mirror of
https://github.com/google/mozc-devices.git
synced 2025-11-08 16:53:28 +03:00
141 lines
3.3 KiB
Markdown
141 lines
3.3 KiB
Markdown
# Gboard Yunomi version
|
|
|
|
This contains programs, schematics and board layouts for Gboard Yunomi version,
|
|
which was released on **Oct 1, 2021**.
|
|
|
|
This is not an officially supported Google product.
|
|
|
|
## Contents
|
|
|
|
The directory structure is as follows:
|
|
|
|
- firmware/ : Arduino sketch.
|
|
- board/ : KiCad schematics and PCB layouts.
|
|
- jig.stl : A jig for building the keyboards.
|
|
- ../third_party/mozc-yunomi/keyswitches.pretty : Footprint data for the key
|
|
switches.
|
|
|
|
## Building Gboard Yunomi Version
|
|
|
|
|
|
|
|
**We also have the Pro Micro version of the device, which is easier to build. Please refer to [the Pro Micro README](./README_promicro.md) if you want to build one with Pro Micro.**
|
|
|
|
### Parts
|
|
|
|
- Kailh choc key x60
|
|
- Diode (1N4148) x60
|
|
- ATMega32U4-AU (QFP)
|
|
- Resistor 10kOhm
|
|
- Resistor 22Ohm x2
|
|
- Capacitor 0.1uF
|
|
- Capacitor 1uF x2
|
|
- Capacitor 22pF x2
|
|
- Crystal 16MHz (HC-49)
|
|
- USB-C connector breakout (4pin)
|
|
|
|
### PCBs
|
|
|
|
We need two types of PCBs to build this project.
|
|
|
|
|
|
|
|
#### Key-PCB
|
|
|
|
|
|
|
|
File location: board/key
|
|
|
|
Shape: Rectangular.
|
|
|
|
Components: Diodes and key switches.
|
|
|
|
Number of PCBs required: 12
|
|
|
|
#### Base-PCB:
|
|
|
|
|
|
|
|
File location: board/base
|
|
|
|
Shape: Dodecagonal
|
|
|
|
Component2: ATMega32u4.
|
|
|
|
### Steps to build
|
|
|
|
#### Step 1
|
|
|
|
Solder diodes D1 to D5 onto the twelve Key-PCBs at the silk-screened locations.
|
|
|
|
*IMPORTANT:* Diodes on six of the Key-PCB should be placed in the opposite
|
|
direction.
|
|
|
|
For six of the PCBs, we can solder diodes as indicated by the silk-screen. For
|
|
the other six PCBs, we need to solder the diodes in the opposite direction.
|
|
|
|
#### Step 2
|
|
|
|
Solder key-switches to each Key-PCB. Note that the diodes need to be placed on
|
|
the opposite side of the Key-PCB to the key-switches, as shown by the
|
|
silk-screen.
|
|
|
|
#### Step 3
|
|
|
|
Create a cylindrical shape by combining the 12 Key-PCBs.
|
|
|
|
There are six connection points between each pair of Key-PCBs. Connect adjacent
|
|
pairs of boards by soldering the tin-plated wires (see the picture).
|
|
|
|
However, only connect J11 and J12 between the first and last Key-PCB, instead of
|
|
all six locations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you have a 3D printer, you may print and use jig.stl to help with this step.
|
|
|
|
#### Step 4
|
|
|
|
Solder all parts for Base-PCB.
|
|
|
|
#### Step 5
|
|
|
|
Connect Base-PCB to the cylinder made in Step 3.
|
|
|
|
|
|
|
|
#### Step 6
|
|
|
|
Install the
|
|
[Arduino caterina bootloader](https://github.com/arduino/ArduinoCore-avr/blob/master/bootloaders/caterina/Caterina-Leonardo.hex)
|
|
using AVRISP or other ISP tool.
|
|
|
|
#### Step 7
|
|
|
|
Install firmware using the Arduino IDE.
|
|
|
|
#### Step 8
|
|
|
|
Connect the keyboard to a PC or other device that has Google Japanese
|
|
Input/Gboard installed.
|
|
|
|
## License
|
|
|
|
```
|
|
Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
not use this file except in compliance with the License. You may obtain
|
|
a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
```
|