bmpx8x: rename gy65 to bmpx8x to more properly reflect supported chips

Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>

src/bmpx8x/CMakeLists.txt

@@ -0,0 +1,5 @@
+set (libname "bmpx8x")
+set (libdescription "upm BMPX8X")
+set (module_src ${libname}.cxx)
+set (module_h ${libname}.h)
+upm_module_init()

src/bmpx8x/bmpx8x.cxx

@@ -0,0 +1,222 @@
+/*
+ * Author: Yevgeniy Kiveisha <yevgeniy.kiveisha@intel.com>
+ * Copyright (c) 2014 Intel Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <iostream>
+#include <unistd.h>
+#include <stdlib.h>
+
+#include "bmpx8x.h"
+
+using namespace upm;
+
+BMPX8X::BMPX8X (int bus, int devAddr, uint8_t mode) {
+    m_name = "BMPX8X";
+
+    m_controlAddr = devAddr;
+    m_bus = bus;
+
+    m_i2ControlCtx = mraa_i2c_init(m_bus);
+
+    mraa_result_t ret = mraa_i2c_address(m_i2ControlCtx, m_controlAddr);
+    if (ret != MRAA_SUCCESS) {
+        fprintf(stderr, "Messed up i2c bus\n");
+    }
+
+    if (i2cReadReg_8 (0xD0) != 0x55)  {
+        std::cout << "Error :: Cannot continue" << std::endl;
+        return;
+    }
+
+    if (mode > BMP085_ULTRAHIGHRES) {
+        mode = BMP085_ULTRAHIGHRES;
+    }
+    oversampling = mode;
+
+    /* read calibration data */
+    ac1 = i2cReadReg_16 (BMP085_CAL_AC1);
+    ac2 = i2cReadReg_16 (BMP085_CAL_AC2);
+    ac3 = i2cReadReg_16 (BMP085_CAL_AC3);
+    ac4 = i2cReadReg_16 (BMP085_CAL_AC4);
+    ac5 = i2cReadReg_16 (BMP085_CAL_AC5);
+    ac6 = i2cReadReg_16 (BMP085_CAL_AC6);
+
+    b1 = i2cReadReg_16 (BMP085_CAL_B1);
+    b2 = i2cReadReg_16 (BMP085_CAL_B2);
+
+    mb = i2cReadReg_16 (BMP085_CAL_MB);
+    mc = i2cReadReg_16 (BMP085_CAL_MC);
+    md = i2cReadReg_16 (BMP085_CAL_MD);
+}
+
+BMPX8X::~BMPX8X() {
+    mraa_i2c_stop(m_i2ControlCtx);
+}
+
+int32_t
+BMPX8X::getPressure () {
+    int32_t UT, UP, B3, B5, B6, X1, X2, X3, p;
+    uint32_t B4, B7;
+
+    UT = getTemperatureRaw();
+    UP = getPressureRaw();
+    B5 = computeB5(UT);
+
+    // do pressure calcs
+    B6 = B5 - 4000;
+    X1 = ((int32_t)b2 * ( (B6 * B6)>>12 )) >> 11;
+    X2 = ((int32_t)ac2 * B6) >> 11;
+    X3 = X1 + X2;
+    B3 = ((((int32_t)ac1*4 + X3) << oversampling) + 2) / 4;
+
+    X1 = ((int32_t)ac3 * B6) >> 13;
+    X2 = ((int32_t)b1 * ((B6 * B6) >> 12)) >> 16;
+    X3 = ((X1 + X2) + 2) >> 2;
+    B4 = ((uint32_t)ac4 * (uint32_t)(X3 + 32768)) >> 15;
+    B7 = ((uint32_t)UP - B3) * (uint32_t)( 50000UL >> oversampling );
+
+    if (B7 < 0x80000000) {
+        p = (B7 * 2) / B4;
+    } else {
+        p = (B7 / B4) * 2;
+    }
+    X1 = (p >> 8) * (p >> 8);
+    X1 = (X1 * 3038) >> 16;
+    X2 = (-7357 * p) >> 16;
+
