Version 2.2.0

Changed the frequency of sending messages.
Changed the event for the first start of tasks.

.gitmodules

@@ -1,18 +1,3 @@
-[submodule "components/zh_ds18b20"]
-	path = components/zh_ds18b20
-	url = https://github.com/aZholtikov/zh_ds18b20
-[submodule "components/zh_onewire"]
-	path = components/zh_onewire
-	url = https://github.com/aZholtikov/zh_onewire
-[submodule "components/zh_dht"]
-	path = components/zh_dht
-	url = https://github.com/aZholtikov/zh_dht
-[submodule "components/zh_network"]
-	path = components/zh_network
-	url = https://github.com/aZholtikov/zh_network
-[submodule "components/zh_vector"]
-	path = components/zh_vector
-	url = https://github.com/aZholtikov/zh_vector
 [submodule "components/zh_config"]
 	path = components/zh_config
 	url = https://github.com/aZholtikov/zh_config

README.md

@@ -1,30 +1,26 @@
 # ESP-NOW switch
 
-ESP-NOW based switch for ESP32 ESP-IDF and ESP8266 RTOS SDK. Alternate firmware for Tuya/SmartLife/eWeLink WiFi switches.
+ESP-NOW based switch for ESP32 ESP-IDF and ESP8266 RTOS_SDK. Alternate firmware for Tuya/SmartLife/eWeLink WiFi switches.
 
 ## Tested on
 
 1. ESP8266 RTOS_SDK v3.4
-2. ESP32 ESP-IDF v5.2
+2. ESP32 ESP-IDF v5.4
 
 ## Features
 
 1. Saves the last state when the power is turned off.
 2. Automatically adds switch configuration to Home Assistan via MQTT discovery as a switch.
 3. Update firmware from HTTPS server via ESP-NOW.
-4. Optional support one external 1-wire sensor (DS18B20/DHT11/DHT22/AM2302/AM2320).
-5. Direct or mesh work mode.
 
 ## Notes
 
-1. Work mode must be same with [gateway](https://github.com/aZholtikov/zh_gateway) work mode.
-2. ESP-NOW mesh network based on the [zh_network](https://github.com/aZholtikov/zh_network).
-3. For initial settings use "menuconfig -> ZH ESP-NOW Switch Configuration". After first boot all settings will be stored in NVS memory for prevente change during OTA firmware update.
-4. To restart the switch, send the "restart" command to the root topic of the switch (example - "homeassistant/espnow_switch/24-62-AB-F9-1F-A8").
-5. To update the switch firmware, send the "update" command to the root topic of the switch (example - "homeassistant/espnow_switch/70-03-9F-44-BE-F7"). The update path should be like as "https://your_server/zh_espnow_switch_esp32.bin" (for ESP32) or "https://your_server/zh_espnow_switch_esp8266.app1.bin + https://your_server/zh_espnow_switch_esp8266.app2.bin" (for ESP8266). Average update time is up to some minutes. The online status of the update will be displayed in the root switch topic.
-6. To change initial settings of the switch (except work mode), send the X1,X2,X3,X4,X5,X6,X7,X8,X9,X10 command to the hardware topic of the switch (example - "homeassistant/espnow_switch/70-03-9F-44-BE-F7/hardware"). The configuration will only be accepted if it does not cause errors. The current configuration status is displayed in the configuration topic of the switch (example - "homeassistant/espnow_switch/70-03-9F-44-BE-F7/config").
+1. For initial settings use "menuconfig -> ZH ESP-NOW Switch Configuration". After first boot all settings will be stored in NVS memory for prevente change during OTA firmware update.
+2. To restart the switch, send the "restart" command to the root topic of the switch (example - "homeassistant/espnow_switch/24-62-AB-F9-1F-A8").
+3. To update the switch firmware, send the "update" command to the root topic of the switch (example - "homeassistant/espnow_switch/70-03-9F-44-BE-F7"). The update path should be like as "https://your_server/zh_espnow_switch_esp32.bin" (for ESP32) or "https://your_server/zh_espnow_switch_esp8266.app1.bin + https://your_server/zh_espnow_switch_esp8266.app2.bin" (for ESP8266). Average update time is up to one minute. The status of the update will be displayed in the root switch topic.
+4. To change initial settings of the switch, send the X1,X2,X3,X4,X5,X6,X7,X8 command to the hardware topic of the switch (example - "homeassistant/espnow_switch/70-03-9F-44-BE-F7/hardware"). The configuration will only be accepted if it does not cause errors. The current configuration status is displayed in the configuration topic of the switch (example - "homeassistant/espnow_switch/70-03-9F-44-BE-F7/config").
 
-MQTT configuration message should filled according to the template "X1,X2,X3,X4,X5,X6,X7,X8,X9,X10". Where:
+MQTT configuration message should filled according to the template "X1,X2,X3,X4,X5,X6,X7,X8". Where:
 
 1. X1 - Relay GPIO number. 0 - 48 (according to the module used), 255 if not used.
 2. X2 - Relay ON level. 1 for high, 0 for low. Only affected when X1 is used.
@@ -34,8 +30,6 @@ MQTT configuration message should filled according to the template "X1,X2,X3,X4,
 6. X6 - Internal button trigger level. 1 for high, 0 for low. Only affected when X5 is used.
 7. X7 - External button GPIO number. 0 - 48 (according to the module used), 255 if not used.
 8. X8 - External button trigger level. 1 for high, 0 for low. Only affected when X7 is used.
-9. X9 - Sensor GPIO number. 0 - 48 (according to the module used). 255 if not used.
-10. X10 - Sensor type. 1 for DS18B20, 8 for DHT. Only affected when X9 is used.
 
 ## Build and flash
 

components/zh_config

@@ -1 +1 @@
-Subproject commit db717bf6eec149759082c00ecf2fca81faf94adf
+Subproject commit 73e8a70f4f17d10509d1a0cfe727230ec046aa79

components/zh_dht

@@ -1 +0,0 @@
-Subproject commit 7662593a30319809aa5160fa382689b675615f15

components/zh_ds18b20

@@ -1 +0,0 @@
-Subproject commit cbf2c69e4452378681d77e7f273b0489a8ffaa56

components/zh_espnow

@@ -1 +1 @@
-Subproject commit 39fdb2eb4968172ce16269d6b24ff1672c6f5351
+Subproject commit af7fa204e1f2793f6902948e27d57334839b2058

components/zh_network

@@ -1 +0,0 @@
-Subproject commit 10fefb2912a2489d4be23ba41eedae47290b0fc0

components/zh_onewire

@@ -1 +0,0 @@
-Subproject commit d006e1e40c44ac847c373f8458983031123bca90

components/zh_vector

@@ -1 +0,0 @@
-Subproject commit 53cdc7687388840c04470fb35e84e83b27175ae5

hardware/README.md

@@ -14,7 +14,7 @@
 
     Using MQTT:
 
-    "12,1,4,0,13,0,255,0,255,0"
+    "12,1,4,0,13,0,255,0"
 ```
 
 2. MINI 1CH 16A. Built on Tuya WiFi module WB2S (BK7231T chip). Replacement with ESP-02S (TYWE2S). [Photo](http://git.zh.com.ru/alexey.zholtikov/zh_espnow_switch/src/branch/main/hardware/MINI_1CH_16A).
@@ -29,11 +29,11 @@
     Internal button GPIO number     3
     Internal button trigger level   LOW
     External button GPIO number     14
-    External button trigger level   HIGH
+    External button trigger level   LOW
 
     Using MQTT:
 
-    "13,1,4,0,3,0,14,1,255,0"
+    "13,1,4,0,3,0,14,1"
 ```
 
