The driver implements support for the Omega RH-USB Humidity Probe with
Temperature sensor. It connects via an integrated USB cable, and
appears as a serial port.
It does not currently work with Edison (as of this date) due to
missing ftdi_sio and usbserial kernel support.
It was implemented and tested on the Galileo 2.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
This module implements support for the Veris HWXPHTX Hardware Protocol
Humidity and Temperature Sensor family. It uses MODBUS over an RS485
interface.
This module was developed using libmodbus 3.1.2, and the Veris HWXPHTX.
This sensor supports humidity, and optionally, temperature, slider
switch, and override switch reporting. The HWXPHTX used to develop
this driver did not include the optional slider or override switches,
however support for them is provided.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
This driver was developed using the Veris HD2NVSTA1 humidity
transmitter. The 'T' variant supports a temperature transmitter as
well. Both signals are provided by the device as analog 0-5Vdc or
0-10Vdc outputs.
The A1 variant supports a temperature range of -40C-50C, while the A2
variant supports a range of 0C-50C. Humidity ranges for all devices
in this device family range from 0% to 100% (non-condensing).
Temperature measurement can be disabled by passing -1 as the
temperature analog pin to the constructor.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
This module implements support for the Comet System T3311 Temperature
and Humidity transmitter. It uses MODBUS over an RS232 serial port.
You must have libmodbus v3.1.2 (or greater) installed to compile and
use this driver.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
Initial commit of ADS1x15 adc converter. Support for both ADS1015 12 bit
and ADS1115 16 bit adc.
--signoff
Signed-off-by: Marc Graham <marc@m2ag.net>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
This is a USB device from Numato Labs that is accessed via a UART. It
provides 16 GPIO's, 7 of which can be configured as analog inputs.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
Fun to work on, I have maybe 3 different implementations for this one now.
Submitted version uses GPIOs only, no more PWM thus enhancing compatibility.
Fast writes and busy-wait delays ensure accuracy to a few μs when generating
the step pulses.
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
If MODULE_LIST is set, cmake will only create examples that can be built
with avaialble modules. There has been significant change to cmake file.
Comments show you how to add new examples.
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
This module was developed using the OpenZWave library (v1.3):
http://www.openzwave.com/
It was developed using a collection of devices (switches and a
multi-sensor) connected via an Aeon Z-Stick Gen5 USB dongle.
It can be used to query (and, where appropriate, set) Values on Nodes
connected to the ZWave network.
Checks are made in src/ozw/CMakeLists.txt to ensure that the
libopenzwave library is installed (via pkg-config). If not present,
then neither the module, nor the example will be built.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
This driver was developed using an SX1276 based shield on the Galileo
G2. It requires 3.3v of operation. It does not work with Edison, due
to SPI issues.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
This module was developed and tested on a Grove Ultrasonic Ranger module.
http://www.seeedstudio.com/wiki/Grove_-_Ultrasonic_Ranger
Signed-off-by: Jun Kato <i@junkato.jp>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
Add support for MCP9808 precision temp sensor. Implements all features
except for TCrit and TUpper and TLower locking. Functionality includes
alert, interrupt, resolution and hysteresis control.
Signed-off-by: Marc Graham <marc@m2ag.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
Removed some unneeded calls in update function. Changed call in
micsv89.js sample file to use update instead of start.
Tested with UPM. 4.0. The micsv89 is sensitive to other devices pulling
the I2c bus up, so it is not likely to work on the Arduino breakout.
I2c 1 on mini breakout works fine.
—Signed-off-by Marc Graham <marc@m2ag.net>
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
The driver implements support for the DFRobot pH sensors. It was
tested with both the standard and Pro versions, calibrated with
standard buffer solutions at pH 4.01 and pH 7.0.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
This driver was developed based on the DFRobot Triple Axis
accelerometer BMA220 (Tiny):
http://www.dfrobot.com/index.php?route=product/product&product_id=1085
This device can only run at 3.3v DC. Do not connect to 5v.
Added a private function definition for the installISR function. Done because C++
wasn't able to find the function definition for the java bindings.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
This driver was tested with the DFRobot URM37 Ultrasonic Ranger, V4.
Both UART and analog access modes are supported.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
