The purpose of the templatesensor is to get contributors up and running
faster when adding a new sensor.
* Created library named 'sensortemplate'
* Added C++ source
* Added swig interface files for java, javascript, and python
* Added sensortemplate image file
* Added examples for c++, java, javascript, and python
* Updated contributions.md with steps to create a new sensor from
the sensortemplate library.
Signed-off-by: Noel Eck <noel.eck@intel.com>
This commit translates C++ interfaces to Java interfaces, previously C++ Interfaces implemented java classes.
* Added java swig interface files for all C++ interfaces to simplify swig
javaupm_iADC.i
javaupm_iCO2Sensor.i
javaupm_iHumiditySensor.i
javaupm_iLightController.i
javaupm_iLightSensor.i
javaupm_iModuleStatus.i
javaupm_interfaces.i
javaupm_iPressureSensor.i
javaupm_iTemperatureSensor.i
<example Usage>
%include"../interfaces/javaupm_iADC.i"
* Modified swig interface files for few sensors that implements interfaces
ads1x15
bmp280
bmpx8x
ds1808lc
hlg150h
lp8860
max44009
ms5611
si1132
si7005
t6713
* Removed few methods that were mentioned Protected and made them public, so that menthods can be overridden
* Made IModuleStatus virtual to avoid ambiguity in multiple inheritance
For example
class A {};
class B : public A {};
class C : public A {};
class D : public B, public C {};
This can be solved as
class A {};
class B : virtual public A {};
class C : virtual public A {};
class D : public B, public C {};
* Modified java interface files to support multiple swig versions
* Modified javaupm interface file to support standard auto load library code
* Fixed autoloadlibrary tests for interfaces
* Created one interface example separately <BME280_InterfaceExample.java>,
<example Usage>
BME280_InterfaceExample.java
since we cann't define swig versions inside java example file.
So, instaed added swig versions in Cmake.
<example Usage>
if (SWIG_VERSION VERSION_GREATER 3.0.8)
add_example_with_path(BME280_InterfaceExample bmp280 bmp280)
endif()
Signed-off-by: sisinty sasmita patra <sisinty.s.patra@intel.com>
These changes add the ability to intialize a speaker instance to use a
PWM pin instead of a standard GPIO pin in order to emit sounds.
The current GPIO functionality is fairly constrained by the
implementation -- it only permits playing cerain hardcoded "notes".
The PWM support allows one to emit specific frequencies (currently
between 50-32Khz) using a PWM pin. Of course, you may still be
constrained by the limits of your PWM hardware in the end.
There are a few new functions provided to support this PWM mode. To
use the PWM mode of speaker, use the speaker_init_pwm() initialization
routine instead of speaker_init() (for C). For C++ and the SWIG
languages, pass "true" as the second argument to the constructor to
enable PWM mode. The default is "false", to match current default
behavior (GPIO).
Functions that are not related to a given mode (GPIO vs. PWM) will do
nothing if not usable in that mode.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
uartat is the underlying UART driver, specifically for use with
AT-style command driven devices like modems.
The le910 support is provided in the form of examples that make use
of the uartat driver to interact with the device.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
This driver was developed with a DFRobot SHT10 Temperature and Humidity
sensor. This driver should work on all SHT1X devices.
It requires a 10K pull-up resistor connected to the data pin.
The sensor can be run at differing voltages from 2.5v to 5v.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
* Renamed all files from grovewater to water
* Replaced all instances of grovewater with water
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
* Renamed all files from groverrotary to rotary
* Replaced all instances of groverrotary with rotary
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
This module implements support for the DFRobot EC (Electrical
Conductivity) meter. It relies on the use of the DS18B20 UPM C module
for temperature gathering.
It has a pretty complicated calibration procedure which is somewhat
documented on the DFRobot wiki. Functions have been added to support
changing the various coefficients as desired.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
This module was initially known as GroveCollision. It has been
now changed to Collision. C source and examples added.
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
* Changed module from upm_grove to upm_relay/rotary.
* Updated java examples cmake from upm_grove to upm_relay/rotary.
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added C source for rotary angle sensor
* Renamed all files from groverrotary to rotary
* Replaced all instances of groverrotary with rotary
* Added C source for rotary angle sensor
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
Since these were split out from the grove lib, they need to load their
own library, ie Light now comes from upm_light.so.
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the flex sensor with necessary changes to cmake,
examples, and docs.
* Renamed all files with groveslide to slide
* Replaced all instances of groveslide with slide
* Added C source for slide sensor
* Updated all cmake files
* Added C example for slide sensor
* Split out slide sensor from grove library
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the light sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with grovelight to light
* Replaced all instances of grovelight with light
* Added C source for light sensor
* Updated all cmake files
* Added C example for light sensor
* Split out light sensor from grove library
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the gsr sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with grovegsr to gsr
* Replaced all instances of grovegsr with gsr
* Added C source for gsr sensor
* Updated all cmake files
* Added C example for gsr sensor
* Fixed C++ threshold method from throwing on a successfull aio read
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the emg sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with groveemg to emg
* Replaced all instances of groveemg with emg
* Added C source for emg sensor
* Updated all cmake files
* Added C example for emg sensor
Signed-off-by: Noel Eck <noel.eck@intel.com>