 3. LIGHT E27 SOCKET. Built on Tuya WiFi module WA2 (WB2S) (BK7231T chip). Replacement with ESP-02S (TYWE2S). [Photo](http://git.zh.com.ru/alexey.zholtikov/zh_espnow_switch/src/branch/main/hardware/LIGHT_E27_SOCKET).
@@ -50,7 +50,7 @@
 
     Using MQTT:
 
-    "12,1,4,0,13,0,255,0,255,0"
+    "12,1,4,0,13,0,255,0"
 ```
 
 4. TH 1CH 16A + DS18B20. Built on ITEAD WiFi module PSF-B85 (ESP8285 chip). Replacement not required. [Photo](http://git.zh.com.ru/alexey.zholtikov/zh_espnow_switch/src/branch/main/hardware/TH_1CH_16A).
@@ -64,10 +64,8 @@
     Led ON level                    LOW
     Internal button GPIO number     0
     Internal button trigger level   LOW
-    Sensor GPIO number              14
-    Sensor type                     DS18B20
 
     Using MQTT:
 
-    "12,1,13,0,0,0,255,0,14,1"
+    "12,1,13,0,0,0,255,0"
 ```

main/Kconfig.projbuild

@@ -9,17 +9,6 @@ menu "ZH ESP-NOW Switch Configuration"
 		default 18 if IDF_TARGET_ESP32C2
 		default 19 if IDF_TARGET_ESP32C3
 		default 30 if IDF_TARGET_ESP32C6
-
-	choice NETWORK_TYPE
-		prompt "Network type"
-		help
-			Network type.
-		default NETWORK_TYPE_DIRECT
-		config NETWORK_TYPE_DIRECT
-			bool "DIRECT"
-		config NETWORK_TYPE_MESH
-			bool "MESH"
-	endchoice
 	
 	config RELAY_USING
 		bool "Enable using relay"
@@ -128,31 +117,4 @@ menu "ZH ESP-NOW Switch Configuration"
 			bool "LOW"
 	endchoice
 
-	config SENSOR_USING
-		depends on RELAY_USING
-		bool "Enable using external sensor"
-		default false
-		help
-			Enable using external sensor.
-
-	config SENSOR_PIN
-		depends on SENSOR_USING
-		int "Sensor GPIO number"
-		range 0 GPIO_RANGE_MAX
-		default 2
-		help
-			Sensor GPIO.
-
-	choice SENSOR_TYPE
-		depends on SENSOR_USING
-		prompt "Sensor type"
-		help
-			Sensor type.
-		default SENSOR_TYPE_DS18B20
-		config SENSOR_TYPE_DS18B20
-			bool "DS18B20"
-		config SENSOR_TYPE_DHT
-			bool "DHT"
-	endchoice
-
 endmenu 

main/zh_espnow_switch.c

@@ -15,23 +15,13 @@ void app_main(void)
     wifi_init_config_t wifi_init_config = WIFI_INIT_CONFIG_DEFAULT();
     esp_wifi_init(&wifi_init_config);
     esp_wifi_set_mode(WIFI_MODE_STA);
-#ifdef CONFIG_IDF_TARGET_ESP8266
-    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
-#else
-    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N | WIFI_PROTOCOL_LR);
-#endif
     esp_wifi_start();
-#ifdef CONFIG_NETWORK_TYPE_DIRECT
     zh_espnow_init_config_t espnow_init_config = ZH_ESPNOW_INIT_CONFIG_DEFAULT();
     zh_espnow_init(&espnow_init_config);
-#else
-    zh_network_init_config_t network_init_config = ZH_NETWORK_INIT_CONFIG_DEFAULT();
-    zh_network_init(&network_init_config);
-#endif
 #ifdef CONFIG_IDF_TARGET_ESP8266
-    esp_event_handler_register(ZH_EVENT, ESP_EVENT_ANY_ID, &zh_espnow_event_handler, switch_config);
+    esp_event_handler_register(ZH_ESPNOW, ESP_EVENT_ANY_ID, &zh_espnow_event_handler, switch_config);
 #else
-    esp_event_handler_instance_register(ZH_EVENT, ESP_EVENT_ANY_ID, &zh_espnow_event_handler, switch_config, NULL);
+    esp_event_handler_instance_register(ZH_ESPNOW, ESP_EVENT_ANY_ID, &zh_espnow_event_handler, switch_config, NULL);
     const esp_partition_t *running = esp_ota_get_running_partition();
     esp_ota_img_states_t ota_state = {0};
     esp_ota_get_state_partition(running, &ota_state);
@@ -50,8 +40,8 @@ void zh_load_config(switch_config_t *switch_config)
     uint8_t config_is_present = 0;
     if (nvs_get_u8(nvs_handle, "present", &config_is_present) == ESP_ERR_NVS_NOT_FOUND)
     {
-        nvs_set_u8(nvs_handle, "present", 0xFE);
         nvs_close(nvs_handle);
+    SETUP_INITIAL_SETTINGS:
 #ifdef CONFIG_RELAY_USING
         switch_config->hardware_config.relay_pin = CONFIG_RELAY_PIN;
 #else
@@ -91,37 +81,31 @@ void zh_load_config(switch_config_t *switch_config)
         switch_config->hardware_config.ext_button_on_level = ZH_HIGH;
 #else
         switch_config->hardware_config.ext_button_on_level = ZH_LOW;
-#endif
-#ifdef CONFIG_SENSOR_TYPE_DS18B20
-        switch_config->hardware_config.sensor_pin = CONFIG_SENSOR_PIN;
-        switch_config->hardware_config.sensor_type = HAST_DS18B20;
-#elif CONFIG_SENSOR_TYPE_DHT
-        switch_config->hardware_config.sensor_pin = CONFIG_SENSOR_PIN;
-        switch_config->hardware_config.sensor_type = HAST_DHT;
-#else
-        switch_config->hardware_config.sensor_pin = ZH_NOT_USED;
-        switch_config->hardware_config.sensor_type = HAST_NONE;
 #endif
         zh_save_config(switch_config);
         return;
     }
-    nvs_get_u8(nvs_handle, "relay_pin", &switch_config->hardware_config.relay_pin);
-    nvs_get_u8(nvs_handle, "relay_lvl", (uint8_t *)&switch_config->hardware_config.relay_on_level);
-    nvs_get_u8(nvs_handle, "led_pin", &switch_config->hardware_config.led_pin);
-    nvs_get_u8(nvs_handle, "led_lvl", (uint8_t *)&switch_config->hardware_config.led_on_level);
-    nvs_get_u8(nvs_handle, "int_btn_pin", &switch_config->hardware_config.int_button_pin);
-    nvs_get_u8(nvs_handle, "int_btn_lvl", (uint8_t *)&switch_config->hardware_config.int_button_on_level);
-    nvs_get_u8(nvs_handle, "ext_btn_pin", &switch_config->hardware_config.ext_button_pin);
-    nvs_get_u8(nvs_handle, "ext_btn_lvl", (uint8_t *)&switch_config->hardware_config.ext_button_on_level);
-    nvs_get_u8(nvs_handle, "sensor_pin", &switch_config->hardware_config.sensor_pin);
-    nvs_get_u8(nvs_handle, "sensor_type", (uint8_t *)&switch_config->hardware_config.sensor_type);
+    esp_err_t err = ESP_OK;
+    err += nvs_get_u8(nvs_handle, "relay_pin", &switch_config->hardware_config.relay_pin);
+    err += nvs_get_u8(nvs_handle, "relay_lvl", (uint8_t *)&switch_config->hardware_config.relay_on_level);
+    err += nvs_get_u8(nvs_handle, "led_pin", &switch_config->hardware_config.led_pin);
+    err += nvs_get_u8(nvs_handle, "led_lvl", (uint8_t *)&switch_config->hardware_config.led_on_level);
+    err += nvs_get_u8(nvs_handle, "int_btn_pin", &switch_config->hardware_config.int_button_pin);
+    err += nvs_get_u8(nvs_handle, "int_btn_lvl", (uint8_t *)&switch_config->hardware_config.int_button_on_level);
+    err += nvs_get_u8(nvs_handle, "ext_btn_pin", &switch_config->hardware_config.ext_button_pin);
+    err += nvs_get_u8(nvs_handle, "ext_btn_lvl", (uint8_t *)&switch_config->hardware_config.ext_button_on_level);
     nvs_close(nvs_handle);
+    if (err != ESP_OK)
+    {
+        goto SETUP_INITIAL_SETTINGS;
+    }
 }
 
