feat: added all gpio support

.gitignore

@@ -0,0 +1 @@
+.DS_Store

README.md

@@ -9,7 +9,7 @@
 ## Note
 
 1. Enable interrupt support only if input GPIO's are used.
-2. All the INT GPIO's on the extenders must be connected to the one GPIO on AVR. Only PORTD4 - PORTD7 are acceptable!
+2. All the INT GPIO's on the extenders must be connected to the one GPIO on AVR.
 3. The input GPIO's are always pullup to the power supply.
 
 ## Dependencies
@@ -78,8 +78,9 @@ void pcf8574_example_task(void *pvParameters)
     zh_avr_i2c_master_init(false);
     zh_avr_pcf8574_init_config_t pcf8574_init_config = ZH_AVR_PCF8574_INIT_CONFIG_DEFAULT();
     pcf8574_init_config.i2c_address = 0x38;
-    pcf8574_init_config.p0_gpio_work_mode = true; // Required only for input GPIO.
-    pcf8574_init_config.interrupt_gpio = PORTD4;  // Required only if used input GPIO interrupts.
+    pcf8574_init_config.p0_gpio_work_mode = true;   // Required only for input GPIO.
+    pcf8574_init_config.interrupt_port = AVR_PORTD; // Required only if used input GPIO interrupts.
+    pcf8574_init_config.interrupt_gpio = PORTD4;    // Required only if used input GPIO interrupts.
     zh_avr_pcf8574_init(&pcf8574_init_config, &pcf8574_handle);
     uint8_t reg = 0;
     zh_avr_pcf8574_read(&pcf8574_handle, &reg);
@@ -124,8 +125,13 @@ void zh_avr_pcf8574_event_handler(zh_avr_pcf8574_event_on_isr_t *event) // Do no
     printf("Interrupt Task Remaining Stack Size %d.\n", uxTaskGetStackHighWaterMark(NULL));
 }
 
