feat!: removed esp8266 support

CMakeLists.txt

@@ -1,6 +1 @@
-if(${IDF_TARGET} STREQUAL esp8266)
-    set(requires driver zh_vector)
-else()
-    set(requires driver esp_event zh_vector)
-endif()
-idf_component_register(SRCS "zh_pcf8574.c" INCLUDE_DIRS "include" REQUIRES ${requires})
+idf_component_register(SRCS "zh_pcf8574.c" INCLUDE_DIRS "include" REQUIRES driver esp_event zh_vector)

README.md

@@ -1,9 +1,8 @@
-# ESP32 ESP-IDF and ESP8266 RTOS SDK component for PCF8574(A) 8-bit I/O expander
+# ESP32 ESP-IDF component for PCF8574(A) 8-bit I/O expander
 
 ## Tested on
 
-1. [ESP8266 RTOS_SDK v3.4](https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/index.html#)
-2. [ESP32 ESP-IDF v5.4](https://docs.espressif.com/projects/esp-idf/en/release-v5.4/esp32/index.html)
+1. [ESP32 ESP-IDF v5.5.1](https://docs.espressif.com/projects/esp-idf/en/v5.5.1/esp32/index.html)
 
 ## Features
 
@@ -15,11 +14,11 @@
 
 1. Enable interrupt support only if input GPIO's are used.
 2. All the INT GPIO's on the extenders must be connected to the one GPIO on ESP.
-3. The input GPIO's are always pullup to the power supply. They must be connected to ground to trigger an interrupt.
+3. The input GPIO's are always pullup to the power supply.
 
 ## Dependencies
 
-1. [zh_vector](http://git.zh.com.ru/alexey.zholtikov/zh_vector)
+1. [zh_vector](http://git.zh.com.ru/esp_components/zh_vector)
 
 ## Using
 
@@ -27,8 +26,8 @@ In an existing project, run the following command to install the components:
 
 ```text
 cd ../your_project/components
-git clone http://git.zh.com.ru/alexey.zholtikov/zh_pcf8574
-git clone http://git.zh.com.ru/alexey.zholtikov/zh_vector
+git clone http://git.zh.com.ru/esp_components/zh_pcf8574
+git clone http://git.zh.com.ru/esp_components/zh_vector
 ```
 
 In the application, add the component:
@@ -46,10 +45,7 @@ One expander on bus. All GPIO's as output (except P0 - input). Interrupt is enab
 
 #define I2C_PORT (I2C_NUM_MAX - 1)
 
-#ifndef CONFIG_IDF_TARGET_ESP8266
 i2c_master_bus_handle_t i2c_bus_handle = NULL;
-#endif
-
 zh_pcf8574_handle_t pcf8574_handle = {0};
 
 void zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data); // Required only if used input GPIO interrupts.
@@ -67,41 +63,21 @@ void print_gpio_status(const char *message, uint8_t reg)
 