 void zh_save_config(const switch_config_t *switch_config)
 {
     nvs_handle_t nvs_handle = 0;
     nvs_open("config", NVS_READWRITE, &nvs_handle);
+    nvs_set_u8(nvs_handle, "present", 0xFE);
     nvs_set_u8(nvs_handle, "relay_pin", switch_config->hardware_config.relay_pin);
     nvs_set_u8(nvs_handle, "relay_lvl", switch_config->hardware_config.relay_on_level);
     nvs_set_u8(nvs_handle, "led_pin", switch_config->hardware_config.led_pin);
@@ -130,8 +114,6 @@ void zh_save_config(const switch_config_t *switch_config)
     nvs_set_u8(nvs_handle, "int_btn_lvl", switch_config->hardware_config.int_button_on_level);
     nvs_set_u8(nvs_handle, "ext_btn_pin", switch_config->hardware_config.ext_button_pin);
     nvs_set_u8(nvs_handle, "ext_btn_lvl", switch_config->hardware_config.ext_button_on_level);
-    nvs_set_u8(nvs_handle, "sensor_pin", switch_config->hardware_config.sensor_pin);
-    nvs_set_u8(nvs_handle, "sensor_type", switch_config->hardware_config.sensor_type);
     nvs_close(nvs_handle);
 }
 
@@ -143,7 +125,6 @@ void zh_load_status(switch_config_t *switch_config)
     uint8_t status_is_present = 0;
     if (nvs_get_u8(nvs_handle, "present", &status_is_present) == ESP_ERR_NVS_NOT_FOUND)
     {
-        nvs_set_u8(nvs_handle, "present", 0xFE);
         nvs_close(nvs_handle);
         zh_save_status(switch_config);
         return;
@@ -156,6 +137,7 @@ void zh_save_status(const switch_config_t *switch_config)
 {
     nvs_handle_t nvs_handle = 0;
     nvs_open("status", NVS_READWRITE, &nvs_handle);
+    nvs_set_u8(nvs_handle, "present", 0xFE);
     nvs_set_u8(nvs_handle, "relay_state", switch_config->status.status);
     nvs_close(nvs_handle);
 }
@@ -176,7 +158,6 @@ void zh_gpio_init(switch_config_t *switch_config)
             switch_config->hardware_config.led_pin = ZH_NOT_USED;
             switch_config->hardware_config.int_button_pin = ZH_NOT_USED;
             switch_config->hardware_config.ext_button_pin = ZH_NOT_USED;
-            switch_config->hardware_config.sensor_pin = ZH_NOT_USED;
             return;
         }
         if (switch_config->hardware_config.led_pin != ZH_NOT_USED)
@@ -218,7 +199,7 @@ void zh_gpio_init(switch_config_t *switch_config)
         if (switch_config->hardware_config.int_button_pin != ZH_NOT_USED || switch_config->hardware_config.ext_button_pin != ZH_NOT_USED)
         {
             switch_config->button_pushing_semaphore = xSemaphoreCreateBinary();
-            xTaskCreatePinnedToCore(&zh_gpio_processing_task, "NULL", ZH_GPIO_STACK_SIZE, switch_config, ZH_GPIO_TASK_PRIORITY, NULL, tskNO_AFFINITY);
+            xTaskCreatePinnedToCore(&zh_gpio_processing_task, "gpio_processing_task", ZH_GPIO_STACK_SIZE, switch_config, ZH_GPIO_TASK_PRIORITY, NULL, tskNO_AFFINITY);
             gpio_install_isr_service(0);
             if (switch_config->hardware_config.int_button_pin != ZH_NOT_USED)
             {
@@ -229,30 +210,6 @@ void zh_gpio_init(switch_config_t *switch_config)
                 gpio_isr_handler_add(switch_config->hardware_config.ext_button_pin, zh_gpio_isr_handler, switch_config);
             }
         }
-        if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED)
-        {
-            switch (switch_config->hardware_config.sensor_type)
-            {
-            case HAST_DS18B20:
-                if (zh_onewire_init(switch_config->hardware_config.sensor_pin) != ESP_OK)
-                {
-                    switch_config->hardware_config.sensor_pin = ZH_NOT_USED;
-                }
-                break;
-            case HAST_DHT:;
-                zh_dht_init_config_t dht_init_config = ZH_DHT_INIT_CONFIG_DEFAULT();
-                dht_init_config.sensor_pin = switch_config->hardware_config.sensor_pin;
-                if (zh_dht_init(&dht_init_config) != ESP_OK)
-                {
-                    switch_config->hardware_config.sensor_pin = ZH_NOT_USED;
-                }
-                break;
-            default:
-                switch_config->hardware_config.sensor_type = HAST_NONE;
-                switch_config->hardware_config.sensor_pin = ZH_NOT_USED;
-                break;
-            }
-        }
     }
 }
 
@@ -282,7 +239,7 @@ void zh_gpio_set_level(switch_config_t *switch_config)
     }
 }
 
-void zh_gpio_isr_handler(void *arg)
+void IRAM_ATTR zh_gpio_isr_handler(void *arg)
 {
     switch_config_t *switch_config = arg;
     if (switch_config->gpio_processing == false)
@@ -301,10 +258,7 @@ void zh_gpio_processing_task(void *pvParameter)
         switch_config->status.status = (switch_config->status.status == HAONOFT_ON) ? HAONOFT_OFF : HAONOFT_ON;
         zh_gpio_set_level(switch_config);
         zh_save_status(switch_config);
-        if (switch_config->gateway_is_available == true)
-        {
-            zh_send_switch_status_message(switch_config);
-        }
+        zh_send_switch_status_message(switch_config);
         vTaskDelay(500 / portTICK_PERIOD_MS); // To prevent button contact rattling. Value is selected experimentally.
         switch_config->gpio_processing = false;
     }
@@ -329,14 +283,15 @@ void zh_send_switch_attributes_message_task(void *pvParameter)
         data.payload_data.attributes_message.heap_size = esp_get_free_heap_size();
         data.payload_data.attributes_message.min_heap_size = esp_get_minimum_free_heap_size();
         data.payload_data.attributes_message.uptime = esp_timer_get_time() / 1000000;
-        zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+        zh_espnow_send(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
         vTaskDelay(ZH_SWITCH_ATTRIBUTES_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
     }
     vTaskDelete(NULL);
 }
 
