upm/examples/c++/uartat-le910.cxx

/*
 * Author: Jon Trulson <jtrulson@ics.com>
 * Copyright (c) 2017 Intel Corporation.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

#include <iostream>
#include <string>

#include "uartat.hpp"
#include "upm_utilities.h"

using namespace std;

const size_t bufferLength = 256;

int main(int argc, char **argv)
{
//! [Interesting]

    string defaultDev = string("/dev/ttyUSB0");
    if (argc > 1)
        defaultDev = string(argv[1]);

    cout << "Using device: " << defaultDev << endl;

    // Instantiate a UARTAT sensor on defaultDev at 115200 baud.
    upm::UARTAT *sensor = new upm::UARTAT(defaultDev, 115200);

    // This is a simplistic example that tries to configure the LE910,
    // and use it's built-in socket capabilities to connect to a
    // remote host, obtain a small piece of data, and return it.  It's
    // mainly intended to show you how you can use the various AT
    // commands supported by the LE910 to perform simple tasks.
    //
    // You must have a valid SIM card with an active data plan for
    // this example to do anything interesting.
    //
    // See the LE910 AT Commands reference for full information on
    // what is possible with this device.  The uartat driver is
    // intended to make it a little easier to control AT-style
    // devices, but is by no means a full-featured communication
    // infrastructure.  A "real" application will probably need to be
    // much more sophisticated with regard to parsing, doing retries,
    // etc.
    //
    // For experimenting with various AT commands, try using an
    // interactive terminal emulator like minicom or screen.

    // make sure we are in command mode
    if (!sensor->inCommandMode())
    {
        cout << "Not in command mode, switching..." << endl;
        sensor->commandMode("+++", 1000);
    }

    // flter out CR's in responses by default
    sensor->filterCR(true);

    cout << "Configuring modem..." << endl;

    // discard any waiting characters
    sensor->drain();

    // reset modem
    sensor->command("ATZ\r");

    // turn off command echo, set verbosity to 1, enable data
    // connection mode
    sensor->command("ATE0 V1 +FCLASS=0\r");
    sensor->drain();

    // Now issue some commands and output the results.

    cout << "Modem and SIM information:" << endl;
    std::string buffer;
    buffer = sensor->commandWithResponse("AT+ICCID\r", bufferLength);
    if (!buffer.empty())
        cout << "ICCID (SIM ID): "
             << buffer
             << endl;

    buffer = sensor->commandWithResponse("AT+CGSN=1\r", bufferLength);
    if (!buffer.empty())
        cout << "IMEI: "
             << buffer
             << endl;

    // see if we are on the network....
    buffer = sensor->commandWithResponse("AT+CREG?\r", bufferLength);
    if (!buffer.empty())
    {
        cout << buffer << endl;

        // look for "CGREG: 0,1" or "CGREG: 0,5"
        if (sensor->find(buffer, "CREG: 0,1") ||
            sensor->find(buffer, "CREG: 0,5"))
        {
            cout << "Connected to the cell data network." << endl;

            // wait up to 5 seconds for responses now...
            sensor->setResponseWaitTime(5000);

            // setup PDP context (socket 1).  An ERROR repsonse is
            // possible if the PDP context is already set up.
            sensor->command("AT#SGACT=1,1\r");

            // setup a TCP socket to nist.gov and read the timestamp.

            cout << "Connecting to time-a.nist.gov, TCP port 13" << endl;

            // Wait up to 60 seconds to find the NO CARRIER
            // string, which will be present at the end, if the
            // connection succeeded and the requested data was
            // obtained.
            buffer =
                sensor->commandWaitFor("AT#SD=1,0,13,\"time-a.nist.gov\"\r",
                                       bufferLength, "\nNO CARRIER\n", 60000);
            if (!buffer.empty())
            {
                // print out the response
                cout << "RESPONSE: "
                     << endl
                     << buffer
                     << endl;
            }
            else
            {
                cout << "No response." << endl;
            }

            // destroy PDP context
            sensor->setResponseWaitTime(250);
            sensor->command("AT#SGACT=1,0\r");
        }
        else
        {
            cout << "You do not appear to be connected to the network..."
                 << endl;
        }
    }
    else
    {
        cout << "Error executing query\n" << endl;
    }

    // reset the modem
    sensor->command("ATZ\r");

    cout << "Exiting" << endl;

    delete sensor;

//! [Interesting]

    return 0;
}