77 lines
2.0 KiB
Markdown
Executable File
77 lines
2.0 KiB
Markdown
Executable File
# ESP32 ESP-IDF and ESP8266 RTOS SDK component for HTU20/HTU21 humidity & temperature sensor
|
|
|
|
## Tested on
|
|
|
|
1. ESP8266 RTOS_SDK v3.4
|
|
2. ESP32 ESP-IDF v5.2
|
|
|
|
## Using
|
|
|
|
In an existing project, run the following command to install the component:
|
|
|
|
```text
|
|
cd ../your_project/components
|
|
git clone https://github.com/aZholtikov/zh_htu.git
|
|
```
|
|
|
|
In the application, add the component:
|
|
|
|
```c
|
|
#include "zh_htu.h"
|
|
```
|
|
|
|
## Example
|
|
|
|
Reading the sensor:
|
|
|
|
```c
|
|
#include "zh_aht.h"
|
|
|
|
#define I2C_PORT (I2C_NUM_MAX - 1)
|
|
|
|
void app_main(void)
|
|
{
|
|
esp_log_level_set("zh_aht", ESP_LOG_NONE);
|
|
#ifdef CONFIG_IDF_TARGET_ESP8266
|
|
i2c_config_t i2c_config = {
|
|
.mode = I2C_MODE_MASTER,
|
|
.sda_io_num = GPIO_NUM_4, // In accordance with used chip.
|
|
.sda_pullup_en = GPIO_PULLUP_ENABLE,
|
|
.scl_io_num = GPIO_NUM_5, // In accordance with used chip.
|
|
.scl_pullup_en = GPIO_PULLUP_ENABLE,
|
|
};
|
|
i2c_driver_install(I2C_PORT, i2c_config.mode);
|
|
i2c_param_config(I2C_PORT, &i2c_config);
|
|
#else
|
|
i2c_master_bus_config_t i2c_bus_config = {
|
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
|
.i2c_port = I2C_PORT,
|
|
.scl_io_num = GPIO_NUM_22, // In accordance with used chip.
|
|
.sda_io_num = GPIO_NUM_21, // In accordance with used chip.
|
|
.glitch_ignore_cnt = 7,
|
|
.flags.enable_internal_pullup = true,
|
|
};
|
|
i2c_master_bus_handle_t i2c_bus_handle;
|
|
i2c_new_master_bus(&i2c_bus_config, &i2c_bus_handle);
|
|
#endif
|
|
zh_aht_init_config_t aht_init_config = ZH_AHT_INIT_CONFIG_DEFAULT();
|
|
#ifdef CONFIG_IDF_TARGET_ESP8266
|
|
aht_init_config.i2c_port = I2C_PORT;
|
|
#else
|
|
aht_init_config.i2c_handle = i2c_bus_handle;
|
|
#endif
|
|
zh_aht_init(&aht_init_config);
|
|
float humidity = 0.0;
|
|
float temperature = 0.0;
|
|
for (;;)
|
|
{
|
|
zh_aht_read(&humidity, &temperature);
|
|
printf("Humidity %0.2f\n", humidity);
|
|
printf("Temperature %0.2f\n", temperature);
|
|
vTaskDelay(5000 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|
|
```
|
|
|
|
Any [feedback](mailto:github@azholtikov.ru) will be gladly accepted.
|