-void zh_send_switch_config_message(const switch_config_t *switch_config)
+void zh_send_switch_config_message_task(void *pvParameter)
 {
+    switch_config_t *switch_config = pvParameter;
     zh_espnow_data_t data = {0};
     data.device_type = ZHDT_SWITCH;
     data.payload_type = ZHPT_CONFIG;
@@ -348,11 +303,17 @@ void zh_send_switch_config_message(const switch_config_t *switch_config)
     data.payload_data.config_message.switch_config_message.optimistic = false;
     data.payload_data.config_message.switch_config_message.qos = 2;
     data.payload_data.config_message.switch_config_message.retain = true;
-    zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+    for (;;)
+    {
+        zh_espnow_send(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+        vTaskDelay(ZH_SWITCH_CONFIG_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
+    }
+    vTaskDelete(NULL);
 }
 
-void zh_send_switch_hardware_config_message(const switch_config_t *switch_config)
+void zh_send_switch_hardware_config_message_task(void *pvParameter)
 {
+    switch_config_t *switch_config = pvParameter;
     zh_espnow_data_t data = {0};
     data.device_type = ZHDT_SWITCH;
     data.payload_type = ZHPT_HARDWARE;
@@ -364,9 +325,12 @@ void zh_send_switch_hardware_config_message(const switch_config_t *switch_config
     data.payload_data.config_message.switch_hardware_config_message.int_button_on_level = switch_config->hardware_config.int_button_on_level;
     data.payload_data.config_message.switch_hardware_config_message.ext_button_pin = switch_config->hardware_config.ext_button_pin;
     data.payload_data.config_message.switch_hardware_config_message.ext_button_on_level = switch_config->hardware_config.ext_button_on_level;
-    data.payload_data.config_message.switch_hardware_config_message.sensor_pin = switch_config->hardware_config.sensor_pin;
-    data.payload_data.config_message.switch_hardware_config_message.sensor_type = switch_config->hardware_config.sensor_type;
-    zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+    for (;;)
+    {
+        zh_espnow_send(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+        vTaskDelay(ZH_SWITCH_HARDWARE_CONFIG_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
+    }
+    vTaskDelete(NULL);
 }
 
 void zh_send_switch_keep_alive_message_task(void *pvParameter)
@@ -379,142 +343,34 @@ void zh_send_switch_keep_alive_message_task(void *pvParameter)
     data.payload_data.keep_alive_message.message_frequency = ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY;
     for (;;)
     {
-        zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+        zh_espnow_send(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
         vTaskDelay(ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
     }
     vTaskDelete(NULL);
 }
 
+void zh_send_switch_status_message_task(void *pvParameter)
+{
+    switch_config_t *switch_config = pvParameter;
+    zh_espnow_data_t data = {0};
+    data.device_type = ZHDT_SWITCH;
+    data.payload_type = ZHPT_STATE;
+    for (;;)
+    {
+        data.payload_data.status_message.switch_status_message.status = switch_config->status.status;
+        zh_espnow_send(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
+        vTaskDelay(ZH_SWITCH_STATUS_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
+    }
+    vTaskDelete(NULL);
+}
+
 void zh_send_switch_status_message(const switch_config_t *switch_config)
 {
     zh_espnow_data_t data = {0};
     data.device_type = ZHDT_SWITCH;
     data.payload_type = ZHPT_STATE;
     data.payload_data.status_message.switch_status_message.status = switch_config->status.status;
-    zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-}
-
-void zh_send_sensor_config_message(const switch_config_t *switch_config)
-{
-    zh_espnow_data_t data = {0};
-    data.device_type = ZHDT_SENSOR;
-    data.payload_type = ZHPT_CONFIG;
-    data.payload_data.config_message.sensor_config_message.suggested_display_precision = 1;
-    data.payload_data.config_message.sensor_config_message.expire_after = ZH_SENSOR_STATUS_MESSAGE_FREQUENCY * 1.25; // + 25% just in case.
-    data.payload_data.config_message.sensor_config_message.enabled_by_default = true;
-    data.payload_data.config_message.sensor_config_message.force_update = true;
-    data.payload_data.config_message.sensor_config_message.qos = 2;
-    data.payload_data.config_message.sensor_config_message.retain = true;
-    char *unit_of_measurement = NULL;
-    // For compatibility with zh_espnow_sensor.
-    data.payload_data.config_message.sensor_config_message.unique_id = 2;
-    data.payload_data.config_message.sensor_config_message.sensor_device_class = HASDC_VOLTAGE;
-    unit_of_measurement = "V";
-    strcpy(data.payload_data.config_message.sensor_config_message.unit_of_measurement, unit_of_measurement);
-    zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-    // For compatibility with zh_espnow_sensor.
-    switch (switch_config->hardware_config.sensor_type)
-    {
-    case HAST_DS18B20:
-        data.payload_data.config_message.sensor_config_message.unique_id = 3;
-        data.payload_data.config_message.sensor_config_message.sensor_device_class = HASDC_TEMPERATURE;
-        unit_of_measurement = "°C";
-        strcpy(data.payload_data.config_message.sensor_config_message.unit_of_measurement, unit_of_measurement);
-        zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-        break;
-    case HAST_DHT:
-        data.payload_data.config_message.sensor_config_message.unique_id = 3;
-        data.payload_data.config_message.sensor_config_message.sensor_device_class = HASDC_TEMPERATURE;
-        unit_of_measurement = "°C";
-        strcpy(data.payload_data.config_message.sensor_config_message.unit_of_measurement, unit_of_measurement);
-        zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-        data.payload_data.config_message.sensor_config_message.unique_id = 4;
-        data.payload_data.config_message.sensor_config_message.sensor_device_class = HASDC_HUMIDITY;
-        unit_of_measurement = "%";
-        strcpy(data.payload_data.config_message.sensor_config_message.unit_of_measurement, unit_of_measurement);
-        zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-        break;
-    default:
-        break;
-    }
-}
-
-void zh_send_sensor_attributes_message_task(void *pvParameter)
-{
-    switch_config_t *switch_config = pvParameter;
-    const esp_app_desc_t *app_info = get_app_description();
-    zh_espnow_data_t data = {0};
-    data.device_type = ZHDT_SENSOR;
-    data.payload_type = ZHPT_ATTRIBUTES;
-    data.payload_data.attributes_message.chip_type = ZH_CHIP_TYPE;
-    data.payload_data.attributes_message.sensor_type = switch_config->hardware_config.sensor_type;
-    strcpy(data.payload_data.attributes_message.flash_size, CONFIG_ESPTOOLPY_FLASHSIZE);
-    data.payload_data.attributes_message.cpu_frequency = ZH_CPU_FREQUENCY;
-    data.payload_data.attributes_message.reset_reason = (uint8_t)esp_reset_reason();
-    strcpy(data.payload_data.attributes_message.app_name, app_info->project_name);
-    strcpy(data.payload_data.attributes_message.app_version, app_info->version);
-    for (;;)
-    {
-        data.payload_data.attributes_message.heap_size = esp_get_free_heap_size();
-        data.payload_data.attributes_message.min_heap_size = esp_get_minimum_free_heap_size();
-        data.payload_data.attributes_message.uptime = esp_timer_get_time() / 1000000;
-        zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-        vTaskDelay(ZH_SENSOR_ATTRIBUTES_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
-    }
-    vTaskDelete(NULL);
-}
-
-void zh_send_sensor_status_message_task(void *pvParameter)
-{
-    switch_config_t *switch_config = pvParameter;
-    float humidity = 0.0;
-    float temperature = 0.0;
-    zh_espnow_data_t data = {0};
-    data.device_type = ZHDT_SENSOR;
-    for (;;)
-    {
-        esp_err_t err = ESP_OK;
-        switch (switch_config->hardware_config.sensor_type)
-        {
-        case HAST_DS18B20:
-            err = zh_ds18b20_read(NULL, &temperature);
-            if (err == ESP_OK)
-            {
-                data.payload_data.status_message.sensor_status_message.temperature = temperature;
-                data.payload_data.status_message.sensor_status_message.voltage = 3.3; // For future development.
-            }
-            break;
-        case HAST_DHT:
-            err = zh_dht_read(&humidity, &temperature);
-            if (err == ESP_OK)
-            {
-                data.payload_data.status_message.sensor_status_message.humidity = humidity;
-                data.payload_data.status_message.sensor_status_message.temperature = temperature;
-                data.payload_data.status_message.sensor_status_message.voltage = 3.3; // For future development.
-            }
-            break;
-        default:
-            break;
-        }
-        if (err == ESP_OK)
-        {
-            data.payload_type = ZHPT_STATE;
-            data.payload_data.status_message.sensor_status_message.sensor_type = switch_config->hardware_config.sensor_type;
-            zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-        }
-        else
-        {
-            data.payload_type = ZHPT_ERROR;
-            char *message = (char *)heap_caps_malloc(150, MALLOC_CAP_8BIT);
-            memset(message, 0, 150);
-            sprintf(message, "Sensor %s reading error. Error - %s.", zh_get_sensor_type_value_name(switch_config->hardware_config.sensor_type), esp_err_to_name(err));
-            strcpy(data.payload_data.status_message.error_message.message, message);
-            zh_send_message(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
-            heap_caps_free(message);
-        }
-        vTaskDelay(ZH_SENSOR_STATUS_MESSAGE_FREQUENCY * 1000 / portTICK_PERIOD_MS);
-    }
-    vTaskDelete(NULL);
+    zh_espnow_send(switch_config->gateway_mac, (uint8_t *)&data, sizeof(zh_espnow_data_t));
 }
 