 void app_main(void)
 {
-    esp_log_level_set("zh_pcf8574", ESP_LOG_NONE); // For ESP8266 first enable "Component config -> Log output -> Enable log set level" via menuconfig.
-    esp_log_level_set("zh_vector", ESP_LOG_NONE);  // For ESP8266 first enable "Component config -> Log output -> Enable log set level" via menuconfig.
-#ifdef CONFIG_IDF_TARGET_ESP8266
-    i2c_config_t i2c_config = {
-        .mode = I2C_MODE_MASTER,
-        .sda_io_num = GPIO_NUM_4, // In accordance with used chip.
-        .sda_pullup_en = GPIO_PULLUP_ENABLE,
-        .scl_io_num = GPIO_NUM_5, // In accordance with used chip.
-        .scl_pullup_en = GPIO_PULLUP_ENABLE,
-    };
-    i2c_driver_install(I2C_PORT, i2c_config.mode);
-    i2c_param_config(I2C_PORT, &i2c_config);
-#else
+    esp_log_level_set("zh_pcf8574", ESP_LOG_ERROR);
+    esp_log_level_set("zh_vector", ESP_LOG_ERROR);
     i2c_master_bus_config_t i2c_bus_config = {
         .clk_source = I2C_CLK_SRC_DEFAULT,
         .i2c_port = I2C_PORT,
-        .scl_io_num = GPIO_NUM_22, // In accordance with used chip.
-        .sda_io_num = GPIO_NUM_21, // In accordance with used chip.
+        .scl_io_num = GPIO_NUM_22,
+        .sda_io_num = GPIO_NUM_21,
         .glitch_ignore_cnt = 7,
         .flags.enable_internal_pullup = true,
     };
     i2c_new_master_bus(&i2c_bus_config, &i2c_bus_handle);
-#endif
-    esp_event_loop_create_default(); // Required only if used input GPIO interrupts.
-#ifdef CONFIG_IDF_TARGET_ESP8266
-    esp_event_handler_register(ZH_PCF8574, ESP_EVENT_ANY_ID, &zh_pcf8574_event_handler, NULL); // Required only if used input GPIO interrupts.
-#else
+    esp_event_loop_create_default();                                                                          // Required only if used input GPIO interrupts.
     esp_event_handler_instance_register(ZH_PCF8574, ESP_EVENT_ANY_ID, &zh_pcf8574_event_handler, NULL, NULL); // Required only if used input GPIO interrupts.
-#endif
     zh_pcf8574_init_config_t pcf8574_init_config = ZH_PCF8574_INIT_CONFIG_DEFAULT();
-#ifdef CONFIG_IDF_TARGET_ESP8266
-    pcf8574_init_config.i2c_port = I2C_PORT;
-#else
     pcf8574_init_config.i2c_handle = i2c_bus_handle;
-#endif
     pcf8574_init_config.i2c_address = 0x38;
     pcf8574_init_config.p0_gpio_work_mode = true;     // Required only for input GPIO.
     pcf8574_init_config.interrupt_gpio = GPIO_NUM_14; // Required only if used input GPIO interrupts.
@@ -133,6 +109,6 @@ void app_main(void)
 void zh_pcf8574_event_handler(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data) // Required only if used input GPIO interrupts.
 {
     zh_pcf8574_event_on_isr_t *event = event_data;
-    printf("Interrupt happened on device address 0x%02X on GPIO number %d.\n", event->i2c_address, event->gpio_number);
+    printf("Interrupt happened on device address 0x%02X on GPIO number %d at level %d.\n", event->i2c_address, event->gpio_number, event->gpio_level);
 }
 ```

include/zh_pcf8574.h

@@ -1,17 +1,20 @@
+/**
+ * @file zh_pcf8574.h
+ */
+
 #pragma once
 
 #include "esp_log.h"
 #include "driver/gpio.h"
-#ifdef CONFIG_IDF_TARGET_ESP8266
-#include "driver/i2c.h"
-#else
 #include "driver/i2c_master.h"
-#endif
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_event.h"
 #include "zh_vector.h"
 
+/**
+ * @brief PCF8574 expander initial default values.
+ */
 #define ZH_PCF8574_INIT_CONFIG_DEFAULT() \
     {                                    \
         .task_priority = 10,             \
@@ -25,54 +28,58 @@
         .p5_gpio_work_mode = 0,          \
         .p6_gpio_work_mode = 0,          \
         .p7_gpio_work_mode = 0,          \
-        .interrupt_gpio = GPIO_NUM_MAX,  \
-        .i2c_port = 0}
+        .interrupt_gpio = GPIO_NUM_MAX}
 
 #ifdef __cplusplus
 extern "C"
 {
 #endif
 
-    typedef struct // Structure for initial initialization of PCF8574 expander.
+    /**
+     * @brief Structure for initial initialization of PCF8574 expander.
+     */
+    typedef struct
     {
-        uint8_t task_priority;  // Task priority for the PCF8574 expander isr processing. @note It is not recommended to set a value less than 10.
-        uint16_t stack_size;    // Stack size for task for the PCF8574 expander isr processing processing. @note The minimum size is 2048 bytes.
-        uint8_t i2c_address;    // Expander I2C address.
-        bool p0_gpio_work_mode; // Expander GPIO PO work mode. True for input, false for output.
-        bool p1_gpio_work_mode; // Expander GPIO P1 work mode. True for input, false for output.
-        bool p2_gpio_work_mode; // Expander GPIO P2 work mode. True for input, false for output.