-ISR(PCINT2_vect) // Required only if used input GPIO interrupts.
+// ISR(PCINT0_vect) // For AVR_PORTB. Required only if used input GPIO interrupts.
+// ISR(PCINT1_vect) // For AVR_PORTC. Required only if used input GPIO interrupts.
+ISR(PCINT2_vect) // For AVR_PORTD. Required only if used input GPIO interrupts.
 {
-    zh_avr_pcf8574_isr_handler();
+    if (zh_avr_pcf8574_isr_handler() == pdTRUE)
+    {
+        portYIELD();
+    }
 }
 ```

include/zh_avr_pcf8574.h

@@ -2,9 +2,11 @@
 
 #include "FreeRTOS.h"
 #include "semphr.h"
+#include "avr/pgmspace.h"
 #include "zh_avr_i2c.h"
 #include "zh_avr_vector.h"
 #include "avr_err.h"
+#include "avr_port.h"
 #include "avr_bit_defs.h"
 
 #define ZH_AVR_PCF8574_INIT_CONFIG_DEFAULT()   \
@@ -20,7 +22,8 @@
         .p5_gpio_work_mode = 0,                \
         .p6_gpio_work_mode = 0,                \
         .p7_gpio_work_mode = 0,                \
-        .interrupt_gpio = 0xFF}
+        .interrupt_gpio = 0xFF,                \
+        .interrupt_port = 0}
 
 #ifdef __cplusplus
 extern "C"
@@ -41,6 +44,7 @@ extern "C"
         bool p6_gpio_work_mode; // Expander GPIO P6 work mode. True for input, false for output.
         bool p7_gpio_work_mode; // Expander GPIO P7 work mode. True for input, false for output.
         uint8_t interrupt_gpio; // Interrupt GPIO. @attention Must be same for all PCF8574 expanders.
+        uint8_t interrupt_port; // Interrupt port.
     } zh_avr_pcf8574_init_config_t;
 
     typedef struct // PCF8574 expander handle.

version.txt

@@ -1 +1 @@
-1.1.0
+1.3.0

zh_avr_pcf8574.c

@@ -1,8 +1,9 @@
 #include "zh_avr_pcf8574.h"
 
 static uint8_t _interrupt_gpio = 0xFF;
+static uint8_t _interrupt_port = 0;
 static SemaphoreHandle_t _interrupt_semaphore = NULL;
-static uint8_t _gpio_matrix[8] = {AVR_BIT0, AVR_BIT1, AVR_BIT2, AVR_BIT3, AVR_BIT4, AVR_BIT5, AVR_BIT6, AVR_BIT7};
+static const uint8_t _gpio_matrix[8] PROGMEM = {AVR_BIT0, AVR_BIT1, AVR_BIT2, AVR_BIT3, AVR_BIT4, AVR_BIT5, AVR_BIT6, AVR_BIT7};
 
 static zh_avr_vector_t _vector = {0};
 
@@ -58,7 +59,7 @@ avr_err_t zh_avr_pcf8574_reset(zh_avr_pcf8574_handle_t *handle)
 avr_err_t zh_avr_pcf8574_read_gpio(zh_avr_pcf8574_handle_t *handle, uint8_t gpio, bool *status)
 {
     ZH_ERROR_CHECK(gpio <= 7, AVR_FAIL);
-    uint8_t gpio_temp = _gpio_matrix[gpio];
+    uint8_t gpio_temp = pgm_read_byte(&_gpio_matrix[gpio]);
     uint8_t reg_temp = 0;
     avr_err_t err = _zh_avr_pcf8574_read_register(handle, &reg_temp);
     *status = ((reg_temp & gpio_temp) ? 1 : 0);
@@ -68,7 +69,7 @@ avr_err_t zh_avr_pcf8574_read_gpio(zh_avr_pcf8574_handle_t *handle, uint8_t gpio
 avr_err_t zh_avr_pcf8574_write_gpio(zh_avr_pcf8574_handle_t *handle, uint8_t gpio, bool status)
 {
     ZH_ERROR_CHECK(gpio <= 7, AVR_FAIL);
-    uint8_t gpio_temp = _gpio_matrix[gpio];
+    uint8_t gpio_temp = pgm_read_byte(&_gpio_matrix[gpio]);
     if (status == true)
     {
         return _zh_avr_pcf8574_write_register(handle, handle->gpio_status | handle->gpio_work_mode | gpio_temp);
@@ -81,7 +82,12 @@ static avr_err_t _zh_avr_pcf8574_validate_config(const zh_avr_pcf8574_init_confi
     ZH_ERROR_CHECK(config != NULL, AVR_ERR_INVALID_ARG);
     ZH_ERROR_CHECK((config->i2c_address >= 0x20 && config->i2c_address <= 0x27) || (config->i2c_address >= 0x38 && config->i2c_address <= 0x3F), AVR_ERR_INVALID_ARG);
     ZH_ERROR_CHECK(config->task_priority > tskIDLE_PRIORITY && config->stack_size >= 124, AVR_ERR_INVALID_ARG);
-    ZH_ERROR_CHECK(config->interrupt_gpio == 0xFF || config->interrupt_gpio == PORTD4 || config->interrupt_gpio == PORTD5 || config->interrupt_gpio == PORTD6 || config->interrupt_gpio == PORTD7, AVR_ERR_INVALID_ARG);