 void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data)
@@ -522,21 +378,12 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
     switch_config_t *switch_config = arg;
     switch (event_id)
     {
-#ifdef CONFIG_NETWORK_TYPE_DIRECT
     case ZH_ESPNOW_ON_RECV_EVENT:;
         zh_espnow_event_on_recv_t *recv_data = event_data;
         if (recv_data->data_len != sizeof(zh_espnow_data_t))
         {
             goto ZH_ESPNOW_EVENT_HANDLER_EXIT;
         }
-#else
-    case ZH_NETWORK_ON_RECV_EVENT:;
-        zh_network_event_on_recv_t *recv_data = event_data;
-        if (recv_data->data_len != sizeof(zh_espnow_data_t))
-        {
-            goto ZH_NETWORK_EVENT_HANDLER_EXIT;
-        }
-#endif
         zh_espnow_data_t *data = (zh_espnow_data_t *)recv_data->data;
         switch (data->device_type)
         {
@@ -544,61 +391,15 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
             switch (data->payload_type)
             {
             case ZHPT_KEEP_ALIVE:
-                if (data->payload_data.keep_alive_message.online_status == ZH_ONLINE)
+                memcpy(switch_config->gateway_mac, recv_data->mac_addr, 6);
+                if (is_first_boot == false)
                 {
-                    if (switch_config->gateway_is_available == false)
-                    {
-                        switch_config->gateway_is_available = true;
-                        memcpy(switch_config->gateway_mac, recv_data->mac_addr, 6);
-                        zh_send_switch_hardware_config_message(switch_config);
-                        if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                        {
-                            zh_send_switch_config_message(switch_config);
-                            zh_send_switch_status_message(switch_config);
-                            if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                            {
-                                zh_send_sensor_config_message(switch_config);
-                            }
-                            if (switch_config->is_first_connection == false)
-                            {
-                                xTaskCreatePinnedToCore(&zh_send_switch_attributes_message_task, "NULL", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, (TaskHandle_t *)&switch_config->switch_attributes_message_task, tskNO_AFFINITY);
-                                xTaskCreatePinnedToCore(&zh_send_switch_keep_alive_message_task, "NULL", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, (TaskHandle_t *)&switch_config->switch_keep_alive_message_task, tskNO_AFFINITY);
-                                if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                                {
-                                    xTaskCreatePinnedToCore(&zh_send_sensor_status_message_task, "NULL", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, (TaskHandle_t *)&switch_config->sensor_status_message_task, tskNO_AFFINITY);
-                                    xTaskCreatePinnedToCore(&zh_send_sensor_attributes_message_task, "NULL", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, (TaskHandle_t *)&switch_config->sensor_attributes_message_task, tskNO_AFFINITY);
-                                }
-                                switch_config->is_first_connection = true;
-                            }
-                            else
-                            {
-                                vTaskResume(switch_config->switch_attributes_message_task);
-                                vTaskResume(switch_config->switch_keep_alive_message_task);
-                                if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                                {
-                                    vTaskResume(switch_config->sensor_status_message_task);
-                                    vTaskResume(switch_config->sensor_attributes_message_task);
-                                }
-                            }
-                        }
-                    }
-                }
-                else
-                {
-                    if (switch_config->gateway_is_available == true)
-                    {
-                        switch_config->gateway_is_available = false;
-                        if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                        {
-                            vTaskSuspend(switch_config->switch_attributes_message_task);
-                            vTaskSuspend(switch_config->switch_keep_alive_message_task);
-                            if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                            {
-                                vTaskSuspend(switch_config->sensor_attributes_message_task);
-                                vTaskSuspend(switch_config->sensor_status_message_task);
-                            }
-                        }
-                    }
+                    is_first_boot = true;
+                    xTaskCreatePinnedToCore(&zh_send_switch_attributes_message_task, "switch_attributes_message_task", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, NULL, tskNO_AFFINITY);
+                    xTaskCreatePinnedToCore(&zh_send_switch_keep_alive_message_task, "switch_keep_alive_message_task", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, NULL, tskNO_AFFINITY);
+                    xTaskCreatePinnedToCore(&zh_send_switch_config_message_task, "switch_config_message_task", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, NULL, tskNO_AFFINITY);
+                    xTaskCreatePinnedToCore(&zh_send_switch_hardware_config_message_task, "switch_hardware_config_message_task", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, NULL, tskNO_AFFINITY);
+                    xTaskCreatePinnedToCore(&zh_send_switch_status_message_task, "switch_status_message_task", ZH_MESSAGE_STACK_SIZE, switch_config, ZH_MESSAGE_TASK_PRIORITY, NULL, tskNO_AFFINITY);
                 }
                 break;
             case ZHPT_SET:
@@ -616,44 +417,10 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
                 switch_config->hardware_config.int_button_on_level = data->payload_data.config_message.switch_hardware_config_message.int_button_on_level;
                 switch_config->hardware_config.ext_button_pin = data->payload_data.config_message.switch_hardware_config_message.ext_button_pin;
                 switch_config->hardware_config.ext_button_on_level = data->payload_data.config_message.switch_hardware_config_message.ext_button_on_level;
-                switch_config->hardware_config.sensor_pin = data->payload_data.config_message.switch_hardware_config_message.sensor_pin;
-                switch_config->hardware_config.sensor_type = data->payload_data.config_message.switch_hardware_config_message.sensor_type;
                 zh_save_config(switch_config);
-                switch_config->gateway_is_available = false;
-                if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                {
-                    vTaskDelete(switch_config->switch_attributes_message_task);
-                    vTaskDelete(switch_config->switch_keep_alive_message_task);
-                    if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                    {
-                        vTaskDelete(switch_config->sensor_attributes_message_task);
-                        vTaskDelete(switch_config->sensor_status_message_task);
-                    }
-                }
-                data->device_type = ZHDT_SWITCH;
-                data->payload_type = ZHPT_KEEP_ALIVE;
-                data->payload_data.keep_alive_message.online_status = ZH_OFFLINE;
-                data->payload_data.keep_alive_message.message_frequency = ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
-                vTaskDelay(1000 / portTICK_PERIOD_MS);
                 esp_restart();
                 break;
             case ZHPT_UPDATE:;
