Added assy photos

Main code refactoring.
Removed saving device ID to EEPROM.
Removed ATmega168 support.

README.md

@@ -1,16 +1,10 @@
-# RF touch switch
+# nRF24 touch pad
 
-Touch switch on ATmega168/328 + nRF24.
+Touch pad on ATmega328 + nRF24.
 
 ## Features
 
 1. Power consumption in sleep mode approximately 10 μA. Up to 2 years of operation on one CR2032 battery (estimated).
 2. When triggered transmits battery level charge.
 3. Automatic restart in case of a hang-up.
-4. Easy installation into any standard touch switch enclosure.
-
-## Note
-
-A gateway is required. For details see [RF Gateway](https://github.com/aZholtikov/RF-Gateway).
-
-Any feedback via [e-mail](mailto:github@zh.com.ru) would be appreciated. Or... [Buy me a coffee](https://paypal.me/aZholtikov).
+4. Easy installation into any standard touch pad enclosure.

platformio.ini

@@ -1,63 +1,3 @@
-[env:ATmega168]
-platform = atmelavr
-board = ATmega168
-board_build.mcu = atmega168
-board_build.f_cpu = 8000000L
-framework = arduino
-upload_protocol = usbasp
-build_flags = 
-	-D ID=$UNIX_TIME
-board_fuses.hfuse = 0xDE
-board_fuses.lfuse = 0xE2
-board_fuses.efuse = 0x07
-upload_flags = 
-	-Pusb
-	-e
-lib_deps = 
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/feilipu/Arduino_FreeRTOS_Library
-	https://github.com/nRF24/RF24
-
-[env:ATmega168P]
-platform = atmelavr
-board = ATmega168P
-board_build.mcu = atmega168p
-board_build.f_cpu = 8000000L
-framework = arduino
-upload_protocol = usbasp
-build_flags = 
-	-D ID=$UNIX_TIME
-board_fuses.hfuse = 0xDE
-board_fuses.lfuse = 0xE2
-board_fuses.efuse = 0x07
-upload_flags = 
-	-Pusb
-	-e
-lib_deps = 
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/feilipu/Arduino_FreeRTOS_Library
-	https://github.com/nRF24/RF24
-
-[env:ATmega168PB]
-platform = atmelavr
-board = ATmega168PB
-board_build.mcu = atmega168pb
-board_build.f_cpu = 8000000L
-framework = arduino
-upload_protocol = usbasp
-build_flags = 
-	-D ID=$UNIX_TIME
-board_fuses.hfuse = 0xDE
-board_fuses.lfuse = 0xE2
-board_fuses.efuse = 0x07
-upload_flags = 
-	-Pusb
-	-e
-lib_deps = 
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/feilipu/Arduino_FreeRTOS_Library
-	https://github.com/nRF24/RF24
-
 [env:ATmega328]
 platform = atmelavr
 board = ATmega328
@@ -65,8 +5,6 @@ board_build.mcu = atmega328
 board_build.f_cpu = 8000000L
 framework = arduino
 upload_protocol = usbasp
-build_flags = 
-	-D ID=$UNIX_TIME
 board_fuses.hfuse = 0xDE
 board_fuses.lfuse = 0xE2
 board_fuses.efuse = 0x07
@@ -74,9 +12,9 @@ upload_flags =
 	-Pusb
 	-e
 lib_deps = 
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/feilipu/Arduino_FreeRTOS_Library
-	https://github.com/nRF24/RF24
+	http://git.zh.com.ru/alexey.zholtikov/zh_config.git
+	http://git.zh.com.ru/alexey.zholtikov/arduino_nrf24.git
+	http://git.zh.com.ru/alexey.zholtikov/arduino_free_rtos.git
 
 [env:ATmega328P]
 platform = atmelavr
@@ -85,8 +23,6 @@ board_build.mcu = atmega328p
 board_build.f_cpu = 8000000L
 framework = arduino
 upload_protocol = usbasp
-build_flags = 
-	-D ID=$UNIX_TIME
 board_fuses.hfuse = 0xDE
 board_fuses.lfuse = 0xE2
 board_fuses.efuse = 0x07
@@ -94,9 +30,9 @@ upload_flags =
 	-Pusb
 	-e
 lib_deps = 
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/feilipu/Arduino_FreeRTOS_Library
-	https://github.com/nRF24/RF24
+	http://git.zh.com.ru/alexey.zholtikov/zh_config.git
+	http://git.zh.com.ru/alexey.zholtikov/arduino_nrf24.git
+	http://git.zh.com.ru/alexey.zholtikov/arduino_free_rtos.git
 
