TCS37727 is a Color Light-To-Digital Converter.
I also added the manufacturer 'ams' of TCS37727.
Signed-off-by: Norbert Wesp <nwesp@phytec.de>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
MMC35240 is 3-axis magnetic sensor from MEMSIC.
This sensor can measure magnetic fields within the full scale range of
+-24 Gauss (G).
The library provided is libupm-mmc35240.so
The example provided is mmc35240-example-cxx where it will print x,y,z axis
when trigger buffer data is ready. It's also print azimuth value.
This sensor requires calibration. Please shake the sensor in figure 8 pattern,
mmc35240-example will print the calibrated level.
As the sensor data is noisy, we have implemented denoise algorithm within the
sensor library.
The azimuth formula is provided by Han, He <he.han@intel.com>.
Signed-off-by: Lay, Kuan Loon <kuan.loon.lay@intel.com>
Signed-off-by: Mihai Tudor Panu <mihai.tudor.panu@intel.com>
The sainsmartks driver has been reimplemented in it's own, new C/C++
library: lcdks (LCD Keypad Shield).
In addition, support for an optional backlight GPIO was added.
This was tested with the SainsmartKS and DFRobot LCD Keypad Shields.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
The lcm1602 and jhd1313m1 drivers had been rewritten in C with a C++
wrapper some time ago, however the original lcm and jhd drivers were
still present in the lcd library. In addition, to avoid header file
conflicts, the new, separated lcm and jhd header files were renamed
with a .hxx prefix.
This patch:
- renames the new lcm1602/ and jhd1313m1/ header files to have the
usual .hpp prefix.
- removes the lcm1602, jhd1313m1, and sainsmartks drivers from the
lcd/ (i2clcd) library.
- fixes the examples to use the "new" libraries (lcm1602 and
jhd1313m1)
- changes the argument type for the createChar() (C++) to use a byte
vector (std::vector<uint8_t>) rather than a typedef'd char array.
The lcm1602_create_char() function (C) uses a standard char *. The
use of std::vector is well supported by SWIG.
- SWIG interface files changed to use upm_vectortypes.i, and removes
the carrays helpers, which should no longer be needed for these
drivers.
- removes the inclusion of the driver C .h header files into the SWIG
interface files - this should not be needed for these drivers.
- the sainsmartks driver will be placed into it's own new lcdks (LCD
Keypad Shield) library. This library should support the
SainsmartKS, DFRobot LCD Keypad Shield, and similar products from
other manufacturers in a future commit.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
This commit enables the ABP Honeywell sensor. Java examples is
yet to be tested and has not been provided with the current commit
and will be provided in a future commit.
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
The purpose of the templatesensor is to get contributors up and running
faster when adding a new sensor.
* Created library named 'sensortemplate'
* Added C++ source
* Added swig interface files for java, javascript, and python
* Added sensortemplate image file
* Added examples for c++, java, javascript, and python
* Updated contributions.md with steps to create a new sensor from
the sensortemplate library.
Signed-off-by: Noel Eck <noel.eck@intel.com>
These changes add the ability to intialize a speaker instance to use a
PWM pin instead of a standard GPIO pin in order to emit sounds.
The current GPIO functionality is fairly constrained by the
implementation -- it only permits playing cerain hardcoded "notes".
The PWM support allows one to emit specific frequencies (currently
between 50-32Khz) using a PWM pin. Of course, you may still be
constrained by the limits of your PWM hardware in the end.
There are a few new functions provided to support this PWM mode. To
use the PWM mode of speaker, use the speaker_init_pwm() initialization
routine instead of speaker_init() (for C). For C++ and the SWIG
languages, pass "true" as the second argument to the constructor to
enable PWM mode. The default is "false", to match current default
behavior (GPIO).
Functions that are not related to a given mode (GPIO vs. PWM) will do
nothing if not usable in that mode.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
uartat is the underlying UART driver, specifically for use with
AT-style command driven devices like modems.