-                if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                {
-                    vTaskSuspend(switch_config->switch_attributes_message_task);
-                    vTaskSuspend(switch_config->switch_keep_alive_message_task);
-                    if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                    {
-                        vTaskSuspend(switch_config->sensor_attributes_message_task);
-                        vTaskSuspend(switch_config->sensor_status_message_task);
-                    }
-                }
-                data->device_type = ZHDT_SWITCH;
-                data->payload_type = ZHPT_KEEP_ALIVE;
-                data->payload_data.keep_alive_message.online_status = ZH_OFFLINE;
-                data->payload_data.keep_alive_message.message_frequency = ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
                 const esp_app_desc_t *app_info = get_app_description();
                 switch_config->update_partition = esp_ota_get_next_update_partition(NULL);
                 strcpy(data->payload_data.ota_message.espnow_ota_data.app_version, app_info->version);
@@ -667,7 +434,7 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
                 strcpy(data->payload_data.ota_message.espnow_ota_data.app_name, app_info->project_name);
 #endif
                 data->payload_type = ZHPT_UPDATE;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
+                zh_espnow_send(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
                 break;
             case ZHPT_UPDATE_BEGIN:
 #ifdef CONFIG_IDF_TARGET_ESP8266
@@ -678,7 +445,7 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
                 switch_config->ota_message_part_number = 1;
                 data->device_type = ZHDT_SWITCH;
                 data->payload_type = ZHPT_UPDATE_PROGRESS;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
+                zh_espnow_send(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
                 break;
             case ZHPT_UPDATE_PROGRESS:
                 if (switch_config->ota_message_part_number == data->payload_data.ota_message.espnow_ota_message.part)
@@ -688,63 +455,27 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
                 }
                 data->device_type = ZHDT_SWITCH;
                 data->payload_type = ZHPT_UPDATE_PROGRESS;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
+                zh_espnow_send(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
                 break;
             case ZHPT_UPDATE_ERROR:
                 esp_ota_end(switch_config->update_handle);
-                if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                {
-                    vTaskResume(switch_config->switch_attributes_message_task);
-                    vTaskResume(switch_config->switch_keep_alive_message_task);
-                    if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                    {
-                        vTaskResume(switch_config->sensor_attributes_message_task);
-                        vTaskResume(switch_config->sensor_status_message_task);
-                    }
-                }
                 break;
             case ZHPT_UPDATE_END:
                 if (esp_ota_end(switch_config->update_handle) != ESP_OK)
                 {
                     data->device_type = ZHDT_SWITCH;
                     data->payload_type = ZHPT_UPDATE_FAIL;
-                    zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
-                    if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                    {
-                        vTaskResume(switch_config->switch_attributes_message_task);
-                        vTaskResume(switch_config->switch_keep_alive_message_task);
-                        if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                        {
-                            vTaskResume(switch_config->sensor_attributes_message_task);
-                            vTaskResume(switch_config->sensor_status_message_task);
-                        }
-                    }
+                    zh_espnow_send(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
                     break;
                 }
                 esp_ota_set_boot_partition(switch_config->update_partition);
                 data->device_type = ZHDT_SWITCH;
                 data->payload_type = ZHPT_UPDATE_SUCCESS;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
+                zh_espnow_send(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
                 vTaskDelay(1000 / portTICK_PERIOD_MS);
                 esp_restart();
                 break;
             case ZHPT_RESTART:
-                if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-                {
-                    vTaskDelete(switch_config->switch_attributes_message_task);
-                    vTaskDelete(switch_config->switch_keep_alive_message_task);
-                    if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                    {
-                        vTaskDelete(switch_config->sensor_attributes_message_task);
-                        vTaskDelete(switch_config->sensor_status_message_task);
-                    }
-                }
-                data->device_type = ZHDT_SWITCH;
-                data->payload_type = ZHPT_KEEP_ALIVE;
-                data->payload_data.keep_alive_message.online_status = ZH_OFFLINE;
-                data->payload_data.keep_alive_message.message_frequency = ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY;
-                zh_send_message(switch_config->gateway_mac, (uint8_t *)data, sizeof(zh_espnow_data_t));
-                vTaskDelay(1000 / portTICK_PERIOD_MS);
                 esp_restart();
                 break;
             default:
@@ -754,49 +485,11 @@ void zh_espnow_event_handler(void *arg, esp_event_base_t event_base, int32_t eve
         default:
             break;
         }
-#ifdef CONFIG_NETWORK_TYPE_DIRECT
     ZH_ESPNOW_EVENT_HANDLER_EXIT:
         heap_caps_free(recv_data->data);
         break;
-    case ZH_ESPNOW_ON_SEND_EVENT:;
-        zh_espnow_event_on_send_t *send_data = event_data;
-        if (send_data->status == ZH_ESPNOW_SEND_FAIL && switch_config->gateway_is_available == true)
-        {
-            switch_config->gateway_is_available = false;
-            if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-            {
-                vTaskSuspend(switch_config->switch_attributes_message_task);
-                vTaskSuspend(switch_config->switch_keep_alive_message_task);
-                if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                {
-                    vTaskSuspend(switch_config->sensor_attributes_message_task);
-                    vTaskSuspend(switch_config->sensor_status_message_task);
-                }
-            }
-        }
+    case ZH_ESPNOW_ON_SEND_EVENT:
         break;
-#else
-    ZH_NETWORK_EVENT_HANDLER_EXIT:
-        heap_caps_free(recv_data->data);
-        break;
-    case ZH_NETWORK_ON_SEND_EVENT:;
-        zh_network_event_on_send_t *send_data = event_data;
-        if (send_data->status == ZH_NETWORK_SEND_FAIL && switch_config->gateway_is_available == true)
-        {
-            switch_config->gateway_is_available = false;
-            if (switch_config->hardware_config.relay_pin != ZH_NOT_USED)
-            {
-                vTaskSuspend(switch_config->switch_attributes_message_task);
-                vTaskSuspend(switch_config->switch_keep_alive_message_task);
-                if (switch_config->hardware_config.sensor_pin != ZH_NOT_USED && switch_config->hardware_config.sensor_type != HAST_NONE)
-                {
-                    vTaskSuspend(switch_config->sensor_attributes_message_task);
-                    vTaskSuspend(switch_config->sensor_status_message_task);
-                }
-            }
-        }
-        break;
-#endif
     default:
         break;
     }