 [env:ATmega328PB]
 platform = atmelavr
@@ -105,8 +41,6 @@ board_build.mcu = atmega328pb
 board_build.f_cpu = 8000000L
 framework = arduino
 upload_protocol = usbasp
-build_flags = 
-	-D ID=$UNIX_TIME
 board_fuses.hfuse = 0xDE
 board_fuses.lfuse = 0xE2
 board_fuses.efuse = 0x07
@@ -114,6 +48,6 @@ upload_flags =
 	-Pusb
 	-e
 lib_deps = 
-	https://github.com/aZholtikov/ZHConfig
-	https://github.com/feilipu/Arduino_FreeRTOS_Library
-	https://github.com/nRF24/RF24
+	http://git.zh.com.ru/alexey.zholtikov/zh_config.git
+	http://git.zh.com.ru/alexey.zholtikov/arduino_nrf24.git
+	http://git.zh.com.ru/alexey.zholtikov/arduino_free_rtos.git

src/main.cpp

@@ -3,22 +3,44 @@
 #include "RF24.h"
 #include "avr/interrupt.h"
 #include "semphr.h"
-#include "EEPROM.h"
-#include "ZHConfig.h"
+#include "zh_config.h"
 
-void sendButtonPushing(void *pvParameters);
-float getBatteryLevelCharge(void);
-void loadId(void);
-
-int16_t id{abs((int16_t)ID)};
+#define ID 1 // Unique ID of the device on the network.
 
 RF24 radio(9, 10);
-SemaphoreHandle_t buttonSemaphore;
+SemaphoreHandle_t pad_pushing;
+
+float get_battery_level_charge()
+{
+  ADMUX = (1 << REFS0) | (1 << MUX3) | (1 << MUX2) | (1 << MUX1);
+  ADCSRA |= (1 << ADEN);
+  delay(10);
+  ADCSRA |= (1 << ADSC);
+  while (bit_is_set(ADCSRA, ADSC))
+    ;
+  ADCSRA &= ~(1 << ADEN);
+  return (1024 * 1.1) / (ADCL + ADCH * 256);
+}
+
+void send_pad_pushing(void *pvParameters)
+{
+  (void)pvParameters;
+  for (;;)
+  {
+    xSemaphoreTake(pad_pushing, portMAX_DELAY);
+    rf_transmitted_data_t sensor{ID, RFST_TOUCH_PAD};
+    sensor.value_1 = get_battery_level_charge() * 100;
+    radio.powerUp();
+    radio.flush_tx();
+    radio.write(&sensor, sizeof(rf_transmitted_data_t));
+    radio.powerDown();
+    sei();
+  }
+  vTaskDelete(NULL);
+}
 
 void setup()
 {
-  loadId();
-
   EICRA |= (1 << ISC11) | (1 << ISC10);
   EIMSK |= (1 << INT1);
   ADCSRA &= ~(1 << ADEN);
@@ -32,8 +54,8 @@ void setup()
   radio.setRetries(15, 15);
   radio.openWritingPipe(0xDDEEFF);
   radio.powerDown();
-  buttonSemaphore = xSemaphoreCreateBinary();
-  xTaskCreate(sendButtonPushing, "Send Button Pushing", configMINIMAL_STACK_SIZE, NULL, 1, NULL);
+  pad_pushing = xSemaphoreCreateBinary();
+  xTaskCreate(send_pad_pushing, "Send Pad Pushing", configMINIMAL_STACK_SIZE, NULL, 1, NULL);
 }
 
 void loop()
@@ -46,51 +68,8 @@ void loop()
   sleep_reset();
 }
 
-void sendButtonPushing(void *pvParameters)
-{
-  (void)pvParameters;
-  for (;;)
-  {
-    xSemaphoreTake(buttonSemaphore, portMAX_DELAY);
-    rf_transmitted_data_t sensor{id, RFST_TOUCH_SWITCH};
-    sensor.value_1 = getBatteryLevelCharge() * 100;
-    radio.powerUp();
-    radio.flush_tx();
-    radio.write(&sensor, sizeof(rf_transmitted_data_t));
-    radio.powerDown();
-    sei();
-  }
-  vTaskDelete(NULL);
-}
-
-float getBatteryLevelCharge()
-{
-  ADMUX = (1 << REFS0) | (1 << MUX3) | (1 << MUX2) | (1 << MUX1);
-  ADCSRA |= (1 << ADEN);
-  delay(10);
-  ADCSRA |= (1 << ADSC);
-  while (bit_is_set(ADCSRA, ADSC))
-    ;
-  ADCSRA &= ~(1 << ADEN);
-  return (1024 * 1.1) / (ADCL + ADCH * 256);
-}
-
-void loadId()
-{
-  cli();
-  if (EEPROM.read(511) == 254)
-    EEPROM.get(0, id);
-  else
-  {
-    EEPROM.write(511, 254);
-    EEPROM.put(0, id);
-  }
-  delay(50);
-  sei();
-}
-
 ISR(INT1_vect)
 {
   cli();
-  xSemaphoreGiveFromISR(buttonSemaphore, NULL);
+  xSemaphoreGiveFromISR(pad_pushing, NULL);
 }