+    p = p + ((X1 + X2 + (int32_t)3791)>>4);
+
+    return p;
+}
+
+int32_t
+BMPX8X::getPressureRaw () {
+    uint32_t raw;
+
+    i2cWriteReg (BMP085_CONTROL, BMP085_READPRESSURECMD + (oversampling << 6));
+
+    if (oversampling == BMP085_ULTRALOWPOWER) {
+        usleep(5000);
+    } else if (oversampling == BMP085_STANDARD) {
+        usleep(8000);
+    } else if (oversampling == BMP085_HIGHRES) {
+        usleep(14000);
+    } else {
+        usleep(26000);
+    }
+
+    raw = i2cReadReg_16 (BMP085_PRESSUREDATA);
+
+    raw <<= 8;
+    raw |= i2cReadReg_8 (BMP085_PRESSUREDATA + 2);
+    raw >>= (8 - oversampling);
+
+    return raw;
+}
+
+int16_t
+BMPX8X::getTemperatureRaw () {
+    i2cWriteReg (BMP085_CONTROL, BMP085_READTEMPCMD);
+    usleep(5000);
+    return i2cReadReg_16 (BMP085_TEMPDATA);
+}
+
+float
+BMPX8X::getTemperature () {
+    int32_t UT, B5;     // following ds convention
+    float temp;
+
+    UT = getTemperatureRaw ();
+
+    B5 = computeB5 (UT);
+    temp = (B5 + 8) >> 4;
+    temp /= 10;
+
+    return temp;
+}
+
+int32_t
+BMPX8X::getSealevelPressure(float altitudeMeters) {
+    float pressure = getPressure ();
+    return (int32_t)(pressure / pow(1.0-altitudeMeters/44330, 5.255));
+}
+
+float
+BMPX8X::getAltitude (float sealevelPressure) {
+    float altitude;
+
+    float pressure = getPressure ();
+
+    altitude = 44330 * (1.0 - pow(pressure /sealevelPressure,0.1903));
+
+    return altitude;
+}
+
+int32_t
+BMPX8X::computeB5(int32_t UT) {
+    int32_t X1 = (UT - (int32_t)ac6) * ((int32_t)ac5) >> 15;
+    int32_t X2 = ((int32_t)mc << 11) / (X1+(int32_t)md);
+
+    return X1 + X2;
+}
+
+mraa_result_t
+BMPX8X::i2cWriteReg (uint8_t reg, uint8_t value) {
+    mraa_result_t error = MRAA_SUCCESS;
+
+    uint8_t data[2] = { reg, value };
+    error = mraa_i2c_address (m_i2ControlCtx, m_controlAddr);
+    error = mraa_i2c_write (m_i2ControlCtx, data, 2);
+
+    return error;
+}
+
+uint16_t
+BMPX8X::i2cReadReg_16 (int reg) {
+    uint16_t data;
+
+    mraa_i2c_address(m_i2ControlCtx, m_controlAddr);
+    mraa_i2c_write_byte(m_i2ControlCtx, reg);
+
+    mraa_i2c_address(m_i2ControlCtx, m_controlAddr);
+    mraa_i2c_read(m_i2ControlCtx, (uint8_t *)&data, 0x2);
+
+    uint8_t high = (data & 0xFF00) >> 8;
+    data = (data << 8) & 0xFF00;
+    data |= high;
+
+    return data;
+}
+
+uint8_t
+BMPX8X::i2cReadReg_8 (int reg) {
+    uint8_t data;
+
+    mraa_i2c_address(m_i2ControlCtx, m_controlAddr);
+    mraa_i2c_write_byte(m_i2ControlCtx, reg);
+
+    mraa_i2c_address(m_i2ControlCtx, m_controlAddr);
+    mraa_i2c_read(m_i2ControlCtx, &data, 0x1);
+
+    return data;
+}

