ESP_ERR_INVALID_RESPONSE:
if (sensor_config->hardware_config.battery_power == false)
{
vTaskDelay(10000 / portTICK_PERIOD_MS);
goto ZH_DHT_READ;
}
break;
case ESP_ERR_TIMEOUT:
if (sensor_config->hardware_config.battery_power == false)
{
vTaskDelay(10000 / portTICK_PERIOD_MS);
goto ZH_DHT_READ;
}
break;
case ESP_ERR_INVALID_CRC:
if (sensor_config->hardware_config.battery_power == false)
{
vTaskDelay(3000 / portTICK_PERIOD_MS);
goto ZH_DHT_READ;
}
break;
default:
break;
}
break;
default:
break;
}
status_message = (zh_status_message_t)sensor_status_message;
data.payload_data = (zh_payload_data_t)status_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
if (sensor_config->hardware_config.power_pin != ZH_NOT_USED && sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED)
{
gpio_set_level(sensor_config->hardware_config.power_pin, 0);
}
if (sensor_config->hardware_config.battery_power == true)
{
return;
}
vTaskDelay(sensor_config->hardware_config.measurement_frequency * 1000 / portTICK_PERIOD_MS);
}
vTaskDelete(NULL);
}
void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data)
{
sensor_config_t *sensor_config = arg;
zh_espnow_data_t data = {0};
switch (event_id)
{
#ifdef CONFIG_NETWORK_TYPE_DIRECT
case ZH_ESPNOW_ON_RECV_EVENT:;
zh_espnow_event_on_recv_t *recv_data = event_data;
if (recv_data->data_len != sizeof(zh_espnow_data_t) || sensor_config->hardware_config.battery_power == true)
{
goto ZH_ESPNOW_EVENT_HANDLER_EXIT;
}
#else
case ZH_NETWORK_ON_RECV_EVENT:;
zh_network_event_on_recv_t *recv_data = event_data;
if (recv_data->data_len != sizeof(zh_espnow_data_t) || sensor_config->hardware_config.battery_power == true)
{
goto ZH_NETWORK_EVENT_HANDLER_EXIT;
}
#endif
memcpy(&data, recv_data->data, recv_data->data_len);
switch (data.device_type)
{
case ZHDT_GATEWAY:
switch (data.payload_type)
{
case ZHPT_KEEP_ALIVE:
if (data.payload_data.keep_alive_message.online_status == ZH_ONLINE)
{
if (sensor_config->gateway_is_available == false)
{
sensor_config->gateway_is_available = true;
memcpy(sensor_config->gateway_mac, recv_data->mac_addr, 6);
zh_send_sensor_hardware_config_message(sensor_config);
if (sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED && sensor_config->hardware_config.sensor_type != HAST_NONE)
{
zh_send_sensor_config_message(sensor_config);
xTaskCreatePinnedToCore(&zh_send_sensor_status_message_task, "NULL", ZH_MESSAGE_STACK_SIZE, sensor_config, ZH_MESSAGE_TASK_PRIORITY, (TaskHandle_t *)&sensor_config->status_message_task, tskNO_AFFINITY);
xTaskCreatePinnedToCore(&zh_send_sensor_attributes_message_task, "NULL", ZH_MESSAGE_STACK_SIZE, sensor_config, ZH_MESSAGE_TASK_PRIORITY, (TaskHandle_t *)&sensor_config->attributes_message_task, tskNO_AFFINITY);
}
}
}
else
{
if (sensor_config->gateway_is_available == true)
{
sensor_config->gateway_is_available = false;
if (sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED && sensor_config->hardware_config.sensor_type != HAST_NONE)
{
vTaskDelete(sensor_config->status_message_task);
vTaskDelete(sensor_config->attributes_message_task);
}
}
}
break;
case ZHPT_HARDWARE:
sensor_config->hardware_config = data.payload_data.config_message.sensor_hardware_config_message;
zh_save_config(sensor_config);
esp_restart();
break;
case ZHPT_UPDATE:;
const esp_app_desc_t *app_info = get_app_description();
sensor_config->update_partition = esp_ota_get_next_update_partition(NULL);
zh_espnow_ota_message_t espnow_ota_message = {0};
espnow_ota_message.chip_type = ZH_CHIP_TYPE;
strcpy(espnow_ota_message.app_version, app_info->version);
#ifdef CONFIG_IDF_TARGET_ESP8266
