Version 1.0.1

Update README.

README.md

@@ -5,8 +5,6 @@
 1. ESP8266 RTOS_SDK v3.4
 2. ESP32 ESP-IDF v5.2
 
-## [Function description](http://zh-onewire.zh.com.ru)
-
 ## Using
 
 In an existing project, run the following command to install the component:
@@ -31,6 +29,7 @@ Search 1-Wire devices on bus:
 
 void app_main(void)
 {
+    esp_log_level_set("zh_onewire", ESP_LOG_NONE);
     uint8_t *rom = NULL;
     zh_onewire_init(GPIO_NUM_5);
     if (zh_onewire_reset() != ESP_OK)

include/zh_onewire.h

@@ -1,9 +1,3 @@
-/**
- * @file
- * Header file for the zh_onewire component.
- *
- */
-
 #pragma once
 
 #include "stdio.h"

version.txt

@@ -1 +1 @@
-1.0.0
+1.0.1

zh_onewire.c

@@ -1,12 +1,5 @@
-/**
- * @file
- * The main code of the zh_onewire component.
- *
- */
-
 #include "zh_onewire.h"
 
-/// \cond
 #define MASTER_RESET_PULSE_DURATION 480 // Reset time high. Reset time low.
 #define RESPONSE_MAX_DURATION 60        // Presence detect high.
 #define PRESENCE_PULSE_MAX_DURATION 240 // Presence detect low.
@@ -15,24 +8,21 @@
 #define TIME_SLOT_DURATION 120          // Time slot.
 #define VALID_DATA_DURATION 15          // Valid data duration.
 
-#define SKIP_ROM 0xCC
-#define MATCH_ROM 0x55
-#define READ_ROM 0x33
-#define SEARCH_ROM 0xF0
+#define SKIP_ROM 0xCC   // Skip ROM command to address all 1-Wire devices.
+#define MATCH_ROM 0x55  // Match ROM command to address a specific 1-Wire device.
+#define READ_ROM 0x33   // Read ROM command for read ROM on only one 1-Wire device.
+#define SEARCH_ROM 0xF0 // Read ROM on all 1-Wire devices.
 
 #define pgm_read_byte(addr) (*(const uint8_t *)(addr))
-/// \endcond
 
 static uint8_t _read_bit(void);
 static void _send_bit(const uint8_t bit);
 
-/// \cond
 #ifdef CONFIG_IDF_TARGET_ESP8266
 #define esp_delay_us(x) os_delay_us(x)
 #else
 #define esp_delay_us(x) esp_rom_delay_us(x)
 #endif
-/// \endcond
 
 static const char *TAG = "zh_onewire";