-        bool p3_gpio_work_mode; // Expander GPIO P3 work mode. True for input, false for output.
-        bool p4_gpio_work_mode; // Expander GPIO P4 work mode. True for input, false for output.
-        bool p5_gpio_work_mode; // Expander GPIO P5 work mode. True for input, false for output.
-        bool p6_gpio_work_mode; // Expander GPIO P6 work mode. True for input, false for output.
-        bool p7_gpio_work_mode; // Expander GPIO P7 work mode. True for input, false for output.
-        uint8_t interrupt_gpio; // Interrupt GPIO. @attention Must be same for all PCF8574 expanders.
-        bool i2c_port;          // I2C port. @attention Must be same for all PCF8574 expanders.
-#ifndef CONFIG_IDF_TARGET_ESP8266
-        i2c_master_bus_handle_t i2c_handle; // Unique I2C bus handle. @attention Must be same for all PCF8574 expanders.
-#endif
+        uint8_t task_priority;              /*!< Task priority for the PCF8574 expander isr processing. @note It is not recommended to set a value less than 10. */
+        uint16_t stack_size;                /*!< Stack size for task for the PCF8574 expander isr processing processing. @note The minimum size is 2048 bytes. */
+        uint8_t i2c_address;                /*!< Expander I2C address. */
+        bool p0_gpio_work_mode;             /*!< Expander GPIO PO work mode. True for input, false for output. */
+        bool p1_gpio_work_mode;             /*!< Expander GPIO P1 work mode. True for input, false for output. */
+        bool p2_gpio_work_mode;             /*!< Expander GPIO P2 work mode. True for input, false for output. */
+        bool p3_gpio_work_mode;             /*!< Expander GPIO P3 work mode. True for input, false for output. */
+        bool p4_gpio_work_mode;             /*!< Expander GPIO P4 work mode. True for input, false for output. */
+        bool p5_gpio_work_mode;             /*!< Expander GPIO P5 work mode. True for input, false for output. */
+        bool p6_gpio_work_mode;             /*!< Expander GPIO P6 work mode. True for input, false for output. */
+        bool p7_gpio_work_mode;             /*!< Expander GPIO P7 work mode. True for input, false for output. */
+        uint8_t interrupt_gpio;             /*!< Interrupt GPIO. @attention Must be same for all PCF8574 expanders. */
+        i2c_master_bus_handle_t i2c_handle; /*!< Unique I2C bus handle. @attention Must be same for all PCF8574 expanders. */
     } zh_pcf8574_init_config_t;
 
-    typedef struct // PCF8574 expander handle.
+    /**
+     * @brief PCF8574 expander handle.
+     */
+    typedef struct
     {
-        uint8_t i2c_address;    // Expander I2C address.
-        uint8_t gpio_work_mode; // Expander GPIO's work mode.
-        uint8_t gpio_status;    // Expander GPIO's status.
-        bool is_initialized;    // Expander initialization flag.
-        bool i2c_port;          // I2C port.
-#ifndef CONFIG_IDF_TARGET_ESP8266
-        i2c_master_bus_handle_t i2c_handle; // Unique I2C bus handle.
-        i2c_master_dev_handle_t dev_handle; // Unique I2C device handle.
-#endif
-        uint8_t system; // System variable for use in another components.
+        uint8_t i2c_address;                /*!< Expander I2C address. */
+        uint8_t gpio_work_mode;             /*!< Expander GPIO's work mode. */
+        uint8_t gpio_status;                /*!< Expander GPIO's status. */
+        bool is_initialized;                /*!< Expander initialization flag. */
+        i2c_master_dev_handle_t dev_handle; /*!< Unique I2C device handle. */
+        void *system;                       /*!< System pointer for use in another components. */
     } zh_pcf8574_handle_t;
 
     ESP_EVENT_DECLARE_BASE(ZH_PCF8574);
 
-    typedef struct // Structure for sending data to the event handler when cause an interrupt. @note Should be used with ZH_PCF8574W event base.
+    /**
+     * @brief Structure for sending data to the event handler when cause an interrupt.
+     *
+     * @note Should be used with ZH_PCF8574 event base.
+     */
+    typedef struct
     {
-        uint8_t i2c_address; // The i2c address of PCF8574 expander that caused the interrupt.
-        uint8_t gpio_number; // The GPIO that caused the interrupt.
+        uint8_t i2c_address; /*!< The i2c address of PCF8574 expander that caused the interrupt. */
+        uint8_t gpio_number; /*!< The GPIO that caused the interrupt. */
+        bool gpio_level;     /*!< The GPIO level that caused the interrupt. */
     } zh_pcf8574_event_on_isr_t;
 
     /**

version.txt

@@ -1 +1 @@
-1.1.0
+2.0.0

zh_pcf8574.c

@@ -2,27 +2,28 @@
 
 static const char *TAG = "zh_pcf8574";
 