main/zh_espnow_switch.h

@@ -8,19 +8,8 @@
 #include "driver/gpio.h"
 #include "esp_timer.h"
 #include "esp_ota_ops.h"
-#include "zh_ds18b20.h"
-#include "zh_dht.h"
-#include "zh_config.h"
-
-#ifdef CONFIG_NETWORK_TYPE_DIRECT
 #include "zh_espnow.h"
-#define zh_send_message(a, b, c) zh_espnow_send(a, b, c)
-#define ZH_EVENT ZH_ESPNOW
-#else
-#include "zh_network.h"
-#define zh_send_message(a, b, c) zh_network_send(a, b, c)
-#define ZH_EVENT ZH_NETWORK
-#endif
+#include "zh_config.h"
 
 #ifdef CONFIG_IDF_TARGET_ESP8266
 #define ZH_CHIP_TYPE HACHT_ESP8266
@@ -46,47 +35,42 @@
 #define get_app_description() esp_app_get_description()
 #endif
 
-#define ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY 10 // Frequency of sending a switch keep alive message to the gateway (in seconds).
-#define ZH_SWITCH_ATTRIBUTES_MESSAGE_FREQUENCY 60 // Frequency of sending a switch attributes message to the gateway (in seconds).
-#define ZH_SENSOR_STATUS_MESSAGE_FREQUENCY 60     // Frequency of sending a sensor status message to the gateway (in seconds).
-#define ZH_SENSOR_ATTRIBUTES_MESSAGE_FREQUENCY 60 // Frequency of sending a sensor attributes message to the gateway (in seconds).
+#define ZH_SWITCH_KEEP_ALIVE_MESSAGE_FREQUENCY 10      // Frequency of sending a switch keep alive message to the gateway (in seconds).
+#define ZH_SWITCH_ATTRIBUTES_MESSAGE_FREQUENCY 60      // Frequency of sending a switch attributes message to the gateway (in seconds).
+#define ZH_SWITCH_HARDWARE_CONFIG_MESSAGE_FREQUENCY 60 // Frequency of sending a switch hardware config message to the gateway (in seconds).
+#define ZH_SWITCH_CONFIG_MESSAGE_FREQUENCY 60          // Frequency of sending a switch config message to the gateway (in seconds).
+#define ZH_SWITCH_STATUS_MESSAGE_FREQUENCY 60          // Frequency of sending a switch status message to the gateway (in seconds).
 
-#define ZH_GPIO_TASK_PRIORITY 3    // Prioritize the task of GPIO processing.
+#define ZH_GPIO_TASK_PRIORITY 10   // Prioritize the task of GPIO processing.
 #define ZH_GPIO_STACK_SIZE 2048    // The stack size of the task of GPIO processing.
-#define ZH_MESSAGE_TASK_PRIORITY 2 // Prioritize the task of sending messages to the gateway.
+#define ZH_MESSAGE_TASK_PRIORITY 5 // Prioritize the task of sending messages to the gateway.
 #define ZH_MESSAGE_STACK_SIZE 2048 // The stack size of the task of sending messages to the gateway.
 
+static bool is_first_boot = false;
+
 typedef struct // Structure of data exchange between tasks, functions and event handlers.
 {
     struct // Storage structure of switch hardware configuration data.
     {
-        uint8_t relay_pin;            // Relay GPIO number.
-        bool relay_on_level;          // Relay ON level. @note HIGH (true) / LOW (false).
-        uint8_t led_pin;              // Led GPIO number (if present).
-        bool led_on_level;            // Led ON level (if present). @note HIGH (true) / LOW (false).
-        uint8_t int_button_pin;       // Internal button GPIO number (if present).
-        bool int_button_on_level;     // Internal button trigger level (if present). @note HIGH (true) / LOW (false).
-        uint8_t ext_button_pin;       // External button GPIO number (if present).
-        bool ext_button_on_level;     // External button trigger level (if present). @note HIGH (true) / LOW (false).
-        uint8_t sensor_pin;           // Sensor GPIO number (if present).
-        ha_sensor_type_t sensor_type; // Sensor types (if present). @note Used to identify the sensor type by ESP-NOW gateway and send the appropriate sensor status messages to MQTT.
+        uint8_t relay_pin;        // Relay GPIO number.
+        bool relay_on_level;      // Relay ON level. @note HIGH (true) / LOW (false).
+        uint8_t led_pin;          // Led GPIO number (if present).
+        bool led_on_level;        // Led ON level (if present). @note HIGH (true) / LOW (false).
+        uint8_t int_button_pin;   // Internal button GPIO number (if present).
+        bool int_button_on_level; // Internal button trigger level (if present). @note HIGH (true) / LOW (false).
+        uint8_t ext_button_pin;   // External button GPIO number (if present).
+        bool ext_button_on_level; // External button trigger level (if present). @note HIGH (true) / LOW (false).
     } hardware_config;
     struct // Storage structure of switch status data.
     {
-        ha_on_off_type_t status; // Status of the zh_espnow_switch. @note Example - ON / OFF. @attention Must be same with set on switch_config_message structure.
+        ha_on_off_type_t status; // Status of the zh_espnow_switch. @note Example - ON / OFF. @attention Must be same with set on switch_config_message structure (zh_config).
     } status;
-    volatile bool gpio_processing;               // GPIO processing flag. @note Used to prevent a repeated interrupt from triggering during GPIO processing.
-    volatile bool gateway_is_available;          // Gateway availability status flag. @note Used to control the tasks when the gateway connection is established / lost.
-    volatile bool is_first_connection;           // First connection status flag. @note Used to control the tasks when the gateway connection is established / lost.
-    uint8_t gateway_mac[6];                      // Gateway MAC address.
-    TaskHandle_t switch_attributes_message_task; // Unique task handle for zh_send_switsh_attributes_message_task().
-    TaskHandle_t switch_keep_alive_message_task; // Unique task handle for zh_send_switch_keep_alive_message_task().
-    TaskHandle_t sensor_attributes_message_task; // Unique task handle for zh_send_sensor_attributes_message_task().
-    TaskHandle_t sensor_status_message_task;     // Unique task handle for zh_send_sensor_status_message_task().
-    SemaphoreHandle_t button_pushing_semaphore;  // Unique semaphore handle for GPIO processing tasks.
-    const esp_partition_t *update_partition;     // Next update partition.
-    esp_ota_handle_t update_handle;              // Unique OTA handle.
-    uint16_t ota_message_part_number;            // The sequence number of the firmware upgrade part. @note Used to verify that all parts have been received.
+    volatile bool gpio_processing;              // GPIO processing flag. @note Used to prevent a repeated interrupt from triggering during GPIO processing.
+    uint8_t gateway_mac[6];                     // Gateway MAC address.
+    SemaphoreHandle_t button_pushing_semaphore; // Unique semaphore handle for GPIO processing tasks.
+    const esp_partition_t *update_partition;    // Next update partition.
+    esp_ota_handle_t update_handle;             // Unique OTA handle.
+    uint16_t ota_message_part_number;           // The sequence number of the firmware upgrade part. @note Used to verify that all parts have been received.
 } switch_config_t;
 
