bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
#!/usr/bin/python
|
|
|
|
# Author: Jon Trulson <jtrulson@ics.com>
|
2017-03-24 17:04:48 -06:00
|
|
|
# Copyright (c) 2016-2017 Intel Corporation.
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
#
|
|
|
|
# Permission is hereby granted, free of charge, to any person obtaining
|
|
|
|
# a copy of this software and associated documentation files (the
|
|
|
|
# "Software"), to deal in the Software without restriction, including
|
|
|
|
# without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
# distribute, sublicense, and/or sell copies of the Software, and to
|
|
|
|
# permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
# the following conditions:
|
|
|
|
#
|
|
|
|
# The above copyright notice and this permission notice shall be
|
|
|
|
# included in all copies or substantial portions of the Software.
|
|
|
|
#
|
|
|
|
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
|
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
|
|
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
|
# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
|
|
|
|
# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
|
|
|
|
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
|
|
|
|
# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
|
2016-10-10 14:48:42 -07:00
|
|
|
from __future__ import print_function
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
import time, sys, signal, atexit
|
2017-03-24 17:04:48 -06:00
|
|
|
from upm import pyupm_bma250e as sensorObj
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-09-29 18:24:19 -07:00
|
|
|
def main():
|
|
|
|
# Instantiate a BMP250E instance using default i2c bus and address
|
|
|
|
sensor = sensorObj.BMA250E()
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-09-29 18:24:19 -07:00
|
|
|
# For SPI, bus 0, you would pass -1 as the address, and a valid pin for CS:
|
|
|
|
# BMA250E(0, -1, 10);
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-09-29 18:24:19 -07:00
|
|
|
## Exit handlers ##
|
|
|
|
# This function stops python from printing a stacktrace when you hit control-C
|
|
|
|
def SIGINTHandler(signum, frame):
|
|
|
|
raise SystemExit
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-09-29 18:24:19 -07:00
|
|
|
# This function lets you run code on exit
|
|
|
|
def exitHandler():
|
2016-10-10 14:48:42 -07:00
|
|
|
print("Exiting")
|
2016-09-29 18:24:19 -07:00
|
|
|
sys.exit(0)
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-09-29 18:24:19 -07:00
|
|
|
# Register exit handlers
|
|
|
|
atexit.register(exitHandler)
|
|
|
|
signal.signal(signal.SIGINT, SIGINTHandler)
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-09-29 18:24:19 -07:00
|
|
|
# now output data every 250 milliseconds
|
|
|
|
while (1):
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
sensor.update()
|
|
|
|
|
2017-03-24 17:04:48 -06:00
|
|
|
data = sensor.getAccelerometer()
|
|
|
|
print("Accelerometer x:", data[0], end=' ')
|
|
|
|
print(" y:", data[1], end=' ')
|
|
|
|
print(" z:", data[2], end=' ')
|
2016-10-10 14:48:42 -07:00
|
|
|
print(" g")
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
|
|
|
# we show both C and F for temperature
|
2016-10-10 14:48:42 -07:00
|
|
|
print("Compensation Temperature:", sensor.getTemperature(), "C /", end=' ')
|
|
|
|
print(sensor.getTemperature(True), "F")
|
bmx055, bmi055, bmc160, bma250e, bmg150, bmm150: Initial implementation
This module (bmx055) implements support for the following core Bosch
chipsets:
bma250e - accelerometer, 3 variants (chip id's 0x03, 0xf9, and 0xfa)
bmm150 - magnetometer
bmg160 - gyroscope
The other 3 devices are combinations of the above:
bmx055 - accel/gyro/mag
bmc160 - accel/mag
bmi055 - accel/gyro
...for 6 devices total.
For the combination devices, all of the sub-devices appear as
individual independent devices on the I2C/SPI bus.
The combination drivers provide basic configuration and data output.
For more detailed control as well as interrupt support, you should use
the core device drivers (accel/gyro/mag) directly.
These devices support both I2C and SPI communications. They must be
powered at 3.3vdc.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
2016-05-06 17:56:51 -06:00
|
|
|
|
2016-10-10 14:48:42 -07:00
|
|
|
print()
|
2016-09-29 18:24:19 -07:00
|
|
|
time.sleep(.250)
|
|
|
|
|
|
|
|
if __name__ == '__main__':
|
|
|
|
main()
|