This commit attempts to use a more cmake-friendly approach when
handling inter-target dependencies. A combination of macros and
include_directories usage provided overzealous compile -I/blah
entries which equates to large catch-all build commands. For
example, the last CXX target contains include directories for nearly
all preceeding targets (~190). Library dependencies were also often
wrong or missing.
* Removed nearly all used of include_directories (swig cmake
commands still appear to need these for generating the swig
command line)
* Updated usage of target_link_libraries in upm_module_init,
also changed to using target_include_directories per target.
This greatly simplifies upm/mixed_module_init usage for libraries
which depend on other libraries (in this project).
example (src/tb7300/CMakeLists.txt)
old:
# upm-libbacnetmstp will bring in libbacnet, I hope
set (reqlibname "upm-bacnetmstp")
include_directories(${BACNET_INCLUDE_DIRS})
include_directories("../bacnetmstp")
upm_module_init()
upm_target_link_libraries(${libname} bacnetmstp)
new:
upm_module_init(bacnetmstp)
The reason here, is that tb7300 depends on bacnetmstp, which
depends on BACNET includes/libs, so tb7300 gets the headers and
libraries transitively via its dependency on bacnetmstp.
* Updated pkg-config .pc file generation flow to reflect changes
with dependencies.
* Create a real target for the interfaces (CXX abstract sensor
classes). Renamed the directory from 'upm/src/upm' to
'upm/src/interfaces' Also changed the install location of the
interface headers to include/upm/interfaces. Updated interface
header usage to reflect this.
* Updated a few sensor libs to use fwd declarations for mraa.
Ideally the UPM libs would do more of this which eases the
burden on anyone building on top of the sensor libraries since
they would not need to know about mraa headers.
* Fixed examples which use symbols not defined in local includes
Signed-off-by: Noel Eck <noel.eck@intel.com>
These changes add the ability to intialize a speaker instance to use a
PWM pin instead of a standard GPIO pin in order to emit sounds.
The current GPIO functionality is fairly constrained by the
implementation -- it only permits playing cerain hardcoded "notes".
The PWM support allows one to emit specific frequencies (currently
between 50-32Khz) using a PWM pin. Of course, you may still be
constrained by the limits of your PWM hardware in the end.
There are a few new functions provided to support this PWM mode. To
use the PWM mode of speaker, use the speaker_init_pwm() initialization
routine instead of speaker_init() (for C). For C++ and the SWIG
languages, pass "true" as the second argument to the constructor to
enable PWM mode. The default is "false", to match current default
behavior (GPIO).
Functions that are not related to a given mode (GPIO vs. PWM) will do
nothing if not usable in that mode.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
uartat is the underlying UART driver, specifically for use with
AT-style command driven devices like modems.
The le910 support is provided in the form of examples that make use
of the uartat driver to interact with the device.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Previously, the C++ and C versions of this driver were separate. Now
the C++ implementation wraps the C implementation.
In addition, the C++ init() function has been deprecated. It
currently does nothing, and examples have been modified to remove it's
calls. This function will be removed in a separate release.
The examples have been further modified to update all detected devices
and print their respective temperatures, instead of only reporting the
on the first device detected.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
* CMake option to enable -Werror as default
* Change to make sure all cxx examples have correct target name
* Added PUBLIC CXX compiler flags to ads1x15 and ozw targets to
work around compiler warnings
* Renamed cmake variable for compiler warnings
Signed-off-by: Noel Eck <noel.eck@intel.com>
Make these just a bit more interesting - continuously change color
and keep updating the lcd. Also, echo the write via printf.
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added C/CXX warning messages similar to MRAA (w/ -Werror).
* Added syslog warning for missing switch cases
* Cleaned up uint vs int usage
* Fixed redifinition errors for C structs
* Added virtual destructors for base classes
* Removed redundant CMAKE_CXX_FLAGS from COMPILE_FLAGS for all three
wrapper languages. The CMAKE_CXX_FLAGS were showing up twice in
the compile commands for the wrappers.
* Added CMake WERROR option to enable/disable warnings as errors for
all targets.
* Disable a handful of compiler warnings for the wrapper cxx files,
this minimizes the number of warnings from auto-generated code).
Signed-off-by: Noel Eck <noel.eck@intel.com>
This driver was developed with a DFRobot SHT10 Temperature and Humidity
sensor. This driver should work on all SHT1X devices.
It requires a 10K pull-up resistor connected to the data pin.
The sensor can be run at differing voltages from 2.5v to 5v.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
* Renamed all files from grovewater to water
* Replaced all instances of grovewater with water
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
* Renamed all files from groverrotary to rotary
* Replaced all instances of groverrotary with rotary
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
This module implements support for the DFRobot EC (Electrical
Conductivity) meter. It relies on the use of the DS18B20 UPM C module
for temperature gathering.
It has a pretty complicated calibration procedure which is somewhat
documented on the DFRobot wiki. Functions have been added to support
changing the various coefficients as desired.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
This module was initially known as GroveCollision. It has been
now changed to Collision. C source and examples added.
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