 /**
@@ -148,23 +132,23 @@ void zh_gpio_processing_task(void *pvParameter);
 /**
  * @brief Task for prepare the switch attributes message and sending it to the gateway.
  *
- * @param[in,out] pvParameter Pointer to structure of data exchange between tasks, functions and event handlers.
+ * @param[in] pvParameter Pointer to structure of data exchange between tasks, functions and event handlers.
  */
 void zh_send_switch_attributes_message_task(void *pvParameter);
 
 /**
- * @brief Function for prepare the switch configuration message and sending it to the gateway.
+ * @brief Task for prepare the switch configuration message and sending it to the gateway.
  *
- * @param[in] switch_config Pointer to the structure of data exchange between tasks, functions and event handlers.
+ * @param[in] pvParameter Pointer to the structure of data exchange between tasks, functions and event handlers.
  */
-void zh_send_switch_config_message(const switch_config_t *switch_config);
+void zh_send_switch_config_message_task(void *pvParameter);
 
 /**
- * @brief Function for prepare the switch hardware configuration message and sending it to the gateway.
+ * @brief Task for prepare the switch hardware configuration message and sending it to the gateway.
  *
- * @param[in] switch_config Pointer to the structure of data exchange between tasks, functions and event handlers.
+ * @param[in] pvParameter Pointer to the structure of data exchange between tasks, functions and event handlers.
  */
-void zh_send_switch_hardware_config_message(const switch_config_t *switch_config);
+void zh_send_switch_hardware_config_message_task(void *pvParameter);
 
 /**
  * @brief Task for prepare the switch keep alive message and sending it to the gateway.
@@ -173,6 +157,13 @@ void zh_send_switch_hardware_config_message(const switch_config_t *switch_config
  */
 void zh_send_switch_keep_alive_message_task(void *pvParameter);
 
+/**
+ * @brief Task for prepare the switch status message and sending it to the gateway.
+ *
+ * @param[in] pvParameter Pointer to the structure of data exchange between tasks, functions and event handlers.
+ */
+void zh_send_switch_status_message_task(void *pvParameter);
+
 /**
  * @brief Function for prepare the switch status message and sending it to the gateway.
  *
@@ -180,27 +171,6 @@ void zh_send_switch_keep_alive_message_task(void *pvParameter);
  */
 void zh_send_switch_status_message(const switch_config_t *switch_config);
 
-/**
- * @brief Function for prepare the sensor configuration message and sending it to the gateway.
- *
- * @param[in] switch_config Pointer to the structure of data exchange between tasks, functions and event handlers.
- */
-void zh_send_sensor_config_message(const switch_config_t *switch_config);
-
-/**
- * @brief Task for prepare the sensor attributes message and sending it to the gateway.
- *
- * @param[in] pvParameter Pointer to structure of data exchange between tasks, functions and event handlers.
- */
-void zh_send_sensor_attributes_message_task(void *pvParameter);
-
-/**
- * @brief Task for prepare the sensor status message and sending it to the gateway.
- *
- * @param[in] pvParameter Pointer to the structure of data exchange between tasks, functions and event handlers.
- */
-void zh_send_sensor_status_message_task(void *pvParameter);
-
 /**
  * @brief Function for ESP-NOW event processing.
  *

partitions_esp32c2.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,   Size, Flags
+# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
+nvs,      data, nvs,     ,        0x4000,
+otadata,  data, ota,     ,        0x2000,
+phy_init, data, phy,     ,        0x1000,
+ota_0,    app,  ota_0,   ,        900K,
+ota_1,    app,  ota_1,   ,        900K,

partitions_esp32c3.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,   Size, Flags
+# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
+nvs,      data, nvs,     ,        0x4000,
+otadata,  data, ota,     ,        0x2000,
+phy_init, data, phy,     ,        0x1000,
+ota_0,    app,  ota_0,   ,        1500K,
+ota_1,    app,  ota_1,   ,        1500K,

partitions_esp32c6.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,   Size, Flags
+# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
+nvs,      data, nvs,     ,        0x4000,
+otadata,  data, ota,     ,        0x2000,
+phy_init, data, phy,     ,        0x1000,
+ota_0,    app,  ota_0,   ,        1500K,
+ota_1,    app,  ota_1,   ,        1500K,

partitions_esp32s2.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,   Size, Flags
+# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
+nvs,      data, nvs,     ,        0x4000,
+otadata,  data, ota,     ,        0x2000,
+phy_init, data, phy,     ,        0x1000,
+ota_0,    app,  ota_0,   ,        1500K,
+ota_1,    app,  ota_1,   ,        1500K,

partitions_esp32s3.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,   Size, Flags
+# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
+nvs,      data, nvs,     ,        0x4000,
+otadata,  data, ota,     ,        0x2000,
+phy_init, data, phy,     ,        0x1000,
+ota_0,    app,  ota_0,   ,        1500K,
+ota_1,    app,  ota_1,   ,        1500K,

sdkconfig.defaults.esp32c2

@@ -0,0 +1,18 @@
+CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+
+CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
+
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_esp32c2.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_esp32c2.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+
+CONFIG_LOG_DEFAULT_LEVEL_NONE=y
+CONFIG_LOG_DEFAULT_LEVEL=0

sdkconfig.defaults.esp32c3

@@ -0,0 +1,18 @@
+CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_esp32c3.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_esp32c3.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+
+CONFIG_LOG_DEFAULT_LEVEL_NONE=y
+CONFIG_LOG_DEFAULT_LEVEL=0

sdkconfig.defaults.esp32c6

@@ -0,0 +1,18 @@
+CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_esp32c6.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_esp32c6.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+
+CONFIG_LOG_DEFAULT_LEVEL_NONE=y
+CONFIG_LOG_DEFAULT_LEVEL=0

sdkconfig.defaults.esp32s2

@@ -0,0 +1,18 @@
+CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_esp32s2.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_esp32s2.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+
+CONFIG_LOG_DEFAULT_LEVEL_NONE=y
+CONFIG_LOG_DEFAULT_LEVEL=0

sdkconfig.defaults.esp32s3

@@ -0,0 +1,18 @@
+CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_esp32s3.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions_esp32s3.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+
+CONFIG_LOG_DEFAULT_LEVEL_NONE=y
+CONFIG_LOG_DEFAULT_LEVEL=0

version.txt

@@ -1 +1 @@
-1.0.5
+2.2.0