-#define ZH_PCF8574_LOGI(msg, ...) ESP_LOGI(TAG, msg, ##__VA_ARGS__)
-#define ZH_PCF8574_LOGW(msg, ...) ESP_LOGW(TAG, msg, ##__VA_ARGS__)
-#define ZH_PCF8574_LOGE(msg, ...) ESP_LOGE(TAG, msg, ##__VA_ARGS__)
-#define ZH_PCF8574_LOGE_ERR(msg, err, ...) ESP_LOGE(TAG, "[%s:%d:%s] " msg, __FILE__, __LINE__, esp_err_to_name(err), ##__VA_ARGS__)
+#define ZH_LOGI(msg, ...) ESP_LOGI(TAG, msg, ##__VA_ARGS__)
+#define ZH_LOGE(msg, err, ...) ESP_LOGE(TAG, "[%s:%d:%s] " msg, __FILE__, __LINE__, esp_err_to_name(err), ##__VA_ARGS__)
 
-#define ZH_PCF8574_CHECK(cond, err, msg, ...) \
-    if (!(cond))                              \
-    {                                         \
-        ZH_PCF8574_LOGE_ERR(msg, err);        \
-        return err;                           \
+#define ZH_ERROR_CHECK(cond, err, cleanup, msg, ...) \
+    if (!(cond))                                     \
+    {                                                \
+        ZH_LOGE(msg, err, ##__VA_ARGS__);            \
+        cleanup;                                     \
+        return err;                                  \
     }
 
 static uint8_t _interrupt_gpio = GPIO_NUM_MAX;
 static SemaphoreHandle_t _interrupt_semaphore = NULL;
-static uint8_t _gpio_matrix[8] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
+static const uint8_t _gpio_matrix[8] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
 
 static zh_vector_t _vector = {0};
 
 static esp_err_t _zh_pcf8574_validate_config(const zh_pcf8574_init_config_t *config);
-static esp_err_t _zh_pcf8574_configure_i2c_device(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle);
-static esp_err_t _zh_pcf8574_configure_interrupts(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t handle);
+static esp_err_t _zh_pcf8574_gpio_init(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle);
+static esp_err_t _zh_pcf8574_i2c_init(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle);
+static esp_err_t _zh_pcf8574_resources_init(const zh_pcf8574_init_config_t *config);
+static esp_err_t _zh_pcf8574_task_init(const zh_pcf8574_init_config_t *config);
 static void _zh_pcf8574_isr_handler(void *arg);
 static void _zh_pcf8574_isr_processing_task(void *pvParameter);
 static esp_err_t _zh_pcf8574_read_register(zh_pcf8574_handle_t *handle, uint8_t *reg);
@@ -32,90 +33,141 @@ ESP_EVENT_DEFINE_BASE(ZH_PCF8574);
 
 esp_err_t zh_pcf8574_init(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle)
 {
-    ZH_PCF8574_LOGI("PCF8574 initialization started.");
-    ZH_PCF8574_CHECK(handle != NULL, ESP_ERR_INVALID_ARG, "PCF8574 initialization failed. Invalid argument.");
-    ZH_PCF8574_CHECK(handle->is_initialized == false, ESP_ERR_INVALID_STATE, "PCF8574 initialization failed. PCF8574 is already initialized.");
+    ZH_LOGI("PCF8574 initialization started.");
+    ZH_ERROR_CHECK(handle != NULL, ESP_ERR_INVALID_ARG, NULL, "PCF8574 initialization failed. Invalid argument.");
+    ZH_ERROR_CHECK(handle->is_initialized == false, ESP_ERR_INVALID_STATE, NULL, "PCF8574 initialization failed. PCF8574 is already initialized.");
     esp_err_t err = _zh_pcf8574_validate_config(config);
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "PCF8574 initialization failed. Initial configuration check failed.");
-    ZH_PCF8574_LOGI("PCF8574 initial configuration check completed successfully.");
-    err = _zh_pcf8574_configure_i2c_device(config, handle);
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "PCF8574 initialization failed. Failed to add I2C device.");
-    ZH_PCF8574_LOGI("PCF8574 add I2C device completed successfully.");
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 initialization failed. Initial configuration check failed.");
+    err = _zh_pcf8574_i2c_init(config, handle);
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 initialization failed. Failed to add I2C device.");
     err = _zh_pcf8574_write_register(handle, handle->gpio_work_mode);
-    if (err != ESP_OK)
-    {
-        handle->is_initialized = false;
-        ZH_PCF8574_LOGE_ERR("PCF8574 initialization failed. Failed GPIO setup.", err);
-        return err;
-    }
-    ZH_PCF8574_LOGI("GPIO setup completed successfully.");
+    ZH_ERROR_CHECK(err == ESP_OK, err, i2c_master_bus_rm_device(handle->dev_handle), "PCF8574 initialization failed. Failed extender initial GPIO setup.");
     if (config->interrupt_gpio < GPIO_NUM_MAX && handle->gpio_work_mode != 0)
     {
-        err = _zh_pcf8574_configure_interrupts(config, *handle);
-        if (err != ESP_OK)
-        {
-            handle->is_initialized = false;
-            ZH_PCF8574_LOGE_ERR("PCF8574 initialization failed. Interrupt setup failed.", err);