src/bmpx8x/bmpx8x.h

@@ -0,0 +1,170 @@
+/*
+ * Author: Yevgeniy Kiveisha <yevgeniy.kiveisha@intel.com>
+ * Contributions: Jon Trulson <jtrulson@ics.com>
+ * Copyright (c) 2014 Intel Corporation.
+ *
+ * Credits to Adafruit.
+ * Based on Adafruit BMP085 library.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+#pragma once
+
+#include <string>
+#include <mraa/i2c.h>
+#include <math.h>
+
+#define ADDR               0x77 // device address
+
+// registers address
+#define BMP085_ULTRALOWPOWER 0
+#define BMP085_STANDARD      1
+#define BMP085_HIGHRES       2
+#define BMP085_ULTRAHIGHRES  3
+#define BMP085_CAL_AC1           0xAA  // R   Calibration data (16 bits)
+#define BMP085_CAL_AC2           0xAC  // R   Calibration data (16 bits)
+#define BMP085_CAL_AC3           0xAE  // R   Calibration data (16 bits)
+#define BMP085_CAL_AC4           0xB0  // R   Calibration data (16 bits)
+#define BMP085_CAL_AC5           0xB2  // R   Calibration data (16 bits)
+#define BMP085_CAL_AC6           0xB4  // R   Calibration data (16 bits)
+#define BMP085_CAL_B1            0xB6  // R   Calibration data (16 bits)
+#define BMP085_CAL_B2            0xB8  // R   Calibration data (16 bits)
+#define BMP085_CAL_MB            0xBA  // R   Calibration data (16 bits)
+#define BMP085_CAL_MC            0xBC  // R   Calibration data (16 bits)
+#define BMP085_CAL_MD            0xBE  // R   Calibration data (16 bits)
+
+#define BMP085_CONTROL           0xF4
+#define BMP085_TEMPDATA          0xF6
+#define BMP085_PRESSUREDATA      0xF6
+#define BMP085_READTEMPCMD       0x2E
+#define BMP085_READPRESSURECMD   0x34
+
+#define HIGH               1
+#define LOW                0
+
+namespace upm {
+
+/**
+ * @brief C++ API for GY65/BMP085 and BMP180 chips (Atmospheric Pressure Sensor)
+ *
+ * The Bosch GY65/BMP085 and BMP180 are high precision, ultra-low
+ * power consumption pressure sensors. They have a range of between
+ * 30,000 and 110,000 Pa.
+ *
+ * This module has been tested on the GY65/BMP085 and BMP180 sensors.
+ *
+ * @ingroup bmpx8x i2c
+ * @defgroup bmpx8x libupm-bmpx8x
+ * @snippet bmpx8x.cxx Interesting
+ * @image html bmp085.jpeg
+ */
+class BMPX8X {
+    public:
+        /**
+         * Instanciates a BMPX8X object
+         *
+         * @param bus number of used bus
+         * @param devAddr address of used i2c device
+         * @param mode BMP085 mode
+         */
+        BMPX8X (int bus, int devAddr=0x77, uint8_t mode=BMP085_ULTRAHIGHRES);
+
+        /**
+         * BMPX8X object destructor, basicaly it close i2c connection.
+         */
+        ~BMPX8X ();
+
+        /**
+         * Return calculated pressure
+         */
+        int32_t getPressure ();
+
+        /**
+         *
+         * Get raw pressure data
+         */
+        int32_t getPressureRaw ();
+
+        /**
+         * Get raw temperature data from chip
+         */
+        int16_t getTemperatureRaw ();
+
+        /**
+         * Return calculated temperature
+         */
+        float getTemperature ();
+
+        /**
+         * With given absolute altitude sea level can be calculated
+         *
+         * @param altitudeMeters altitude
+         */
+        int32_t getSealevelPressure(float altitudeMeters = 0);
+
+        /**
+         * With given sea level altitude in meters can be calculated
+         *
+         * @param sealevelPressure Sea level
+         */
+        float getAltitude (float sealevelPressure = 101325);
+
+        /**
+         * Calculation of B5 (check spec for more information)
+         *
+         * @param UT
+         */
+        int32_t computeB5 (int32_t UT);
+
+        /**
+         * Read two bytes register
+         *
+         * @param reg address of a register
+         */
+        uint16_t i2cReadReg_16 (int reg);
+
+        /**
+         * Write to one byte register
+         *
+         * @param reg address of a register
+         * @param value byte to be written
+         */
+        mraa_result_t i2cWriteReg (uint8_t reg, uint8_t value);
+
+        /**
+         * Read one byte register
+         *
+         * @param reg address of a register
+         */
+        uint8_t i2cReadReg_8 (int reg);
+
+    private:
+        std::string m_name;
+
+        int m_controlAddr;
+        int m_bus;
+        mraa_i2c_context m_i2ControlCtx;
+
+        uint8_t oversampling;
+        int16_t ac1, ac2, ac3, b1, b2, mb, mc, md;
+        uint16_t ac4, ac5, ac6;
+};
+
+}

src/bmpx8x/jsupm_bmpx8x.i

@@ -0,0 +1,8 @@
+%module jsupm_bmpx8x
+%include "../upm.i"
+
+%{
+    #include "bmpx8x.h"
+%}
+
+%include "bmpx8x.h"

src/bmpx8x/pyupm_bmpx8x.i

@@ -0,0 +1,10 @@
+%module pyupm_bmpx8x
+%include "../upm.i"
+
+%include "stdint.i"
+
+%include "bmpx8x.h"
+%{
+    #include "bmpx8x.h"
+%}
+