The le910 support is provided in the form of examples that make use
of the uartat driver to interact with the device.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
* CMake option to enable -Werror as default
* Change to make sure all cxx examples have correct target name
* Added PUBLIC CXX compiler flags to ads1x15 and ozw targets to
work around compiler warnings
* Renamed cmake variable for compiler warnings
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added C/CXX warning messages similar to MRAA (w/ -Werror).
* Added syslog warning for missing switch cases
* Cleaned up uint vs int usage
* Fixed redifinition errors for C structs
* Added virtual destructors for base classes
* Removed redundant CMAKE_CXX_FLAGS from COMPILE_FLAGS for all three
wrapper languages. The CMAKE_CXX_FLAGS were showing up twice in
the compile commands for the wrappers.
* Added CMake WERROR option to enable/disable warnings as errors for
all targets.
* Disable a handful of compiler warnings for the wrapper cxx files,
this minimizes the number of warnings from auto-generated code).
Signed-off-by: Noel Eck <noel.eck@intel.com>
This driver was developed with a DFRobot SHT10 Temperature and Humidity
sensor. This driver should work on all SHT1X devices.
It requires a 10K pull-up resistor connected to the data pin.
The sensor can be run at differing voltages from 2.5v to 5v.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
* Renamed all files from grovewater to water
* Replaced all instances of grovewater with water
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
* Renamed all files from groverrotary to rotary
* Replaced all instances of groverrotary with rotary
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
This module implements support for the DFRobot EC (Electrical
Conductivity) meter. It relies on the use of the DS18B20 UPM C module
for temperature gathering.
It has a pretty complicated calibration procedure which is somewhat
documented on the DFRobot wiki. Functions have been added to support
changing the various coefficients as desired.
Signed-off-by: Jon Trulson <jtrulson@ics.com>
This module was initially known as GroveCollision. It has been
now changed to Collision. C source and examples added.
Signed-off-by: Abhishek Malik <abhishek.malik@intel.com>
Added C source for rotary angle sensor
* Renamed all files from groverrotary to rotary
* Replaced all instances of groverrotary with rotary
* Added C source for rotary angle sensor
* Updated all CMake files
Signed-off-by: Sisinty Sasmita Patra <sisinty.s.patra@intel.com>
Added the C source for the flex sensor with necessary changes to cmake,
examples, and docs.
* Renamed all files with groveslide to slide
* Replaced all instances of groveslide with slide
* Added C source for slide sensor
* Updated all cmake files
* Added C example for slide sensor
* Split out slide sensor from grove library
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the light sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with grovelight to light
* Replaced all instances of grovelight with light
* Added C source for light sensor
* Updated all cmake files
* Added C example for light sensor
* Split out light sensor from grove library
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the gsr sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with grovegsr to gsr
* Replaced all instances of grovegsr with gsr
* Added C source for gsr sensor
* Updated all cmake files
* Added C example for gsr sensor
* Fixed C++ threshold method from throwing on a successfull aio read
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the emg sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with groveemg to emg
* Replaced all instances of groveemg with emg
* Added C source for emg sensor
* Updated all cmake files
* Added C example for emg sensor
Signed-off-by: Noel Eck <noel.eck@intel.com>
Added the C source for the O2 sensor with necessary changes to cmake,
examples, docs.
* Renamed all files with groveo2 to o2
* Replaced all instances of groveo2 with o2
* Added C source for o2 sensor
* Updated all cmake files
* Added C example for o2 sensor
Signed-off-by: Noel Eck <noel.eck@intel.com>
* Removed unessesary spaces.
* Changed INFO to STATUS since INFO is not a cmake message
keyword.
* Changed a few messages from status/info to warning.
* Fixed trailing carriage return on yuidoc execute_process.
* Removed my debug messages for CXX vs C.
Signed-off-by: Noel Eck <noel.eck@intel.com>