-            return err;
-        }
-        ZH_PCF8574_LOGI("Interrupt setup completed successfully.");
+        err = _zh_pcf8574_gpio_init(config, handle);
+        ZH_ERROR_CHECK(err == ESP_OK, err, i2c_master_bus_rm_device(handle->dev_handle), "PCF8574 initialization failed. Interrupt GPIO initialization failed.");
+        err = _zh_pcf8574_resources_init(config);
+        ZH_ERROR_CHECK(err == ESP_OK, err, i2c_master_bus_rm_device(handle->dev_handle); gpio_isr_handler_remove(config->interrupt_gpio); gpio_uninstall_isr_service();
+                       gpio_reset_pin(config->interrupt_gpio); zh_vector_free(&_vector), "PCF8574 initialization failed. Resources initialization failed.");
+        err = _zh_pcf8574_task_init(config);
+        ZH_ERROR_CHECK(err == ESP_OK, err, i2c_master_bus_rm_device(handle->dev_handle); gpio_isr_handler_remove(config->interrupt_gpio); gpio_uninstall_isr_service();
+                       gpio_reset_pin(config->interrupt_gpio); zh_vector_free(&_vector); vSemaphoreDelete(_interrupt_semaphore), "PCF8574 initialization failed. Task initialization failed.");
     }
     handle->is_initialized = true;
-    ZH_PCF8574_LOGI("PCF8574 initialization completed successfully.");
+    ZH_LOGI("PCF8574 initialization completed successfully.");
     return ESP_OK;
 }
 
 esp_err_t zh_pcf8574_read(zh_pcf8574_handle_t *handle, uint8_t *reg)
 {
-    return _zh_pcf8574_read_register(handle, reg);
+    ZH_LOGI("PCF8574 read register started.");
+    ZH_ERROR_CHECK(handle != NULL || reg != NULL, ESP_ERR_INVALID_ARG, NULL, "PCF8574 read register failed. Invalid argument.");
+    ZH_ERROR_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, NULL, "PCF8574 read register failed. PCF8574 not initialized.");
+    esp_err_t err = _zh_pcf8574_read_register(handle, reg);
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 read register failed.");
+    ZH_LOGI("PCF8574 read register completed successfully.");
+    return ESP_OK;
 }
 
 esp_err_t zh_pcf8574_write(zh_pcf8574_handle_t *handle, uint8_t reg)
 {
-    return _zh_pcf8574_write_register(handle, (reg | handle->gpio_work_mode));
+    ZH_LOGI("PCF8574 write register started.");
+    ZH_ERROR_CHECK(handle != NULL, ESP_ERR_INVALID_ARG, NULL, "PCF8574 write register failed. Invalid argument.");
+    ZH_ERROR_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, NULL, "PCF8574 write register failed. PCF8574 not initialized.");
+    esp_err_t err = _zh_pcf8574_write_register(handle, (reg | handle->gpio_work_mode));
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 write register failed.");
+    ZH_LOGI("PCF8574 write register completed successfully.");
+    return ESP_OK;
 }
 
 esp_err_t zh_pcf8574_reset(zh_pcf8574_handle_t *handle)
 {
-    return _zh_pcf8574_write_register(handle, handle->gpio_work_mode);
+    ZH_LOGI("PCF8574 reset register started.");
+    ZH_ERROR_CHECK(handle != NULL, ESP_ERR_INVALID_ARG, NULL, "PCF8574 reset register failed. Invalid argument.");
+    ZH_ERROR_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, NULL, "PCF8574 reset register failed. PCF8574 not initialized.");
+    esp_err_t err = _zh_pcf8574_write_register(handle, handle->gpio_work_mode);
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 reset register failed.");
+    ZH_LOGI("PCF8574 reset register completed successfully.");
+    return ESP_OK;
 }
 
 esp_err_t zh_pcf8574_read_gpio(zh_pcf8574_handle_t *handle, uint8_t gpio, bool *status)
 {
-    ZH_PCF8574_CHECK(gpio <= 7, ESP_FAIL, "Invalid GPIO number.")
+    ZH_LOGI("PCF8574 read GPIO started.");
+    ZH_ERROR_CHECK(handle != NULL || status != NULL, ESP_ERR_INVALID_ARG, NULL, "PCF8574 read GPIO failed. Invalid argument.");
+    ZH_ERROR_CHECK(gpio <= 7, ESP_FAIL, NULL, "PCF8574 read GPIO failed. Invalid GPIO number.")
+    ZH_ERROR_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, NULL, "PCF8574 read GPIO failed. PCF8574 not initialized.");
     uint8_t gpio_temp = _gpio_matrix[gpio];
     uint8_t reg_temp = 0;
     esp_err_t err = _zh_pcf8574_read_register(handle, &reg_temp);
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 read GPIO failed.");
     *status = ((reg_temp & gpio_temp) ? 1 : 0);
-    return err;
+    ZH_LOGI("PCF8574 read GPIO completed successfully.");
+    return ESP_OK;
 }
 
 esp_err_t zh_pcf8574_write_gpio(zh_pcf8574_handle_t *handle, uint8_t gpio, bool status)
 {
-    ZH_PCF8574_CHECK(gpio <= 7, ESP_FAIL, "Invalid GPIO number.")
+    ZH_LOGI("PCF8574 write GPIO started.");
+    ZH_ERROR_CHECK(handle != NULL, ESP_ERR_INVALID_ARG, NULL, "PCF8574 write GPIO failed. Invalid argument.");