+    ZH_ERROR_CHECK(config->interrupt_gpio == 0xFF || (config->interrupt_gpio >= 0 && config->interrupt_gpio <= 7), AVR_ERR_INVALID_ARG);
+    if (config->interrupt_gpio != 0xFF)
+    {
+        ZH_ERROR_CHECK(config->interrupt_port >= AVR_PORTB && config->interrupt_port <= AVR_PORTD, AVR_ERR_INVALID_ARG);
+        _interrupt_port = config->interrupt_port;
+    }
     return AVR_OK;
 }
 
@@ -114,10 +120,29 @@ static avr_err_t _zh_avr_pcf8574_configure_interrupts(const zh_avr_pcf8574_init_
     ZH_ERROR_CHECK(err == AVR_OK, err);
     err = zh_avr_vector_push_back(&_vector, &handle);
     ZH_ERROR_CHECK(err == AVR_OK, err);
-    DDRD &= ~(1 << _interrupt_gpio);
-    PORTD |= (1 << _interrupt_gpio);
-    PCICR |= (1 << PCIE2);
-    PCMSK2 |= (1 << _interrupt_gpio);
+    switch (_interrupt_port)
+    {
+    case AVR_PORTB:
+        DDRB &= ~(1 << _interrupt_gpio);
+        PORTB |= (1 << _interrupt_gpio);
+        PCICR |= (1 << PCIE0);
+        PCMSK0 |= (1 << _interrupt_gpio);
+        break;
+    case AVR_PORTC:
+        DDRC &= ~(1 << _interrupt_gpio);
+        PORTC |= (1 << _interrupt_gpio);
+        PCICR |= (1 << PCIE1);
+        PCMSK1 |= (1 << _interrupt_gpio);
+        break;
+    case AVR_PORTD:
+        DDRD &= ~(1 << _interrupt_gpio);
+        PORTD |= (1 << _interrupt_gpio);
+        PCICR |= (1 << PCIE2);
+        PCMSK2 |= (1 << _interrupt_gpio);
+        break;
+    default:
+        break;
+    }
     _interrupt_semaphore = xSemaphoreCreateBinary();
     ZH_ERROR_CHECK(_interrupt_semaphore != NULL, AVR_ERR_NO_MEM);
     BaseType_t x_err = xTaskCreate(_zh_avr_pcf8574_isr_processing_task, NULL, config->stack_size, NULL, config->task_priority, NULL);
@@ -132,9 +157,28 @@ static avr_err_t _zh_avr_pcf8574_configure_interrupts(const zh_avr_pcf8574_init_
 BaseType_t zh_avr_pcf8574_isr_handler(void)
 {
     BaseType_t xHigherPriorityTaskWoken = pdFALSE;
-    if ((PIND & (1 << _interrupt_gpio)) == 0)
+    switch (_interrupt_port)
     {
-        xSemaphoreGiveFromISR(_interrupt_semaphore, &xHigherPriorityTaskWoken);
+    case AVR_PORTB:
+        if ((PINB & (1 << _interrupt_gpio)) == 0)
+        {
+            xSemaphoreGiveFromISR(_interrupt_semaphore, &xHigherPriorityTaskWoken);
+        }
+        break;
+    case AVR_PORTC:
+        if ((PINC & (1 << _interrupt_gpio)) == 0)
+        {
+            xSemaphoreGiveFromISR(_interrupt_semaphore, &xHigherPriorityTaskWoken);
+        }
+        break;
+    case AVR_PORTD:
+        if ((PIND & (1 << _interrupt_gpio)) == 0)
+        {
+            xSemaphoreGiveFromISR(_interrupt_semaphore, &xHigherPriorityTaskWoken);
+        }
+        break;
+    default:
+        break;
     }
     return xHigherPriorityTaskWoken;
 }
@@ -163,12 +207,12 @@ static void _zh_avr_pcf8574_isr_processing_task(void *pvParameter)
             }
             for (uint8_t j = 0; j <= 7; ++j)
             {
-                if ((handle->gpio_work_mode & _gpio_matrix[j]) != 0)
+                if ((handle->gpio_work_mode & pgm_read_byte(&_gpio_matrix[j])) != 0)
                 {
-                    if ((old_reg & _gpio_matrix[j]) != (new_reg & _gpio_matrix[j]))
+                    if ((old_reg & pgm_read_byte(&_gpio_matrix[j])) != (new_reg & pgm_read_byte(&_gpio_matrix[j])))
                     {
                         event.gpio_number = j;
-                        event.gpio_level = new_reg & _gpio_matrix[j];
+                        event.gpio_level = new_reg & pgm_read_byte(&_gpio_matrix[j]);
                         extern void zh_avr_pcf8574_event_handler(zh_avr_pcf8574_event_on_isr_t * event);
                         zh_avr_pcf8574_event_handler(&event);
                     }