char *app_name = (char *)heap_caps_malloc(strlen(app_info->project_name) + 6, MALLOC_CAP_8BIT);
memset(app_name, 0, strlen(app_info->project_name) + 6);
sprintf(app_name, "%s.app%d", app_info->project_name, sensor_config->update_partition->subtype - ESP_PARTITION_SUBTYPE_APP_OTA_0 + 1);
strcpy(espnow_ota_message.app_name, app_name);
heap_caps_free(app_name);
#else
strcpy(espnow_ota_message.app_name, app_info->project_name);
#endif
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_UPDATE;
data.payload_data = (zh_payload_data_t)espnow_ota_message;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
break;
case ZHPT_UPDATE_BEGIN:
#ifdef CONFIG_IDF_TARGET_ESP8266
esp_ota_begin(sensor_config->update_partition, OTA_SIZE_UNKNOWN, &sensor_config->update_handle);
#else
esp_ota_begin(sensor_config->update_partition, OTA_SIZE_UNKNOWN, (esp_ota_handle_t *)&sensor_config->update_handle);
#endif
sensor_config->ota_message_part_number = 1;
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_UPDATE_PROGRESS;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
break;
case ZHPT_UPDATE_PROGRESS:
if (sensor_config->ota_message_part_number == data.payload_data.espnow_ota_message.part)
{
++sensor_config->ota_message_part_number;
esp_ota_write(sensor_config->update_handle, (const void *)data.payload_data.espnow_ota_message.data, data.payload_data.espnow_ota_message.data_len);
}
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_UPDATE_PROGRESS;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
break;
case ZHPT_UPDATE_ERROR:
esp_ota_end(sensor_config->update_handle);
break;
case ZHPT_UPDATE_END:
if (esp_ota_end(sensor_config->update_handle) != ESP_OK)
{
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_UPDATE_FAIL;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
break;
}
esp_ota_set_boot_partition(sensor_config->update_partition);
data.device_type = ZHDT_SENSOR;
data.payload_type = ZHPT_UPDATE_SUCCESS;
zh_send_message(sensor_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
vTaskDelay(1000 / portTICK_PERIOD_MS);
esp_restart();
break;
case ZHPT_RESTART:
esp_restart();
break;
default:
break;
}
break;
default:
break;
}
#ifdef CONFIG_NETWORK_TYPE_DIRECT
ZH_ESPNOW_EVENT_HANDLER_EXIT:
heap_caps_free(recv_data->data);
break;
case ZH_ESPNOW_ON_SEND_EVENT:;
zh_espnow_event_on_send_t *send_data = event_data;
if (sensor_config->hardware_config.battery_power == false)
{
if (send_data->status == ZH_ESPNOW_SEND_FAIL && sensor_config->gateway_is_available == true)
{
sensor_config->gateway_is_available = false;
if (sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED && sensor_config->hardware_config.sensor_type != HAST_NONE)
{
vTaskDelete(sensor_config->status_message_task);
vTaskDelete(sensor_config->attributes_message_task);
}
}
}
else
{
++sensor_config->sent_message_quantity;
}
break;
#else
ZH_NETWORK_EVENT_HANDLER_EXIT:
heap_caps_free(recv_data->data);
break;
case ZH_NETWORK_ON_SEND_EVENT:;
zh_network_event_on_send_t *send_data = event_data;
if (sensor_config->hardware_config.battery_power == false)
{
if (send_data->status == ZH_NETWORK_SEND_FAIL && sensor_config->gateway_is_available == true)
{
sensor_config->gateway_is_available = false;
if (sensor_config->hardware_config.sensor_pin_1 != ZH_NOT_USED && sensor_config->hardware_config.sensor_type != HAST_NONE)
{
vTaskDelete(sensor_config->status_message_task);
vTaskDelete(sensor_config->attributes_message_task);
}
}
}
else
{
++sensor_config->sent_message_quantity;
}
break;
#endif
default:
break;
}
}
Reference in New Issue View Git Blame Copy Permalink