+    ZH_ERROR_CHECK(gpio <= 7, ESP_FAIL, NULL, "PCF8574 write GPIO failed. Invalid GPIO number.")
+    ZH_ERROR_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, NULL, "PCF8574 write GPIO failed. PCF8574 not initialized.");
     uint8_t gpio_temp = _gpio_matrix[gpio];
+    esp_err_t err = ESP_OK;
     if (status == true)
     {
-        return _zh_pcf8574_write_register(handle, handle->gpio_status | handle->gpio_work_mode | gpio_temp);
+        err = _zh_pcf8574_write_register(handle, handle->gpio_status | handle->gpio_work_mode | gpio_temp);
     }
-    return _zh_pcf8574_write_register(handle, (handle->gpio_status ^ gpio_temp) | handle->gpio_work_mode);
+    else
+    {
+        err = _zh_pcf8574_write_register(handle, (handle->gpio_status ^ gpio_temp) | handle->gpio_work_mode);
+    }
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "PCF8574 write GPIO failed.");
+    ZH_LOGI("PCF8574 write GPIO completed successfully.");
+    return ESP_OK;
 }
 
 static esp_err_t _zh_pcf8574_validate_config(const zh_pcf8574_init_config_t *config)
 {
-    ZH_PCF8574_CHECK(config != NULL, ESP_ERR_INVALID_ARG, "Invalid configuration.");
-    ZH_PCF8574_CHECK((config->i2c_address >= 0x20 && config->i2c_address <= 0x27) || (config->i2c_address >= 0x38 && config->i2c_address <= 0x3F), ESP_ERR_INVALID_ARG, "Invalid I2C address.");
-    ZH_PCF8574_CHECK(config->task_priority >= 10 && config->stack_size >= 2048, ESP_ERR_INVALID_ARG, "Invalid task settings.");
-    ZH_PCF8574_CHECK(config->interrupt_gpio >= 0 && config->interrupt_gpio <= GPIO_NUM_MAX, ESP_ERR_INVALID_ARG, "Invalid GPIO number.");
-#ifndef CONFIG_IDF_TARGET_ESP8266
-    ZH_PCF8574_CHECK(config->i2c_handle != NULL, ESP_ERR_INVALID_ARG, "Invalid I2C handle.");
-#endif
+    ZH_ERROR_CHECK(config != NULL, ESP_ERR_INVALID_ARG, NULL, "Initial config is NULL.");
+    ZH_ERROR_CHECK((config->i2c_address >= 0x20 && config->i2c_address <= 0x27) || (config->i2c_address >= 0x38 && config->i2c_address <= 0x3F), ESP_ERR_INVALID_ARG, NULL, "Invalid I2C address.");
+    ZH_ERROR_CHECK(config->task_priority >= 10 && config->stack_size >= 2048, ESP_ERR_INVALID_ARG, NULL, "Invalid task settings.");
+    ZH_ERROR_CHECK(config->interrupt_gpio >= GPIO_NUM_0 && config->interrupt_gpio <= GPIO_NUM_MAX, ESP_ERR_INVALID_ARG, NULL, "Invalid GPIO number.");
+    ZH_ERROR_CHECK(config->i2c_handle != NULL, ESP_ERR_INVALID_ARG, NULL, "Invalid I2C handle.");
     return ESP_OK;
 }
 
-static esp_err_t _zh_pcf8574_configure_i2c_device(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle)
+static esp_err_t _zh_pcf8574_gpio_init(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle)
+{
+    if (_interrupt_gpio != GPIO_NUM_MAX)
+    {
+        esp_err_t err = zh_vector_push_back(&_vector, handle);
+        ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "Failed add item to vector.")
+        return ESP_OK;
+    }
+    esp_err_t err = zh_vector_init(&_vector, sizeof(zh_pcf8574_handle_t));
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "Failed create vector.")
+    err = zh_vector_push_back(&_vector, handle);
+    ZH_ERROR_CHECK(err == ESP_OK, err, zh_vector_free(&_vector), "Failed add item to vector.")
+    gpio_config_t interrupt_gpio_config = {
+        .intr_type = GPIO_INTR_NEGEDGE,
+        .mode = GPIO_MODE_INPUT,
+        .pin_bit_mask = (1ULL << config->interrupt_gpio),
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .pull_up_en = GPIO_PULLUP_ENABLE,
+    };
+    err = gpio_config(&interrupt_gpio_config);
+    ZH_ERROR_CHECK(err == ESP_OK, err, zh_vector_free(&_vector), "GPIO configuration failed.")
+    err = gpio_install_isr_service(ESP_INTR_FLAG_LOWMED);
+    ZH_ERROR_CHECK(err == ESP_OK, err, gpio_reset_pin(config->interrupt_gpio); zh_vector_free(&_vector), "Failed install isr service.")
+    err = gpio_isr_handler_add(config->interrupt_gpio, _zh_pcf8574_isr_handler, NULL);
+    ZH_ERROR_CHECK(err == ESP_OK, err, gpio_uninstall_isr_service(); gpio_reset_pin(config->interrupt_gpio); zh_vector_free(&_vector), "Failed add isr handler.")
+    _interrupt_gpio = config->interrupt_gpio;
+    return ESP_OK;
+}
+
+static esp_err_t _zh_pcf8574_i2c_init(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t *handle)
 {
-#ifndef CONFIG_IDF_TARGET_ESP8266
     i2c_device_config_t pcf8574_config = {
         .dev_addr_length = I2C_ADDR_BIT_LEN_7,
         .device_address = config->i2c_address,
@@ -123,76 +175,29 @@ static esp_err_t _zh_pcf8574_configure_i2c_device(const zh_pcf8574_init_config_t
     };
     i2c_master_dev_handle_t _dev_handle = NULL;
     esp_err_t err = i2c_master_bus_add_device(config->i2c_handle, &pcf8574_config, &_dev_handle);
-    if (err != ESP_OK)
-    {
-        ZH_PCF8574_LOGE_ERR("Failed to add I2C device.", err);
-        i2c_master_bus_rm_device(_dev_handle);
-        handle->dev_handle = NULL;
-        return err;
-    }
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL;, "Failed to add I2C device.");
     err = i2c_master_probe(config->i2c_handle, config->i2c_address, 1000 / portTICK_PERIOD_MS);
-    if (err != ESP_OK)
-    {
-        ZH_PCF8574_LOGE_ERR("Expander not connected or not responding.", err);
-        i2c_master_bus_rm_device(_dev_handle);
-        handle->dev_handle = NULL;
-        return err;
-    }
-    handle->i2c_handle = config->i2c_handle;
+    ZH_ERROR_CHECK(err == ESP_OK, err, i2c_master_bus_rm_device(_dev_handle), "Expander not connected or not responding.");
     handle->dev_handle = _dev_handle;
-#endif
     handle->gpio_work_mode = (config->p7_gpio_work_mode << 7) | (config->p6_gpio_work_mode << 6) | (config->p5_gpio_work_mode << 5) |
                              (config->p4_gpio_work_mode << 4) | (config->p3_gpio_work_mode << 3) | (config->p2_gpio_work_mode << 2) |
                              (config->p1_gpio_work_mode << 1) | (config->p0_gpio_work_mode << 0);
     handle->gpio_status = handle->gpio_work_mode;
     handle->i2c_address = config->i2c_address;
-    handle->i2c_port = config->i2c_port;
-    handle->is_initialized = true;
     return ESP_OK;
 }
 
-static esp_err_t _zh_pcf8574_configure_interrupts(const zh_pcf8574_init_config_t *config, zh_pcf8574_handle_t handle)
+static esp_err_t _zh_pcf8574_resources_init(const zh_pcf8574_init_config_t *config)
 {
-    if (_interrupt_gpio != GPIO_NUM_MAX)
-    {
-        esp_err_t err = zh_vector_push_back(&_vector, &handle);
-        ZH_PCF8574_CHECK(err == ESP_OK, err, "Failed add item to vector.")
-        return ESP_OK;
-    }
-    _interrupt_gpio = config->interrupt_gpio;
-    esp_err_t err = zh_vector_init(&_vector, sizeof(zh_pcf8574_handle_t));
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "Failed create vector.")
-    err = zh_vector_push_back(&_vector, &handle);
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "Failed add item to vector.")
-    gpio_config_t isr_pin_config = {
-        .intr_type = GPIO_INTR_NEGEDGE,
-        .mode = GPIO_MODE_INPUT,
-        .pin_bit_mask = (1ULL << _interrupt_gpio),
-        .pull_down_en = GPIO_PULLDOWN_DISABLE,
-        .pull_up_en = GPIO_PULLUP_ENABLE,
-    };
-    err = gpio_config(&isr_pin_config);
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "GPIO configuration failed.")
-    err = gpio_install_isr_service(0);
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "Failed install isr service.")
-    err = gpio_isr_handler_add(_interrupt_gpio, _zh_pcf8574_isr_handler, NULL);
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "Failed add isr handler.")
     _interrupt_semaphore = xSemaphoreCreateBinary();
-    ZH_PCF8574_CHECK(_interrupt_semaphore != NULL, ESP_ERR_NO_MEM, "Failed to create semaphore.")
-    BaseType_t x_err = xTaskCreatePinnedToCore(
-        &_zh_pcf8574_isr_processing_task,
-        "_zh_pcf8574_isr_processing_task",
-        config->stack_size,
-        NULL,
-        config->task_priority,
-        NULL,
-        tskNO_AFFINITY);
-    if (x_err != pdPASS)
-    {
-        ZH_PCF8574_LOGE("Failed to create isr processing task.");
-        vSemaphoreDelete(_interrupt_semaphore);
-        return ESP_FAIL;
-    }
+    ZH_ERROR_CHECK(_interrupt_semaphore != NULL, ESP_ERR_NO_MEM, NULL, "Failed to create semaphore.")
+    return ESP_OK;
+}
+
+static esp_err_t _zh_pcf8574_task_init(const zh_pcf8574_init_config_t *config)
+{
+    BaseType_t err = xTaskCreatePinnedToCore(&_zh_pcf8574_isr_processing_task, "zh_pcf8574_isr_processing_task", config->stack_size, NULL, config->task_priority, NULL, tskNO_AFFINITY);
+    ZH_ERROR_CHECK(err == pdPASS, err, NULL, "Failed to create isr processing task.")
     return ESP_OK;
 }
 
@@ -211,87 +216,62 @@ static void IRAM_ATTR _zh_pcf8574_isr_processing_task(void *pvParameter)
     for (;;)
     {
         xSemaphoreTake(_interrupt_semaphore, portMAX_DELAY);
-        ZH_PCF8574_LOGI("PCF8574 isr processing begin.");
         for (uint16_t i = 0; i < zh_vector_get_size(&_vector); ++i)
         {
             zh_pcf8574_handle_t *handle = zh_vector_get_item(&_vector, i);
             if (handle == NULL)
             {
-                ZH_PCF8574_LOGE("PCF8574 isr processing failed. Failed to get vector item data.");
+                ZH_LOGE("PCF8574 isr processing failed. Failed to get vector item data.", ESP_FAIL);
                 continue;
             }
             zh_pcf8574_event_on_isr_t event = {0};
             event.i2c_address = handle->i2c_address;
             event.gpio_number = 0xFF;
-            uint8_t reg_temp = 0;
-            esp_err_t err = _zh_pcf8574_read_register(handle, &reg_temp);
+            uint8_t old_reg = handle->gpio_status;
+            uint8_t new_reg = 0;
+            esp_err_t err = _zh_pcf8574_read_register(handle, &new_reg);
             if (err != ESP_OK)
             {
-                ZH_PCF8574_LOGE_ERR("PCF8574 isr processing failed. Failed to read expander register.", err);
+                ZH_LOGE("PCF8574 isr processing failed. Failed to read expander register.", err);
                 continue;
             }
             for (uint8_t j = 0; j <= 7; ++j)
             {
-                if (((handle->gpio_work_mode & _gpio_matrix[j]) != 0) && ((reg_temp & _gpio_matrix[j]) == 0))
+                if ((handle->gpio_work_mode & _gpio_matrix[j]) != 0)
                 {
-                    event.gpio_number = j;
-                    break;
+                    if ((old_reg & _gpio_matrix[j]) != (new_reg & _gpio_matrix[j]))
+                    {
+                        event.gpio_number = j;
+                        event.gpio_level = new_reg & _gpio_matrix[j];
+                    }
                 }
             }
             if (event.gpio_number != 0xFF)
             {
-                err = esp_event_post(ZH_PCF8574, 0, &event, sizeof(event), portTICK_PERIOD_MS);
+                err = esp_event_post(ZH_PCF8574, 0, &event, sizeof(event), 1000 / portTICK_PERIOD_MS);
                 if (err != ESP_OK)
                 {
-                    ZH_PCF8574_LOGE_ERR("PCF8574 isr processing failed. Failed to post interrupt event.", err);
+                    ZH_LOGE("PCF8574 isr processing failed. Failed to post interrupt event.", err);
+                    continue;
                 }
             }
         }
-        ZH_PCF8574_LOGI("PCF8574 isr processing completed successfully.");
     }
     vTaskDelete(NULL);
 }
 
 static esp_err_t _zh_pcf8574_read_register(zh_pcf8574_handle_t *handle, uint8_t *reg)
 {
-    ZH_PCF8574_LOGI("PCF8574 read started.");
-    ZH_PCF8574_CHECK(handle != NULL || reg != NULL, ESP_ERR_INVALID_ARG, "PCF8574 read failed. Invalid argument.");
-    ZH_PCF8574_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, "PCF8574 read failed. PCF8574 not initialized.");
-#ifdef CONFIG_IDF_TARGET_ESP8266
-    i2c_cmd_handle_t i2c_cmd_handle = i2c_cmd_link_create();
-    i2c_master_start(i2c_cmd_handle);
-    i2c_master_write_byte(i2c_cmd_handle, handle->i2c_address << 1 | I2C_MASTER_READ, true);
-    i2c_master_read_byte(i2c_cmd_handle, &handle->gpio_status, I2C_MASTER_NACK);
-    i2c_master_stop(i2c_cmd_handle);
-    esp_err_t err = i2c_master_cmd_begin(handle->i2c_port, i2c_cmd_handle, 1000 / portTICK_PERIOD_MS);
-    i2c_cmd_link_delete(i2c_cmd_handle);
-#else
     esp_err_t err = i2c_master_receive(handle->dev_handle, &handle->gpio_status, sizeof(handle->gpio_status), 1000 / portTICK_PERIOD_MS);
-#endif
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "PCF8574 read failed. I2C driver error.");
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "I2C driver error.");
     *reg = handle->gpio_status;
-    ZH_PCF8574_LOGI("PCF8574 read completed successfully.");
     return ESP_OK;
 }
 
 static esp_err_t _zh_pcf8574_write_register(zh_pcf8574_handle_t *handle, uint8_t reg)
 {
-    ZH_PCF8574_LOGI("PCF8574 write started.");
-    ZH_PCF8574_CHECK(handle != NULL, ESP_ERR_INVALID_ARG, "PCF8574 write failed. Invalid argument.");
-    ZH_PCF8574_CHECK(handle->is_initialized == true, ESP_ERR_NOT_FOUND, "PCF8574 write failed. PCF8574 not initialized.");
-#ifdef CONFIG_IDF_TARGET_ESP8266
-    i2c_cmd_handle_t i2c_cmd_handle = i2c_cmd_link_create();
-    i2c_master_start(i2c_cmd_handle);
-    i2c_master_write_byte(i2c_cmd_handle, handle->i2c_address << 1 | I2C_MASTER_WRITE, true);
-    i2c_master_write_byte(i2c_cmd_handle, reg, true);
-    i2c_master_stop(i2c_cmd_handle);
-    esp_err_t err = i2c_master_cmd_begin(handle->i2c_port, i2c_cmd_handle, 1000 / portTICK_PERIOD_MS);
-    i2c_cmd_link_delete(i2c_cmd_handle);
-#else
     esp_err_t err = i2c_master_transmit(handle->dev_handle, &reg, sizeof(reg), 1000 / portTICK_PERIOD_MS);
-#endif
-    ZH_PCF8574_CHECK(err == ESP_OK, err, "PCF8574 write failed. I2C driver error.");
+    ZH_ERROR_CHECK(err == ESP_OK, err, NULL, "I2C driver error.");
     handle->gpio_status = reg;
-    ZH_PCF8574_LOGI("PCF8574 write completed successfully.");
     return ESP_OK;
 }